expiredTattyBear | Staff posted Dec 12, 2023 11:58 PM
Item 1 of 3
Item 1 of 3
expiredTattyBear | Staff posted Dec 12, 2023 11:58 PM
Monoprice Benchtop CNC Router Engraver/Carver Kit
+ Free Shipping$152
$300
49% offMonoprice
Visit MonopriceGood Deal
Bad Deal
Save
Share
Leave a Comment
Top Comments
If you need to cut small stuff using woods, then it will do the job. Overall, it's a decent little machine to get you into CNC. But if you want to get into something bigger like woodworking, I'd get an x-carve or shapeoko or onefinity
70 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank scraejtp
E.g. https://www.amazon.com/Engraving-...PRQW/?th=1
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank DealDaddyy
Our community has rated this post as helpful. If you agree, why not thank zelda131292
If you need to cut small stuff using woods, then it will do the job. Overall, it's a decent little machine to get you into CNC. But if you want to get into something bigger like woodworking, I'd get an x-carve or shapeoko or onefinity
Our community has rated this post as helpful. If you agree, why not thank wherestheanykey
If you want to do aluminum regularly, search for its bigger brother (CNC3040) or research gantry and spindle upgrades.
Sign up for a Slickdeals account to remove this ad.
As far as I'm concerned though, DIY PCBs aren't worth it unless you're training for a job where you'll need crazy short lead times, because you have to do the vias by hand, you don't get solder mask unless you DIY that too, and custom PCBs are just so cheap from professional fabs.
I'd sure rather use one of these than deal with DIY etching chemicals though!
Leave a Comment