This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
The $15 shipping really kills the deal as it's more than half the cost of the item IMO.
I've been waiting for a 50% off with free shipping Direct Tools deal for months now as I would like a chance to stock up on some factory blemish Ryobi One+ tools. In my experience; factory blemish is basically new with very little if any cosmetic damage...
I bought this a few years ago on sale ... Real mediocre performance in my opinion. Fine for dabbling and learning maybe, but seems really under powered or temp fluctuates.
I watched the video and he states at the end that he never actually used the iron. He was just disappointed and confounded with some of the decisions made in the iron's construction.
Some parts like the plastic molding and the iron itself are manufactured superbly yet the cord connected to the iron is terrible, the motherboard's construction is disappointing, and the power supply is an odd but acceptable choice.
Overall, the review is a mixed bag given the fact he never actually used the thing which is pretty lazy of him considering the effort and time he spent deconstructing it. (If I had to guess, he probably broke it by taking it apart ergo he couldn't use it)
As for the best soldering Iron overall; the Hakko FX888[amazon.com] is praised for its quality and longevity. I however hate the accursed thing because its UI is terrible. It's a big esoteric procedure just to adjust the temperature and you will need to read the manual to decipher its crappy UI.
I don't solder often, about once every three months, so I forget how to adjust the temp and need to read the manual every time I try to use it. Adjusting temperature on an iron should not be so frustrating and counter intuitive. Perhaps I'm an idiot though as the Hakko FX888 is indeed well regarded, highly rated and most think it's the best price to quality ratio you are going to get...
Last edited by Guy767 December 31, 2023 at 05:03 AM.
I watched the video and he states at the end that he never actually used the iron. He was just disappointed and confounded with some of the decisions made in the iron's construction.
Some parts like the plastic molding and the iron itself are manufactured superbly yet the cord connected to the iron is terrible, the motherboard's construction is disappointing, and the power supply is an odd but acceptable choice.
Overall, the review is a mixed bag given the fact he never actually used the thing which is pretty lazy of him considering the effort and time he spent deconstructing it. (If I had to guess, he probably broke it by taking it apart ergo he couldn't use it)
As for the best soldering Iron overall; the Hakko FX888[amazon.com] is praised for its quality and longevity. I however hate the accursed thing because its UI is terrible. It's a big esoteric procedure just to adjust the temperature and you will need to read the manual to decipher its crappy UI.
I don't solder often, about once every three months, so I forget how to adjust the temp and need to read the manual every time I try to use it. Adjusting temperature on an iron should not be so frustrating and counter intuitive. Perhaps I'm an idiot though as the Hakko FX888 is indeed well regarded, highly rated and most think it's the best price to quality ratio you are going to get...
LOL, a review video in which he never actually used the product, that's hilarious.
This, or a Hakko fx888 are OK irons if you were to buy them 10 years ago, but today there are better and cheaper alternatives. Look for one with an integrated tip, like t12, there are plenty alternatives with different power options. Or, search for TS101 or T85 for amazing small irons that can be powered from a PD USB 3 adapter or any tool battery. All for under $30 shipped. To be battery operated, you may need to make an adapter for your specific battery, but if you are buying a soldering iron, that should be within the scope. The integrated tips offer faster heat and more precise control, even compared to fx888. I sometimes use fx888, and agree on the UI being so esoteric that it's barely usable.
This, or a Hakko fx888 are OK irons if you were to buy them 10 years ago, but today there are better and cheaper alternatives. Look for one with an integrated tip, like t12, there are plenty alternatives with different power options. Or, search for TS101 or T85 for amazing small irons that can be powered from a PD USB 3 adapter or any tool battery. All for under $30 shipped. To be battery operated, you may need to make an adapter for your specific battery, but if you are buying a soldering iron, that should be within the scope. The integrated tips offer faster heat and more precise control, even compared to fx888. I sometimes use fx888, and agree on the UI being so esoteric that it's barely usable.
Great info and I am glad I'm not the only one that finds Hakko FX888's UI ridiculous and a pain to use.
It's funny that you mention 10 years because that's approximately the last time I did research what was the best soldering station. back then I came to the conclusion that the Hakko FX888 was the best bang for the buck.
I would give you rep but that option seems to be disabled; I'm assuming it's because you are a new member here. Hopefully I'll be able to give you some in a few weeks time...
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
15 Comments
Sign up for a Slickdeals account to remove this ad.
I've been waiting for a 50% off with free shipping Direct Tools deal for months now as I would like a chance to stock up on some factory blemish Ryobi One+ tools. In my experience; factory blemish is basically new with very little if any cosmetic damage...
RYOBI 18V ONE+ HP Brushless 4-Mode 1/2" Impact Wrench https://www.directtools
RYOBI 18V ONE+ Magnifying Clamp Light https://www.directtools
Youtube video: https://www.youtube.com/watch?v=0xUqBB4
RYOBI 18V ONE+ HP Brushless 4-Mode 1/2" Impact Wrench https://www.directtools
RYOBI 18V ONE+ Magnifying Clamp Light https://www.directtoolsoutlet.com...ct/PCL664B [directtoolsoutlet.com]
Sign up for a Slickdeals account to remove this ad.
Youtube video: https://www.youtube.com/watch?v=0xUqBB4
Some parts like the plastic molding and the iron itself are manufactured superbly yet the cord connected to the iron is terrible, the motherboard's construction is disappointing, and the power supply is an odd but acceptable choice.
Overall, the review is a mixed bag given the fact he never actually used the thing which is pretty lazy of him considering the effort and time he spent deconstructing it. (If I had to guess, he probably broke it by taking it apart ergo he couldn't use it)
As for the best soldering Iron overall; the Hakko FX888 [amazon.com] is praised for its quality and longevity. I however hate the accursed thing because its UI is terrible. It's a big esoteric procedure just to adjust the temperature and you will need to read the manual to decipher its crappy UI.
I don't solder often, about once every three months, so I forget how to adjust the temp and need to read the manual every time I try to use it. Adjusting temperature on an iron should not be so frustrating and counter intuitive. Perhaps I'm an idiot though as the Hakko FX888 is indeed well regarded, highly rated and most think it's the best price to quality ratio you are going to get...
Some parts like the plastic molding and the iron itself are manufactured superbly yet the cord connected to the iron is terrible, the motherboard's construction is disappointing, and the power supply is an odd but acceptable choice.
Overall, the review is a mixed bag given the fact he never actually used the thing which is pretty lazy of him considering the effort and time he spent deconstructing it. (If I had to guess, he probably broke it by taking it apart ergo he couldn't use it)
As for the best soldering Iron overall; the Hakko FX888 [amazon.com] is praised for its quality and longevity. I however hate the accursed thing because its UI is terrible. It's a big esoteric procedure just to adjust the temperature and you will need to read the manual to decipher its crappy UI.
I don't solder often, about once every three months, so I forget how to adjust the temp and need to read the manual every time I try to use it. Adjusting temperature on an iron should not be so frustrating and counter intuitive. Perhaps I'm an idiot though as the Hakko FX888 is indeed well regarded, highly rated and most think it's the best price to quality ratio you are going to get...
It's funny that you mention 10 years because that's approximately the last time I did research what was the best soldering station. back then I came to the conclusion that the Hakko FX888 was the best bang for the buck.
I would give you rep but that option seems to be disabled; I'm assuming it's because you are a new member here. Hopefully I'll be able to give you some in a few weeks time...
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!