Avanti Pro 7-1/4 in x 24-Tooth Framing Circular Saw Blades 2 Pak - $2.02
$2.02
$7.97
+13Deal Score
13,398 Views
I went to my local Home Depot store today. I found these saw blades in one of the end-cap clearance section. YMMV. My Home Depot had about 20-30 left. I picked up 5.
I went to my local Home Depot store today. I found these saw blades in one of the end-cap clearance section. YMMV. My Home Depot had about 20-30 left. I picked up 5.
Thanks for the heads-up! I bought 30 pair as I'm splitting them with a friends. These blades are good enough for framing or demo and if you mess em up? Who really cares at a buck a blade. 😆
Thanks for the heads-up! I bought 30 pair as I'm splitting them with a friends. These blades are good enough for framing or demo and if you mess em up? Who really cares at a buck a blade. 😆
They won't last for framing and will be destroyed in the first use for demo. This is what I do for a living so don't expect too much out of these
They won't last for framing and will be destroyed in the first use for demo. This is what I do for a living so don't expect too much out of these
If you're familiar with a Diablo framer the blade cuts and looks similar except their respective colors. Both are ATB. The gullets are shaped differently but are similar sizes. Tooth and blade thickness seem the same. (I don't have a mic at job to check exactly) The expansion slots are different looking and the Avanti has cut outs while the Diablo doesn't. I didn't use my reg worm drive demo as it's at shop so I used my PC743 instead because that was here. I cut across a bunch of nail embedded junk 1x & 2x material with sparks flying and no issues. So then I cut 2 square cut nails in half. They were both nailed into a 2x4. I chipped one tooth on the second one. So my initial thought still stands: these are only a buck a blade and work fine. (I also do this stuff for a living)
Edit to clarify: i cut the two nails in half lengthwise in two separate passes
7 Comments
Your comment cannot be blank.
Sign up for a Slickdeals account to remove this ad.
This brickseek worked for me:
https://brickseek.com/home-depot-...+202024407
This brickseek worked for me:
https://brickseek.com/home-depot-...+202024407 [brickseek.com]
Amazing!
They won't last for framing and will be destroyed in the first use for demo. This is what I do for a living so don't expect too much out of these
Edit to clarify: i cut the two nails in half lengthwise in two separate passes