expired
Makita B-65399 Impact Gold 14 Pc. Titanium Coating Drill Bit Set, 1/4 In. Hex Shank $11 + Free Shipping w/ Prime or on $35+
$11
$29
62% off
Amazon
Missed This Deal? Get alerts when similar deals are posted.
AmazonDeal Details
Amazon [amazon.com] has Makita B-65399 Impact Gold 14 Pc. Titanium Coating Drill Bit Set, 1/4 In. Hex Shank on sale for $11
Shipping is free w/ Amazon Prime or on $35+
Description
Shipping is free w/ Amazon Prime or on $35+
Description
- Titanium nitride (TiN) coating lasts 2.5x longer than non-coated bits
- 135 degree split point geometry for faster starts and reduced walking
- Impact rated: For use in 1/4 inches Hex impact drivers
- For drilling holes in ferrous metal, wood, plastic, non-ferrous metal, cast iron and stainless steel
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Amazon [amazon.com] has Makita B-65399 Impact Gold 14 Pc. Titanium Coating Drill Bit Set, 1/4 In. Hex Shank on sale for $11
Shipping is free w/ Amazon Prime or on $35+
Description
Shipping is free w/ Amazon Prime or on $35+
Description
- Titanium nitride (TiN) coating lasts 2.5x longer than non-coated bits
- 135 degree split point geometry for faster starts and reduced walking
- Impact rated: For use in 1/4 inches Hex impact drivers
- For drilling holes in ferrous metal, wood, plastic, non-ferrous metal, cast iron and stainless steel
Community Voting
Deal
Score
+16
Good Deal
Bad Deal
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
13 Comments
Sign up for a Slickdeals account to remove this ad.
Is the impact function even utilized in drilling applications? I thought impact function was for driving large lag screws, for example
Is the impact function even utilized in drilling applications? I thought impact function was for driving large lag screws, for example
Great set, I've had mine for years and have only had to replace a few smaller ones (~1/8" probably). I personally use mine with the flexi-click/chameleon offset adapter, since it only accepts hex shanks. Same would go for the Milwaukee offset solution, I would think. You can also use them without any "-click" adapter in a pinch, since a hex hole drives those adapters.
Mine have a decent amount of... run-out? like if you look at them while turning (even in a standard drill chuck) they orbit the center slightly, as if they are a little bent. Could be the age of mine, but I suspect it is because they are not unibody. If you want something cheap as an EDC, these are great. Otherwise look at something unibody, if they even make hex shank bits like that. Edit: just checked and the 5/16, 3/8, and 1/2 are unibody, fwiw
Great set, I've had mine for years and have only had to replace a few smaller ones (~1/8" probably). I personally use mine with the flexi-click/chameleon offset adapter, since it only accepts hex shanks. Same would go for the Milwaukee offset solution, I would think. You can also use them without any "-click" adapter in a pinch, since a hex hole drives those adapters.
Mine have a decent amount of... run-out? like if you look at them while turning (even in a standard drill chuck) they orbit the center slightly, as if they are a little bent. Could be the age of mine, but I suspect it is because they are not unibody. If you want something cheap as an EDC, these are great. Otherwise look at something unibody, if they even make hex shank bits like that. Edit: just checked and the 5/16, 3/8, and 1/2 are unibody, fwiw
Great set, I've had mine for years and have only had to replace a few smaller ones (~1/8" probably). I personally use mine with the flexi-click/chameleon offset adapter, since it only accepts hex shanks. Same would go for the Milwaukee offset solution, I would think. You can also use them without any "-click" adapter in a pinch, since a hex hole drives those adapters.
Mine have a decent amount of... run-out? like if you look at them while turning (even in a standard drill chuck) they orbit the center slightly, as if they are a little bent. Could be the age of mine, but I suspect it is because they are not unibody. If you want something cheap as an EDC, these are great. Otherwise look at something unibody, if they even make hex shank bits like that. Edit: just checked and the 5/16, 3/8, and 1/2 are unibody, fwiw
Sign up for a Slickdeals account to remove this ad.
Is the impact function even utilized in drilling applications? I thought impact function was for driving large lag screws, for example
The con is they are more expensive than the drill bits without ¼ shanks.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!