Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
Missed This Deal? Get alerts when similar deals are posted.
expired
expired
gabe23111 63.4K Views
Dec 11, 2024 9:07 PM

New Customers: 1kg polymaker Panchroma CoPE 1.75mm 3D Printer Filament

$9.35

$22

57% off
+ Free Shippingat Polymaker
Visit Polymaker
Good Deal?
120Comments
Save
Share
Deal Details
polymaker has for New Customers: 1kg polymaker Panchroma CoPE 1.75mm 3D Printer Filament (Various Colors) on sale for $11 - $1.65 with new customer discount code POLYMAKERFIRSTTRY during checkout = $9.35. Shipping is free.

Thanks to Community Member gabe23111 for sharing this deal.
  • Note: Offer is valid only on a single spool.
About this Item:
  • Panchroma Cope is a new experimental product that is not PLA - it is CoPE. It prints with very similar settings as PLA but can achieve better overhangs at faster speeds.
  • That said - it does not stick to PLA very well and therefore should not be combined with other Panchroma PLA Products in a single print. It also sticks very well to textured PEI plates, therefore we only recommend using Panchroma CoPE with a textured PEI plate if used with Magigoo Original.
  • Specs:
    • Printing Temperature: 190˚C - 230˚C
    • Bed Temperature: 25˚C - 60˚C
    • Printing Speed: up to 400mm/s
    • Fan: ON
    • Direct Drive:
    • Retraction Distance: 1mm
    • Retraction Speed: 20mm/s
    • Indirect Drive:
    • Retraction Distance: 3mm
    • Retraction Speed: 40mm/s
    • Drying Settings: 55˚C for 6h

Editor's Notes

Written by SaltyOne | Staff
  • Offer valid for a limited time only / while supplies last.
Please see the original post for additional details & refer to the comments below for discussion.

Original Post

Written by gabe23111
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
polymaker has for New Customers: 1kg polymaker Panchroma CoPE 1.75mm 3D Printer Filament (Various Colors) on sale for $11 - $1.65 with new customer discount code POLYMAKERFIRSTTRY during checkout = $9.35. Shipping is free.

Thanks to Community Member gabe23111 for sharing this deal.
  • Note: Offer is valid only on a single spool.
About this Item:
  • Panchroma Cope is a new experimental product that is not PLA - it is CoPE. It prints with very similar settings as PLA but can achieve better overhangs at faster speeds.
  • That said - it does not stick to PLA very well and therefore should not be combined with other Panchroma PLA Products in a single print. It also sticks very well to textured PEI plates, therefore we only recommend using Panchroma CoPE with a textured PEI plate if used with Magigoo Original.
  • Specs:
    • Printing Temperature: 190˚C - 230˚C
    • Bed Temperature: 25˚C - 60˚C
    • Printing Speed: up to 400mm/s
    • Fan: ON
    • Direct Drive:
    • Retraction Distance: 1mm
    • Retraction Speed: 20mm/s
    • Indirect Drive:
    • Retraction Distance: 3mm
    • Retraction Speed: 40mm/s
    • Drying Settings: 55˚C for 6h

Editor's Notes

Written by SaltyOne | Staff
  • Offer valid for a limited time only / while supplies last.
Please see the original post for additional details & refer to the comments below for discussion.

Original Post

Written by gabe23111

Community Voting

Deal Score
+102
Good Deal
Visit Polymaker

Top Comments

namsupak
40Comments
21Reputation
Note from their page: "Not recommended to be printed on textured PEI as this material has an extra high bed adhesion properties and can damage the bed."
Go to Comment
dtgolder
1KComments
391Reputation
Probably the most important question...here's the MSDS:

https://cdn.shopify.com/s/files/1...1731608271

Pretty vague--"ensure adequate ventilation", and "use personal protective equipment" and "evacuate personnel to safe areas"

And all the Toxicological information is "not available" or "not classified".

Not enough information there to even hazard a guess...so it's a hard "no" for me.
Go to Comment
ScarletRiver3270
110Comments
26Reputation
Can't mix with other colors AND it damages your textured plate??

That's rough...
Go to Comment

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

120 Comments

Sign up for a Slickdeals account to remove this ad.

Dec 12, 2024 5:03 AM
2.7K Comments
Joined Dec 2007
reicadenDec 12, 2024 5:03 AM
2.7K Comments
Quote from Undefined.null View quoted comment :
Post: That said - it does not stick to PLA very well and therefore should not be combined with other Panchroma™ PLA Products in a single print. It also sticks very well to textured PEI plates, therefore we only recommend using Panchroma™ CoPE with a textured PEI plate if used with Magigoo Original.

Note from page: "Not recommended to be printed on textured PEI as this material has an extra high bed adhesion properties and can damage the bed."

Hmmm... who to believe here lol
Arnt they saying the same thing?
Pro
Dec 12, 2024 5:06 AM
3.4K Comments
Joined Nov 2010
Elon69
Pro
Dec 12, 2024 5:06 AM
3.4K Comments
Quote from Undefined.null View quoted comment :
Post: That said - it does not stick to PLA very well and therefore should not be combined with other Panchroma™ PLA Products in a single print. It also sticks very well to textured PEI plates, therefore we only recommend using Panchroma™ CoPE with a textured PEI plate if used with Magigoo Original.

Note from page: "Not recommended to be printed on textured PEI as this material has an extra high bed adhesion properties and can damage the bed."

Hmmm... who to believe here lol
I have the super tact plate. I sometimes need to heat up the bed to take the item off easier

PTEG has been sticking harder on my PEI textured original plate too. Add more heat and it come off easier.

I think will use the smooth plate with this filament and do the heat up method if it gets stuck but shouldn't on the smooth plate
Dec 12, 2024 5:09 AM
268 Comments
Joined Sep 2021
InflationHaterDec 12, 2024 5:09 AM
268 Comments
Is the deal good for 4 spools of different colors, so 1 each? Does anyone know for sure about AMS compatibility?
Dec 12, 2024 5:09 AM
2.4K Comments
Joined Oct 2009
brossowDec 12, 2024 5:09 AM
2.4K Comments
Quote from Undefined.null View quoted comment :
Post: That said - it does not stick to PLA very well and therefore should not be combined with other Panchroma™ PLA Products in a single print. It also sticks very well to textured PEI plates, therefore we only recommend using Panchroma™ CoPE with a textured PEI plate if used with Magigoo Original.

Note from page: "Not recommended to be printed on textured PEI as this material has an extra high bed adhesion properties and can damage the bed."

Hmmm... who to believe here lol
They're saying only use it with a textured plate IF you use Magigoo as well. Both say essentially the same thing, just confusingly. 🙂
Dec 12, 2024 5:11 AM
2.4K Comments
Joined Oct 2009
brossowDec 12, 2024 5:11 AM
2.4K Comments
Quote from InflationHater View quoted comment :
Is the deal good for 4 spools of different colors, so 1 each? Does anyone know for sure about AMS compatibility?
CORRECTED: It's a single-use code but appears to apply to every roll in the order. I ordered three rolls in different colors and got $4.95 off. Just started checking out in an incognito tab with a new order to test and it applied to all rolls, even multiple of the same color. Now kinda wish I'd ordered more. Might create a new account to do so.

Don't see any reason it wouldn't work with AMS. Will know soon. 😅
Last edited by brossow December 11, 2024 at 09:46 PM.
Dec 12, 2024 5:11 AM
268 Comments
Joined Sep 2021
InflationHaterDec 12, 2024 5:11 AM
268 Comments
I wish the PPS-CF was this price.
1
Dec 12, 2024 5:14 AM
268 Comments
Joined Sep 2021
InflationHaterDec 12, 2024 5:14 AM
268 Comments
Quote from brossow View quoted comment :
No, one spool total. At only $11 on sale, I ordered other colors anyway to give it a try. Don't see any reason it wouldn't work with AMS. Will know soon. 😅
Please let me know it goes with your AMS by replying to this comment (so I get the notification). The one I use isn't mine, so I don't wanna break it.
1

Sign up for a Slickdeals account to remove this ad.

Dec 12, 2024 5:19 AM
980 Comments
Joined Nov 2013
tCLOCKDec 12, 2024 5:19 AM
980 Comments
Just use blue painters tape on the plate.
Dec 12, 2024 5:25 AM
10.4K Comments
Joined Nov 2013
AdelleyDec 12, 2024 5:25 AM
10.4K Comments
Dang, no pink =/
Dec 12, 2024 6:21 AM
297 Comments
Joined May 2014
JeffreyJ7022Dec 12, 2024 6:21 AM
297 Comments
Got 3. Black, purple and teal. Going to just send it with my AMS on my P1S onto a Biqu cryogrip plate and see what happens. It can damage PEI? Maybe I won't be able to get it off the cryogrip
Dec 12, 2024 6:54 AM
1.1K Comments
Joined Sep 2023
RockHardRockCrawlerDec 12, 2024 6:54 AM
1.1K Comments
What is CoPE? Is it safe to print health-wise?
1
Dec 12, 2024 7:12 AM
1.4K Comments
Joined Aug 2013
TalA9559Dec 12, 2024 7:12 AM
1.4K Comments
Quote from JeffreyJ7022 View quoted comment :
Got 3. Black, purple and teal. Going to just send it with my AMS on my P1S onto a Biqu cryogrip plate and see what happens. It can damage PEI? Maybe I won't be able to get it off the cryogrip
Aren't you having trouble using cardboard spools in the AMS?
I've printed adapters but the they increase the spool's diameter. The AMS door won't close.
Dec 12, 2024 7:47 AM
332 Comments
Joined Jun 2011
rexqmanDec 12, 2024 7:47 AM
332 Comments
Quote from TalA9559 View quoted comment :
Aren't you having trouble using cardboard spools in the AMS?
I've printed adapters but the they increase the spool's diameter. The AMS door won't close.
I have no problems with cardboard spools that are glued. Ive printed adapters for elegoo filament and they fit perfectly fine in my AMS. Ive also run other poly maker cardboard spools in the AMS. No issues. These will prob be fine too.
Dec 12, 2024 9:05 AM
702 Comments
Joined May 2010
grablifeDec 12, 2024 9:05 AM
702 Comments
Confirm coupon works on multiple rolls. Ordered 10 rolls and came out to just over 100 after tax for a premium filament manufacturer.

Sign up for a Slickdeals account to remove this ad.

Original Poster
Pro
Expert
This user is an Expert in Home & Home Improvement
Dec 12, 2024 10:14 AM
17.7K Comments
Joined Jul 2008
gabe23111Dec 12, 2024 10:14 AM
Original Poster
Pro
Expert
This user is an Expert in Home & Home Improvement
17.7K Comments
Quote from TalA9559 View quoted comment :
Aren't you having trouble using cardboard spools in the AMS?
I've printed adapters but the they increase the spool's diameter. The AMS door won't close.
Depending on the roll or brand I sometimes use electrical tape around the outside of the spool. That works for every cardboard roll. I generally use adapters though as once you have them printed, it's quicker to slip them on than electrical tape. I have quite a few different size of adapters but due to the variance of cardboard spool adapters, sometimes they just don't fit in any of my adapters.

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

Related Searches

ComputersPrinters3D PrintersFree ShippingOccasionsChristmasCyber Monday