Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
Missed This Deal? Get alerts when similar deals are posted.
expired
expired
gabe23111 229K Views
Feb 17, 2025 2:35 PM

Pre-Order: Elegoo Centauri Carbon 3D Printer

$300

+ S/Hat ELEGOO
Visit ELEGOO

Why are you downvoting this deal?

Good Deal?
394Comments
Save
Share
Deal Details
Update: This popular deal is still available.

ELEGOO has for Pre-Order: Elegoo Centauri Carbon 3D Printer for $299.99. Shipping costs start from $30 (may vary by location).

Thanks to community member gabe23111 for sharing this deal.

Note: This printer is estimated to ship before June 30, 2025.

Features:
  • Print Right Out of the Box
  • Full-Auto Calibration
  • CoreXY with 500 mm/s Velocity
  • 20,000 mm/s² Acceleration
  • Unleash Creativity with Every Filament
  • Chamber Camera Acts as Your Eyes
  • Build Volume 256 Ă— 256 Ă— 256 mm

Editor's Notes

Written by persian_mafia | Staff
  • Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.

Original Post

Written by gabe23111
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Update: This popular deal is still available.

ELEGOO has for Pre-Order: Elegoo Centauri Carbon 3D Printer for $299.99. Shipping costs start from $30 (may vary by location).

Thanks to community member gabe23111 for sharing this deal.

Note: This printer is estimated to ship before June 30, 2025.

Features:
  • Print Right Out of the Box
  • Full-Auto Calibration
  • CoreXY with 500 mm/s Velocity
  • 20,000 mm/s² Acceleration
  • Unleash Creativity with Every Filament
  • Chamber Camera Acts as Your Eyes
  • Build Volume 256 Ă— 256 Ă— 256 mm

Editor's Notes

Written by persian_mafia | Staff
  • Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.

Original Post

Written by gabe23111

Community Voting

Deal Score
+164
Good Deal
Bad Deal

Why are you downvoting this deal?

Visit ELEGOO

Top Comments

NotAChanceAce
120Comments
78Reputation
This is tempting, but I got burned by Elegoo on the Neptune 3, when they released the Neptune 3 Pro 6 months later and all firmware updates on the 3 stopped entirely. The Marlin and Klipper community never had an officially supported config (it's been a while since I checked) due to garbage documentation of the board they used.

Lots of people raised this issue on Reddit, Facebook etc, and Elegoo pretty much said too bad.

Hard for me to trust initial releases after that, especially when a lot of "reviews" thus far are from paid YouTubers.

Just my 2 cents.
Go to Comment
metlfan2003
922Comments
577Reputation
This is not a resin printer; it's a FDM printer that uses rolls of filament. Here is a link that explains the differences. [formlabs.com]
Go to Comment
nemo3xm
16Comments
14Reputation
I found you can use promo code SASE10 to take off another $10. Helps take the shipping cost down.
Go to Comment

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

394 Comments

Sign up for a Slickdeals account to remove this ad.

Feb 17, 2025 4:24 PM
37 Comments
Joined Jun 2021
TealGazelle3467Feb 17, 2025 4:24 PM
37 Comments
I used "Demand15f" for $15 off.
Feb 17, 2025 4:27 PM
455 Comments
Joined Apr 2013
KamiNoYamiFeb 17, 2025 4:27 PM
455 Comments
Wish I saw those codes before hand. Oh well. Got the $350 bundle with 2kg of wood filled filament, anti vibration feet, and 3 extra build plates that look to have texture on them. Seems reasonable. Was looking to buy this based on reviews but would've waited for sale if it was $500. At this price it's a no brainer since I've been having issues with my 4 pro anyways.
Feb 17, 2025 4:29 PM
46 Comments
Joined Nov 2021
srikp1Feb 17, 2025 4:29 PM
46 Comments
A noob question - if I wanted to do some resin based 3d printing, is this a good one? I have zero experience in 3D printing and trying to get one for my wife's dental office.
2
Feb 17, 2025 4:36 PM
922 Comments
Joined Apr 2005
metlfan2003Feb 17, 2025 4:36 PM
922 Comments

Our community has rated this post as helpful. If you agree, why not thank

Quote from srikp1 View quoted comment :
A noob question - if I wanted to do some resin based 3d printing, is this a good one? I have zero experience in 3D printing and trying to get one for my wife's dental office.
This is not a resin printer; it's a FDM printer that uses rolls of filament. Here is a link that explains the differences. [formlabs.com]
9
Feb 17, 2025 4:37 PM
102 Comments
Joined Nov 2004
jason879Feb 17, 2025 4:37 PM
102 Comments

Our community has rated this post as helpful. If you agree, why not thank

Quote from nemo3xm View quoted comment :
I found you can use promo code SASE10 to take off another $10. Helps take the shipping cost down.
found another code MK10OFF taking $10 off as well.
The $15 seems like not working for this item.
Demand15f discount code isn't valid for the items in your cart
1
1
Feb 17, 2025 4:40 PM
46 Comments
Joined Nov 2021
srikp1Feb 17, 2025 4:40 PM
46 Comments
Quote from metlfan2003 View quoted comment :
This is not a resin printer; it's a FDM printer that uses rolls of filament. Here is a link that explains the differences. [formlabs.com]
Any suggestion for a good 3D printer for us to get started. Nothing too fancy. I want to try first before splurging on a good printer.
Feb 17, 2025 4:40 PM
1.1K Comments
Joined Sep 2011
slickloreyFeb 17, 2025 4:40 PM
1.1K Comments
Quote from KamiNoYami View quoted comment :
Wish I saw those codes before hand. Oh well. Got the $350 bundle with 2kg of wood filled filament, anti vibration feet, and 3 extra build plates that look to have texture on them. Seems reasonable. Was looking to buy this based on reviews but would've waited for sale if it was $500. At this price it's a no brainer since I've been having issues with my 4 pro anyways.
Do you need to buy or add the extruder for 19.99?

Sign up for a Slickdeals account to remove this ad.

Feb 17, 2025 4:41 PM
120 Comments
Joined Jan 2013
NotAChanceAceFeb 17, 2025 4:41 PM
120 Comments

Our community has rated this post as helpful. If you agree, why not thank

This is tempting, but I got burned by Elegoo on the Neptune 3, when they released the Neptune 3 Pro 6 months later and all firmware updates on the 3 stopped entirely. The Marlin and Klipper community never had an officially supported config (it's been a while since I checked) due to garbage documentation of the board they used.

Lots of people raised this issue on Reddit, Facebook etc, and Elegoo pretty much said too bad.

Hard for me to trust initial releases after that, especially when a lot of "reviews" thus far are from paid YouTubers.

Just my 2 cents.
14
Feb 17, 2025 4:42 PM
455 Comments
Joined Apr 2013
KamiNoYamiFeb 17, 2025 4:42 PM
455 Comments
Quote from slicklorey View quoted comment :
Do you need to buy or add the extruder for 19.99?
The bundle came with an extra hot end but that's more for replacement purposes. The printer should come with the extruder already.
Feb 17, 2025 4:42 PM
231 Comments
Joined Nov 2018
DAN-T9671Feb 17, 2025 4:42 PM
231 Comments
Think this is cool ordered one. Last printer i had was a monoprice mini. What should i expect with this one?
Feb 17, 2025 4:42 PM
225 Comments
Joined May 2020
Jersy19Feb 17, 2025 4:42 PM
225 Comments
Quote from AkujunkanX View quoted comment :
Uh... Okay? I'm not comparing or asking how they are different. The comment was based entirely on the pricing these days being so much cheaper for a comparable product previously.
Oh my bad. Thought you were wondering the difference.
Feb 17, 2025 4:46 PM
1 Comments
Joined Feb 2016
mattsedsFeb 17, 2025 4:46 PM
1 Comments

Our community has rated this post as helpful. If you agree, why not thank

One note on the regular Centauri ($199) is that it doesn't actually look enclosed. The picture is quite misleading but when you compare features it says "Shell: Open Frame" where the Carbon says "Enclosed". They ought to have a picture of the open frame product for honesty there. Carbon is still a great deal at $300 though.
2
Feb 17, 2025 4:47 PM
611 Comments
Joined May 2010
HotandfreeFeb 17, 2025 4:47 PM
611 Comments
Wow. Expect price drop from Bamboo and Creality soon.
2
Feb 17, 2025 4:51 PM
5.9K Comments
Joined Mar 2004
supernomanFeb 17, 2025 4:51 PM
5.9K Comments

Our community has rated this post as helpful. If you agree, why not thank

Quote from jason879 View quoted comment :
found another code MK10OFF taking $10 off as well.
The $15 seems like not working for this item.
Demand15f discount code isn't valid for the items in your cart
I think you need 300 minimum
2

Sign up for a Slickdeals account to remove this ad.

Feb 17, 2025 5:02 PM
102 Comments
Joined Nov 2004
jason879Feb 17, 2025 5:02 PM
102 Comments
Quote from supernoman View quoted comment :
I think you need 300 minimum
ah, added one filler item then it worked! thanks

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

Related Searches

ComputersPrinters3D Printers