GMKtec-US via Amazon has
GMKtec NucBox G3 Plus Mini PC on sale for $179.99 - $50 when you 'clip' the coupon on the product page =
$129.99.
Shipping is free.
Thanks to Deal Hunter
ItsSoCheap for sharing this deal.
- Note: You must be logged in to clip coupons; coupons are typically for one-time use.
Specs:
- Intel Twin Lake N150 4-cores, 4-threads (3.6GHz) Processor
- 8GB DDR4 3200 MHz Memory (32GB max)
- 256GB PCIe 3.0 M.2 2280 NVMe Solid State Drive
- 2TB max M.2 2242 SATA (Not Included)
- Intel UHD 1000MHz Graphics
- Wi-Fi 6 802.11ax +Bluetooth 5.2
- Windows 11 Pro
- Ports:
- 4x USB 3.2 up to 5Gbps
- 2x HDMI 2.0 (4K@60Hz)
- 1x 3.5mm Audio Jack
Warranty: 1-Year Limited
Leave a Comment
Top Comments
Chipset INF Utility
Intel® Serial IO Driver for Windows® 10
Intel® HID Event Filter driver for Windows® 10 for Intel® NUC P14E Laptop Element
I strongly recommend researching these companies before making a purchase, as many seem to be small resellers with limited support infrastructure.
56 Comments
Sign up for a Slickdeals account to remove this ad.
Debian 12 Linux seems to just work, though none of the interfaces came up in the installer.
Definitely recommending to my parents to replace their old, stationary laptops, with one of these.
I strongly recommend researching these companies before making a purchase, as many seem to be small resellers with limited support infrastructure.
Sign up for a Slickdeals account to remove this ad.
I tend to do a fresh install of the OS when I get a mini PC from an off brand (i.e.. not Asus, Intel NUC, Zotac, etc.). Windows Update will usually provide most, if not all, of the needed drivers. Many drivers will install automatically, others you will have to click "View optional drivers" to install manually. The only gotcha with doing a fresh OS load is that often the Windows license is not built into the BIOS and you will have to contact the vendor to get it. Good luck.
The USB ports did not supply enough power for bus-powered SATA SSD drives. When cloning an old SSD to the internal drive using bootable Macrium Reflect, the process would eventually stop with a read error. I tried different adapters until I found something that finally worked - a SATA adapter that is powered from a power brick. To be specific, I used the adapter from an external WD 3.5" drive enclosure I previously shucked.
Sign up for a Slickdeals account to remove this ad.
I use my Flint 2 Router, but there are cheaper ones for just using Wireguard.
Leave a Comment