Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
Missed This Deal? Get alerts when similar deals are posted.
expired
the-press-box 19.6K Views
Mar 13, 2025 11:00 PM

EcoFlow Delta Pro Ultra 6144Wh LFP Home Backup Power Station

$3,879

$4,849

20% off
+ Free Shippingat Wellbots
Visit Wellbots

Why are you downvoting this deal?

Good Deal?
18Comments
Save
Share
Deal Details
Wellbots has EcoFlow Delta Pro Ultra 6144Wh LFP Home Backup Power Station (EFDPUPCS-BP) on sale for $4849 - $970 discount code POWER970 at checkout = $3879. Shipping is free.

Thanks to Staff Member the-press-box for sharing this deal.

About this Item:
  • Scalable capacity up to a colossal 90 kWh, sufficient for 1-month home backup, 1-unit of 7200-Watt output runs your entire home, supports a plug-and-play home solar system of 5.6 kW to 16.8 kW solar input, designed for personal customization
  • EcoFlow x-cooling cooling structure for superior heat dissipation performance, designed for prolonged lifespan boost performance with BMS reliable performance in the most challenging situations
  • 120-Volt/240-Volt hybrid inverter, it has both high-voltage and low-voltage MPPT ports through the advanced structural design, the photovoltaic conversion efficiency of the high-PV input port is increased to 95% while the low-PV input port sports 89%, allowing homeowners to store and utilize more solar energy
  • Delta pro ultra employs x-tech, guaranteeing a total 7200-Watt output even during charging, delta pro ultra inverter's high-voltage PV input port sports an inverter efficiency of 95% and 450-Volt
  • 4-ways of different power generation: grid, solar, EV charger, generator, 1-way of multi-charge: multi-charge (grid plus solar)
  • Kits are sent in 2-boxes and may not arrive at the same time
  • Includes:
    • EcoFlow DELTA Pro Ultra Inverter
    • 1x EcoFlow DELTA Pro Ultra Battery
    • EcoFlow DELTA Pro Ultra Trolley

Editor's Notes

Written by citan359 | Staff

Original Post

Written by the-press-box
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Wellbots has EcoFlow Delta Pro Ultra 6144Wh LFP Home Backup Power Station (EFDPUPCS-BP) on sale for $4849 - $970 discount code POWER970 at checkout = $3879. Shipping is free.

Thanks to Staff Member the-press-box for sharing this deal.

About this Item:
  • Scalable capacity up to a colossal 90 kWh, sufficient for 1-month home backup, 1-unit of 7200-Watt output runs your entire home, supports a plug-and-play home solar system of 5.6 kW to 16.8 kW solar input, designed for personal customization
  • EcoFlow x-cooling cooling structure for superior heat dissipation performance, designed for prolonged lifespan boost performance with BMS reliable performance in the most challenging situations
  • 120-Volt/240-Volt hybrid inverter, it has both high-voltage and low-voltage MPPT ports through the advanced structural design, the photovoltaic conversion efficiency of the high-PV input port is increased to 95% while the low-PV input port sports 89%, allowing homeowners to store and utilize more solar energy
  • Delta pro ultra employs x-tech, guaranteeing a total 7200-Watt output even during charging, delta pro ultra inverter's high-voltage PV input port sports an inverter efficiency of 95% and 450-Volt
  • 4-ways of different power generation: grid, solar, EV charger, generator, 1-way of multi-charge: multi-charge (grid plus solar)
  • Kits are sent in 2-boxes and may not arrive at the same time
  • Includes:
    • EcoFlow DELTA Pro Ultra Inverter
    • 1x EcoFlow DELTA Pro Ultra Battery
    • EcoFlow DELTA Pro Ultra Trolley

Editor's Notes

Written by citan359 | Staff

Original Post

Written by the-press-box

Community Voting

Deal Score
+26
Good Deal
Bad Deal

Why are you downvoting this deal?

Top Comments

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

18 Comments

Sign up for a Slickdeals account to remove this ad.

Mar 14, 2025 8:30 PM
203 Comments
Joined Oct 2018
FairSnail337Mar 14, 2025 8:30 PM
203 Comments

Our community has rated this post as helpful. If you agree, why not thank

This is a good price. But you will need 1 or 2 more 6 kWh batteries.
The main problem is if you go solar with these and you want roof mounted panels, then it is unclear if you can pass NEC codes like the direct current from the panels being in a conduit with no exposed cables and a rapid disconnect switch for fire fighter protection.
3
2
Mar 14, 2025 11:48 PM
2.9K Comments
Joined Jun 2009
g725sMar 14, 2025 11:48 PM
2.9K Comments
Is this the lowest so far for new? (not counting the Home Depot mistake)
Last edited by g725s March 14, 2025 at 04:59 PM.
Mar 15, 2025 2:13 AM
280 Comments
Joined Sep 2013
ashman4827Mar 15, 2025 2:13 AM
280 Comments
Quote from g725s View quoted comment :
Is this the lowest so far for new? (not counting the Home Depot mistake)
Are you sure it was a mistake? Wished I would have bought more....
Mar 15, 2025 3:54 AM
1.6K Comments
Joined Jan 2009
DocuMakerMar 15, 2025 3:54 AM
1.6K Comments
Quote from g725s View quoted comment :
Is this the lowest so far for new? (not counting the Home Depot mistake)
i think so, especially for me, considering no sales tax. i think the previous low (outside of home depot deal, which only lasted an hour), was $3999. this $3789 is still a bit too high for me, because i don't really need this, but it is encouraging that the price dropped below 4000 for the first time, by $120.

i don't really need one of these, but i do want one. if another home depot priced deal came along, i would buy without hesitation for a price like that.
Mar 15, 2025 10:08 AM
46 Comments
Joined Aug 2018
HarryE3231Mar 15, 2025 10:08 AM
46 Comments
Quote from FairSnail337 View quoted comment :
This is a good price. But you will need 1 or 2 more 6 kWh batteries.The main problem is if you go solar with these and you want roof mounted panels, then it is unclear if you can pass NEC codes like the direct current from the panels being in a conduit with no exposed cables and a rapid disconnect switch for fire fighter protection.
No problem passing NEC code. APsmart RDS-S-PLC on every solar panel, APSmart transmitter outdoor kit, and everything THHN/PV wire 10awg in metal conduit. Passes NEC code.
Mar 15, 2025 3:36 PM
7 Comments
Joined Jun 2015
MicroMacroMar 15, 2025 3:36 PM
7 Comments
Quote from FairSnail337 View quoted comment :
This is a good price. But you will need 1 or 2 more 6 kWh batteries. The main problem is if you go solar with these and you want roof mounted panels, then it is unclear if you can pass NEC codes like the direct current from the panels being in a conduit with no exposed cables and a rapid disconnect switch for fire fighter protection.
Like HarryE3231, I also passed inspection. Full NEC compliance. You are right about needing 1-2 more batteries.


It's been pretty great since the cost of installing my fourteen 360W panels + this generator + 2 batteries was roughly the estimate we were given for a Generac to be installed. Sure the Generac can keep you going indefinitely regardless of weather, but it's a hefty upfront cost + continued maintenance + the cost of natural gas. This is a single large upfront cost, and then continues to save me money over the years.
Mar 15, 2025 5:00 PM
1 Comments
Joined Nov 2018
HonestHerring2686Mar 15, 2025 5:00 PM
1 Comments
Quote from MicroMacro View quoted comment :
Like HarryE3231, I also passed inspection. Full NEC compliance. You are right about needing 1-2 more batteries.


It's been pretty great since the cost of installing my fourteen 360W panels + this generator + 2 batteries was roughly the estimate we were given for a Generac to be installed. Sure the Generac can keep you going indefinitely regardless of weather, but it's a hefty upfront cost + continued maintenance + the cost of natural gas. This is a single large upfront cost, and then continues to save me money over the years.
What was your total install cost?

Sign up for a Slickdeals account to remove this ad.

Mar 15, 2025 10:12 PM
203 Comments
Joined Oct 2018
FairSnail337Mar 15, 2025 10:12 PM
203 Comments
Quote from MicroMacro View quoted comment :
Like HarryE3231, I also passed inspection. Full NEC compliance. You are right about needing 1-2 more batteries.


It's been pretty great since the cost of installing my fourteen 360W panels + this generator + 2 batteries was roughly the estimate we were given for a Generac to be installed. Sure the Generac can keep you going indefinitely regardless of weather, but it's a hefty upfront cost + continued maintenance + the cost of natural gas. This is a single large upfront cost, and then continues to save me money over the years.
Micro Macro. I would be thrilled if I could pass inspection here in California with the 12 to 14 420- watt panels that I have room for? What did you have to do to pass the regs. Certainly don't want to mess with insurance coverage these days. Could you please tell us some more about your panel configuration.
Mar 16, 2025 2:19 PM
7 Comments
Joined Jun 2015
MicroMacroMar 16, 2025 2:19 PM
7 Comments

Our community has rated this post as helpful. If you agree, why not thank

Quote from HonestHerring2686 View quoted comment :
What was your total install cost?
Ecoflow Delta Ultra Pro $4,883.81
Ecoflow Battery #2 $2,344.68
Ecoflow Battery #3 $2,039.15
Solar Installation $7,190.00
Total: $16457.64 - take away a 30% federal rebate for solar and storage - new total: $11,520.35
I was quoted ~$12k for a Generac install. My house came with a 10 circuit transfer switch from the previous owner (would've only been a few hundred more to install if it hadn't) and I keep all 10 circuits on the Ecoflow March-October virtually full-time. I reduce the load Nov-Feb because of limited sunlight.
2
Mar 16, 2025 2:25 PM
2.8K Comments
Joined Nov 2008
sHockz_atxMar 16, 2025 2:25 PM
2.8K Comments
Do these qualify for the tax rebate? Is there still a tax rebate? How long of a power cable can I run to the ecoflow from the solar panels?
Mar 16, 2025 3:00 PM
7 Comments
Joined Jun 2015
MicroMacroMar 16, 2025 3:00 PM
7 Comments
Quote from FairSnail337 View quoted comment :
Micro Macro. I would be thrilled if I could pass inspection here in California with the 12 to 14 420- watt panels that I have room for? What did you have to do to pass the regs. Certainly don't want to mess with insurance coverage these days. Could you please tell us some more about your panel configuration.
OK so for starters, I relied on the solar installer I found to make sure I was in compliance. That was basically why I hired them - and it wasn't easy to find someone willing to undertake this task. Most solar companies want to do a routine install to hook you up with their inverters to the grid. Their financing department is usually bigger than their technical staff. The guys I found (RPS Solar in Monmouth County, NJ) were basically solar-specialized electricians. They told me "here are the panels we are currently installing, you figure out the configuration you want and we'll take care of the logistics". I can't tell you EXACTLY what they did to ensure compliance, but I can tell you that per your concern that they installed a disconnect switch on the cables coming from the roof. However, the EcoFlow unit has a disconnect switch itself too. FWIW I'm in NJ which seems to have the same module-level shutdown requirements as CA? (https://www.nfpa.org/education-an...ement-maps)

The panels were 360W variant of these (https://www.solarflexion.com/v/vs..._Sheet.pdf). I put 8 of them in series on the high-PV input port, and 3x3 (3 in series, in parallel with another 3 in series) on the low-PV input port. Getting the specs on the panels you'd be using is important to not exceed max voltage (450V on high-PV, 150V on low-PV). Check the panel's open circuit voltage (Voc) and use the temperature coefficient to figure out what the highest voltage is you could possibly get in your location - something like https://energyresearch.ucf.edu/so...rence-map/ and check the "extreme min" temperature.

Maybe you'd find a solar installer comfortable with doing that configuration for you, but mine wanted me to undertake that part since I was using my inverter instead of theirs. This is certainly not a commonplace installation yet - it was the first install of its type in my township and took 3 months to get approval for the permits!
Mar 16, 2025 4:55 PM
2.9K Comments
Joined Jun 2009
g725sMar 16, 2025 4:55 PM
2.9K Comments
Quote from DocuMaker View quoted comment :
i think so, especially for me, considering no sales tax. i think the previous low (outside of home depot deal, which only lasted an hour), was $3999. this $3789 is still a bit too high for me, because i don't really need this, but it is encouraging that the price dropped below 4000 for the first time, by $120.

i don't really need one of these, but i do want one. if another home depot priced deal came along, i would buy without hesitation for a price like that.
I would consider one of these as well if the price for a new unit was what I feel is reasonable considering other options on the market, including building yourself. I like this unit over building myself if the price was lower.
Mar 16, 2025 6:01 PM
203 Comments
Joined Oct 2018
FairSnail337Mar 16, 2025 6:01 PM
203 Comments
Quote from MicroMacro View quoted comment :
OK so for starters, I relied on the solar installer I found to make sure I was in compliance. That was basically why I hired them - and it wasn't easy to find someone willing to undertake this task. Most solar companies want to do a routine install to hook you up with their inverters to the grid. Their financing department is usually bigger than their technical staff. The guys I found (RPS Solar in Monmouth County, NJ) were basically solar-specialized electricians. They told me "here are the panels we are currently installing, you figure out the configuration you want and we'll take care of the logistics". I can't tell you EXACTLY what they did to ensure compliance, but I can tell you that per your concern that they installed a disconnect switch on the cables coming from the roof. However, the EcoFlow unit has a disconnect switch itself too. FWIW I'm in NJ which seems to have the same module-level shutdown requirements as CA? (https://www.nfpa.org/education-an...ement-maps)

The panels were 360W variant of these (https://www.solarflexion.com/v/vs..._Sheet.pdf). I put 8 of them in series on the high-PV input port, and 3x3 (3 in series, in parallel with another 3 in series) on the low-PV input port. Getting the specs on the panels you'd be using is important to not exceed max voltage (450V on high-PV, 150V on low-PV). Check the panel's open circuit voltage (Voc) and use the temperature coefficient to figure out what the highest voltage is you could possibly get in your location - something like https://energyresearch.ucf.edu/so...rence-map/ and check the "extreme min" temperature.

Maybe you'd find a solar installer comfortable with doing that configuration for you, but mine wanted me to undertake that part since I was using my inverter instead of theirs. This is certainly not a commonplace installation yet - it was the first install of its type in my township and took 3 months to get approval for the permits!
I may have a solar electrician who was recommended by my roofer who said he will do what you want. I'll let you know what he thinks. Thanks
Mar 16, 2025 7:40 PM
311 Comments
Joined Jun 2005
amartins02Mar 16, 2025 7:40 PM
311 Comments
Quote from sHockz_atx View quoted comment :
Do these qualify for the tax rebate? Is there still a tax rebate? How long of a power cable can I run to the ecoflow from the solar panels?
Yes. 30% tax credit if nothing changes this year.

There are calculators online for determining lengths and voltage drops.

Sign up for a Slickdeals account to remove this ad.

Mar 16, 2025 11:08 PM
482 Comments
Joined Nov 2017
lass.richardMar 16, 2025 11:08 PM
482 Comments
Quote from amartins02 View quoted comment :
Yes. 30% tax credit if nothing changes this year.

There are calculators online for determining lengths and voltage drops.
Wow, that's a VERY big "If"…

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!