Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
frontpage Posted by ItsSoCheap | Staff • 5d ago
frontpage Posted by ItsSoCheap | Staff • 5d ago

100-Pack 11.8" Self-Locking Metal Zip Ties (304 Stainless Steel)

$8.00

$9.99

19% off
Amazon
65 Comments 72,445 Views
Get Deal at Amazon
Good Deal
Save
Share
Deal Details
Update: This popular deal is still available.

MAIDUNSI via Amazon has 100-Pack 11.8" Self-Locking Metal Zip Ties (304 Stainless Steel) on sale for $7.99. Shipping is free with Prime or on $35+ orders.

Thanks to Deal Hunter ItsSoCheap for sharing this deal.

Product Details:
  • Metal Heavy duty 304 Stainless steel Zip Ties high temperature resistance, cold resistance, rust and corrosion resistance.
  • Stainless steel Cable Ties is anti-oxidation, anti-ultraviolet & easy to operate.
  • Max supporting weight is 198-lbs.
  • Operation Temperature -170℉~+1000℉.
  • Max bundle diameter is 90mm 3.5inch.
  • Self-locking design Metal zip ties only need to be tightened with sharp-nosed pliers and the excess can be cut off with diagonal pliers or tin scissors.
  • 11.8" x 0.18" x 0.01" (L*W*T) 100 PCS.

Editor's Notes

Written by RevOne | Staff
  • 4.7 out of 5 stars rating on Amazon based on 1,445+ customer reviews.
  • Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
  • Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
  • If you're not a student, there's also a free 1-Month Amazon Prime trial available.

Original Post

Product Info
Community Notes
About the Poster
Deal Details
Product Info
Community Notes
About the Poster
Update: This popular deal is still available.

MAIDUNSI via Amazon has 100-Pack 11.8" Self-Locking Metal Zip Ties (304 Stainless Steel) on sale for $7.99. Shipping is free with Prime or on $35+ orders.

Thanks to Deal Hunter ItsSoCheap for sharing this deal.

Product Details:
  • Metal Heavy duty 304 Stainless steel Zip Ties high temperature resistance, cold resistance, rust and corrosion resistance.
  • Stainless steel Cable Ties is anti-oxidation, anti-ultraviolet & easy to operate.
  • Max supporting weight is 198-lbs.
  • Operation Temperature -170℉~+1000℉.
  • Max bundle diameter is 90mm 3.5inch.
  • Self-locking design Metal zip ties only need to be tightened with sharp-nosed pliers and the excess can be cut off with diagonal pliers or tin scissors.
  • 11.8" x 0.18" x 0.01" (L*W*T) 100 PCS.

Editor's Notes

Written by RevOne | Staff
  • 4.7 out of 5 stars rating on Amazon based on 1,445+ customer reviews.
  • Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
  • Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
  • If you're not a student, there's also a free 1-Month Amazon Prime trial available.

Original Post

Community Voting

Deal Score
+162
Good Deal
Get Deal at Amazon
Leave a Comment
To participate in the comments, please log in.

Top Comments

There is a small metal ball in the locking head. If you take the tail end from another SS tie, you can loosen that ball you can then slide it open.
A Harbor Freight stainless steel zip tie has been holding a heat shield onto my exhaust (to prevent it from rattling) for years. Not sure how many years, but probably over 5. Rattle hasn't come back and never had to replace the zip tie. Only ever used a few, but they are nice to have on hand for high heat stuff. Hadn't considered the UV aspect, but have some applications for them now that it has been pointed out. Thanks!
Price wise, these compare well against Harbor Freight which is usually my comparison go-to where they have 25 for $5.
https://www.harborfreight.com/12-...60330.html

I use ss zips to hold down some outdoor tarps to ground screws, and they work great. Much better than plastic, both for hold-strength and not getting brittle after being outside for a while.

Bottom line, good price and I'm probably going to pick up some more for for the stash.

65 Comments

Sign up for a Slickdeals account to remove this ad.

5d ago
11,493 Posts
Joined Sep 2007
5d ago
RugerRedhawk
5d ago
11,493 Posts

Our community has rated this post as helpful. If you agree, why not thank RugerRedhawk

Maybe useful for temporary exhaust hanger scenarios, and other high heat applications, but I wonder if the locking mechanism is actually strong enough to result in a stronger hold than a properly sized plastic zip tie. I suppose UV wouldn't break down these over time either if that's a concern, but you also have to factor in how much you trust this rando chinese off brand at being actually stainless and not rusting out in one season.
edit: to be clear not crapping on this, just debating the value. In the end based on comments here I did order some to have on hand and try out, should come in handy for "temp" exhaust fixes if nothing else.
3
3
5d ago
370 Posts
Joined May 2012
5d ago
BaconSnake
5d ago
370 Posts

Our community has rated this post as helpful. If you agree, why not thank BaconSnake

Price wise, these compare well against Harbor Freight which is usually my comparison go-to where they have 25 for $5.
https://www.harborfreight.com/12-...60330.html

I use ss zips to hold down some outdoor tarps to ground screws, and they work great. Much better than plastic, both for hold-strength and not getting brittle after being outside for a while.

Bottom line, good price and I'm probably going to pick up some more for for the stash.
5
1
Pro
5d ago
2,022 Posts
Joined Dec 2012
5d ago
snafufubarpita
Pro
5d ago
2,022 Posts
Quote from BaconSnake :
Price wise, these compare well against Harbor Freight which is usually my comparison go-to where they have 25 for $5.
https://www.harborfreight.com/12-...60330.html

I use ss zips to hold down some outdoor tarps to ground screws, and they work great. Much better than plastic, both for hold-strength and not getting brittle after being outside for a while.

Bottom line, good price and I'm probably going to pick up some more for for the stash.

Yes great price. The harbor freight ones work well, if needed. Very tough to undo, even with the trick. Better have a good set of snips available to remove these, because they are much tougher than plastic zip ties.. you'll need to sharpen the snips afterward. ✌️😀
2
5d ago
279 Posts
Joined Dec 2007
5d ago
BadMouth
5d ago
279 Posts

Our community has rated this post as helpful. If you agree, why not thank BadMouth

A Harbor Freight stainless steel zip tie has been holding a heat shield onto my exhaust (to prevent it from rattling) for years. Not sure how many years, but probably over 5. Rattle hasn't come back and never had to replace the zip tie. Only ever used a few, but they are nice to have on hand for high heat stuff. Hadn't considered the UV aspect, but have some applications for them now that it has been pointed out. Thanks!
6
5d ago
694 Posts
Joined Nov 2010
5d ago
taze13
5d ago
694 Posts
My name is Joe Goldberg and I really like this product
4
5d ago
10,310 Posts
Joined Jul 2003
5d ago
burticus
5d ago
10,310 Posts
I had no idea metal zip-ties were a thing. Interesting. Might bite just to check it out.
5d ago
1,910 Posts
Joined Aug 2010
5d ago
BruceInCola
5d ago
1,910 Posts
I wonder if these would hold up underwater in a salt water swimming pool? 🤔

Sign up for a Slickdeals account to remove this ad.

5d ago
7,404 Posts
Joined Nov 2006
5d ago
KMan
5d ago
7,404 Posts

Our community has rated this post as helpful. If you agree, why not thank KMan

Quote from RugerRedhawk :
Maybe useful for temporary exhaust hanger scenarios, and other high heat applications, but I wonder if the locking mechanism is actually strong enough to result in a stronger hold than a properly sized plastic zip tie. I suppose UV wouldn't break down these over time either if that's a concern, but you also have to factor in how much you trust this rando chinese off brand at being actually stainless and not rusting out in one season.
I've used these to support an exhaust pipe on an old car for several years now, without a problem. I Used several as insurance in case one breaks, but one is certainly strong enough by itself. They're sometimes less effective at securing heat shields because they don't tighten quite enough to prevent rattling, and for that you often need an exhaust clamp, but even then they'll work in a pinch. It's a good idea to carry several in each car in case a hanger, heat shield or hose clamp snaps, to at least get you home. Plastic zip ties are fine for securing underbody and wheel well plastic shields and covers since heat usually isn't an issue there. Carry some of both.
4
5d ago
25 Posts
Joined Aug 2020

This comment has been rated as unhelpful by Slickdeals users.

5d ago
1 Posts
Joined May 2024
5d ago
RelaxedShoe3192
5d ago
1 Posts

Our community has rated this post as helpful. If you agree, why not thank RelaxedShoe3192

Quote from Itsbunnytime :
Just put a magnet to it, if it sticks, it's not stainless steel.
A popular misconception! Depends on the formula - some is and some isn't. A google search will find more of the science than I want to type here.
4
5d ago
71 Posts
Joined Sep 2012
5d ago
Sosuke
5d ago
71 Posts

Our community has rated this post as helpful. If you agree, why not thank Sosuke

Quote from Itsbunnytime :
Just put a magnet to it, if it sticks, it's not stainless steel.
I used to think this, too, but found that's not always the case. Most common stainless steels (304 and 316) are not magnetic in their standard form because of their austenitic structure, but they can become magnetic if their microstructure changes due to mechanical processing. 316 is generally less magnetic and more corrosion-resistant than 304.

Source: https://finemetalworking.com/is-s...l-magnetic
4
5d ago
1,104 Posts
Joined Nov 2006
5d ago
E_braker
5d ago
1,104 Posts
not a good price, i buy lots of these on amazon and only consider them at .05 each.
3
5d ago
2,932 Posts
Joined Nov 2006
5d ago
gl21133
5d ago
2,932 Posts

Our community has rated this post as helpful. If you agree, why not thank gl21133

400 series stainless is ferritic. That's why magnets stick to newer stainless fridges.
2
Pro
5d ago
1,901 Posts
Joined Oct 2006
5d ago
savethelinoleum
Pro
5d ago
1,901 Posts
in true SD fashion, I didn't know these existed and now I need to find a use for them
8

Sign up for a Slickdeals account to remove this ad.

5d ago
273 Posts
Joined Mar 2013
5d ago
dealsnewbie2
5d ago
273 Posts
How to remove these? You have to cut or reusable?

Popular Deals

View All

Trending Deals

View All