$33.69 - 20% Off Code (JULYFINDS) w/ Free s/h = $26.95 + tax
Upgraded 360° Effective Heating: The Creality Filament Dry Box 2.0 boasts a hot-air circulation system with a fan, ensuring rapid and consistent heating of your filaments. Achieve even drying for optimal performance, reaching 65°C within just 15 minutes
Enhance Your Prints: Say goodbye to print issues like drawing, clogging, and poor adhesion, and improve your print quality. Filament storage box Suitable for various filament types (PLA, ABS, ASA, PETG, TPU, PP, PC, PA, etc.) and diameters (1.75mm/2.85mm), diverse usage
Fully Customizable Drying Time & Temperature: Set the drying time & temperature as per your needs. 3D filament dryer Set adjustable timer controls from 0-24 hours and temperatures between 45℃-65℃ to ensure perfect drying every time
https://www.ebay.com/itm/375306380929
Leave a Comment
3 Comments
Sign up for a Slickdeals account to remove this ad.
Can anyone comment on the effectiveness of drying by heat vs. vacuum (with humidity control packs) ?
There are many factors that can also come into account. Live in a moist area, like near an ocean or a tropical climate, then you would always have problems with humidity. Live in a desert, not so much.
There is also the issue of what filament type one is using. They are all hygroscopic to some level, here is a basic rundown:
PLA, Nylon, PVA, TPU, ABS, PC, PETG - all essentially sponges. PLA and TPU might be the worse of the bunch. PLA will become brittle and start to break down if it absorbs too much moisture.
ASA, PA, HIPS - less prone to it, but will still absorb some (depending on environment).
If you aren't in an environment that has relatively high humidity, and aren't storing spools for extended periods of time, this dryer might be a bit overkill. If you are having issues with prints that are attributable to high moisture in the filament (popping, poor adhesion as an example), it would be worth the investment.
Leave a Comment