frontpageEragorn | Staff posted Jul 24, 2025 04:09 AM
Item 1 of 5
Item 1 of 5
frontpageEragorn | Staff posted Jul 24, 2025 04:09 AM
VEVOR 4V Cordless Screwdriver w/ 12-Piece Accessory Kit & Twistable Handle
$14
$19
26% offAmazon
Get Deal at AmazonGood Deal
Bad Deal
Save
Share
Leave a Comment
Top Comments
For example: if you're installing a machine screw into a threaded hole, you set the clutch to something very low and when the screw bottoms out, the clutch will slip vs stripping it out or having the drill tweak your wrist. Alternatively, if you're driving screws into wood, you can set the clutch to do the same thing and have the head of the screw sit flush with the surface vs having it drive down into your piece.
Most drills also have a position with a picture of a drill bit, and this is essentially "clutch off" mode. It's a nice feature that a lot of these drivers seem to omit despite being on every cheap cordless drill for decades.
18 Comments
Sign up for a Slickdeals account to remove this ad.
https://i.imgur.com/yonZ11P.png
don't let the review images fool you (or rating summary), this variant is mingled with a 20v drill ... image:
https://m.media-amazon.com/images...L1600_
Our community has rated this post as helpful. If you agree, why not thank metlfan2003
For example: if you're installing a machine screw into a threaded hole, you set the clutch to something very low and when the screw bottoms out, the clutch will slip vs stripping it out or having the drill tweak your wrist. Alternatively, if you're driving screws into wood, you can set the clutch to do the same thing and have the head of the screw sit flush with the surface vs having it drive down into your piece.
Most drills also have a position with a picture of a drill bit, and this is essentially "clutch off" mode. It's a nice feature that a lot of these drivers seem to omit despite being on every cheap cordless drill for decades.
don't let the review images fool you (or rating summary), this variant is mingled with a 20v drill ... image:
https://m.media-amazon.com/images...L1600_
is that info from one you actually received?
I ask, because "rufus" says: " uses a USB-A to mini-USB cable for charging.".
But I agree, usb-c is best.
don't let the review images fool you (or rating summary), this variant is mingled with a 20v drill ... image:
https://m.media-amazon.com/images...L1600_.jpg [media-amazon.com]
Sign up for a Slickdeals account to remove this ad.
mini-usb - or micro-usb - would be even worse.
But a Temu screwdriver doesn't have enough speed or power to worry about that. It's max torque is 6 nm. which is like finger tight.
Sign up for a Slickdeals account to remove this ad.
https://a.co/d/ePpY6Qf
Leave a Comment