Anycubic via Aliexpress has
Anycubic Kobra S1 Combo AE Version Multi-Color 3D Printer for $562 - $100 when you apply promo codes
RDC100B =
$462.
Shipping is free.
Thanks Community Member
gabe23111 for sharing this deal
Note, Price may fluctuate slightly with currency exchange rates. You must be signed into your AliExpress account and have your
address added to add items to your cart and place an order. You may have to manually type in the promo code to apply it at checkout. This item ships from a USA warehouse.
Alternative promo codes available if listed code above is unavailable: AEUS100, USDEAL100, USKUN100
Features:
- Multi-Color Printing: Anycubic ACE PRO supports 4-color printing; pairing two units allows up to 8-color printing, reducing the need for post-print painting.
- Built-In Drying: Integrated filament drying system works continuously, even during printing, for improved efficiency.
- High-Speed Performance: Anycubic Kobra S1 Combo achieves up to 600mm/s print speed with 20,000 mm/s² acceleration—12× faster than standard FDM printers—while maintaining accuracy and detail.
- Flow Correction: Kobra OS automatically adjusts filament extrusion to ensure smoother surfaces, minimize corner overflow, and reduce material waste.
- Remote Control: Anycubic App enables one-click printing from anywhere, supporting multi-plate document parsing for complex projects.
Leave a Comment
Top Comments
I own 2x S1C with 8 color on each. I bought these 2 after much success with Kobra 3 combos. Boy, was I wrong. I SPENT LITERALLY over 100 hours tinkering with this unit, mainly the auto leveling issues that you had. I literally took the entireunit apart including every screw, motherboard, print circuit board, axis, etc. Replaced almost every part of the printer and still had a bad 1st layer.
After some time, I realized it was not the hardware issue but it was a simple flaw in the nozzle wiper. When the nozzle extrudes and goes over the wiper, it does not clean it completely and begins the auto leveling with a bit of filament at the tip. This throws off the leveling and ends upt with a poor 1st layer. This is due to the ptfe style wiper that is used in S1.
As soon as I replaced the wiper with kobra3/A1 style wiper with a filament poop chute plastic, the problem was immediately resolved. Printed almost 500hours+ without any 1st layer issues.
You can thank me now.
22 Comments
Sign up for a Slickdeals account to remove this ad.
(I mean I really want the Snapmaker U1 to be the new standard everyone fights for -- but we gotta start somewhere).
(I mean I really want the Snapmaker U1 to be the new standard everyone fights for -- but we gotta start somewhere).
Sign up for a Slickdeals account to remove this ad.
Same, wondering if it is worth returning for this instead.
Our community has rated this post as helpful. If you agree, why not thank pun
I own 2x S1C with 8 color on each. I bought these 2 after much success with Kobra 3 combos. Boy, was I wrong. I SPENT LITERALLY over 100 hours tinkering with this unit, mainly the auto leveling issues that you had. I literally took the entireunit apart including every screw, motherboard, print circuit board, axis, etc. Replaced almost every part of the printer and still had a bad 1st layer.
After some time, I realized it was not the hardware issue but it was a simple flaw in the nozzle wiper. When the nozzle extrudes and goes over the wiper, it does not clean it completely and begins the auto leveling with a bit of filament at the tip. This throws off the leveling and ends upt with a poor 1st layer. This is due to the ptfe style wiper that is used in S1.
As soon as I replaced the wiper with kobra3/A1 style wiper with a filament poop chute plastic, the problem was immediately resolved. Printed almost 500hours+ without any 1st layer issues.
You can thank me now.
I own 2x S1C with 8 color on each. I bought these 2 after much success with Kobra 3 combos. Boy, was I wrong. I SPENT LITERALLY over 100 hours tinkering with this unit, mainly the auto leveling issues that you had. I literally took the entireunit apart including every screw, motherboard, print circuit board, axis, etc. Replaced almost every part of the printer and still had a bad 1st layer.
After some time, I realized it was not the hardware issue but it was a simple flaw in the nozzle wiper. When the nozzle extrudes and goes over the wiper, it does not clean it completely and begins the auto leveling with a bit of filament at the tip. This throws off the leveling and ends upt with a poor 1st layer. This is due to the ptfe style wiper that is used in S1.
As soon as I replaced the wiper with kobra3/A1 style wiper with a filament poop chute plastic, the problem was immediately resolved. Printed almost 500hours+ without any 1st layer issues.
You can thank me now.
Sign up for a Slickdeals account to remove this ad.
Leave a Comment