FLASHFORGE 3D Printer Store via AliExpress has
Flashforge Adventurer 5M Pro 3D Printer for $336.99 - $64 when you apply coupon code
USKUN64 at checkout =
$272.99.
Shipping is free.
Thanks to Community Member
gabe23111 for posting this deal.
Note: Price may fluctuate slightly with currency exchange rates. You must be signed into your AliExpress account and have your address added to add items to your cart and place an order. To add your address, go to Settings via the drop-down menu at the top of the page, then select Shipping Address. You may have to manually type in the promo code to apply it at checkout. This item ships from a USA warehouse.
About this product:- High-speed, high-precision FDM printing up to 300 mm/s and +/- 0.2 mm accuracy.
- 220x220x220 mm with auto-leveling for ease of setup.
- Multiple nozzle sizes (0.25 / 0.4 / 0.6 / 0.8 mm) to suit detail vs speed tradeoffs.
- Wide filament compatibility (1.75 mm) supports PLA, TPU, ABS, PETG, etc. at up to 280 degrees Celcius nozzle temp.
- Fast operating throughput max working speed up to 600 mm/s for efficient prints.
Community Reviews
The Flashforge Adventurer 5M Pro is an enclosed, fast 3D printer that stands out for PLA and other advanced filaments, with a HEPA filter for fumes and chamber airflow that helps raise internal temperature. It is described as reliable, beginner friendly, and strong on print quality, with Orca support and speeds that compare well against similarly priced rivals. The main tradeoff is its 220 x 220 x 220 mm build volume, which is smaller than some alternatives, and it does not have an active chamber heater. It is a solid fit when enclosure and filtration matter more than maximum size or multicolor options.
Common Questions (5)
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
40 Comments
Sign up for a Slickdeals account to remove this ad.
I would also note that as a beginner I would suggest that the FF 5M (non-pro) for $100 less was a really great deal. If you are primarily going to print materials like PLA then the enclosure isn't as important. Also for a bit less the Anycubic Kobra 3 + multi-material unit is a bit cheaper. Again, being an open printer it's not as good for advanced materials but the multi-color might be a nicer feature for your needs.
https://www.makeronline
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
This is a plus so long as you are OK with so much of your data going through their servers. Consider if I send you a model to print. I got good results because I have good material profiles for my printer and I selected the right temperatures, flow rates, support locations, # of wall layers etc. However, if you don't have all those settings dialed in you might have a print failure because, without knowing, you asked the printer to do something it just couldn't do reliably. It's not a failure of the hardware, just that the slicer didn't realize it needed some special settings. If we are both in the BL eco system, when I figure this stuff out and upload my print to Makerwold, you get to take advantage of all those settings.
When you download a file from say Thingivers you just get an STL file (a generic 3D print file). It contains the shape but doesn't tell the slicer/printer anything about how to actually slice up the print for printing.
If/once you learn a bit about how to setup prints, you often can figure these things out on your own. However, as a novice, you are more likely to have successful prints if you are using print settings similar to someone else's successful print. This is why most printers come with some pre-sliced files.
Anyway, a lot of what I described is why BL "just works". They use the software and ecosystem to help pick a successful path for you. However, this does come with some negatives. It's not as helpful if the files you are printing either don't come from Makerworld (ie one of the many other sites where you are just going to get STL files that you have to slice yourself). It also doesn't help if you are making your own files.
There is also the issue of what information is BL sharing with their servers in China. I know my company flat refused to allow their earlier software on our network for security reasons. You can use the system fully offline but if you do then you lose access to a lot of the smart systems that increase the chances you get a good print. Certainly you still can get a good print off line but at that point the system becomes similar to any other good quality printer.
Since I use my printer offline I don't benefit from most of the Bambu ecosystem. I also would have to put up with using micro SD cards instead of a USB stick for file transfer. Thus most of the BL advantages over the FF are neutral for me.
Not because build quality or design but simply because it has an upgrade path for color. This AD5 is dead in the water and has been for 2 years now. They make a color version called the AD5X now but it is in no way backward compatible with this one.
The S1 can be found refurb from anycubic ebay store for 279 and brand new it is 319 so it is in the ballpark same price.
Besides the extra build size and ability to upgrade multicolor, I would say the S1 also gets a leg up when it comes to replacement parts. The AD5 uses proprietary nozzles that are quite expensive. Im talking $30 a pop. The Kobra S1 has a 3 pack for $25.
Hope this helps
As far as I am aware, when it comes to readily available consumer printers the only ones with active chamber heating are the Qidi Q1 Pro, Qidi Q2, Qidi X plus 4, Bambu H2D/H2S and finally the Creality K2 Plus.
https://www.makeronline
I just proved you wrong. It doesnt matter if it needs to be printed.
You dont even know the difference between active and passive heating. full of bad advice and misinfo
I feel like Anycubic's quality is more hit or miss but the only first hand experience I have with one of their printers was a used Kobra Go which was very much an older generation of printer. I suspect the differences are small assuming the reviews don't find some sort of glaring issue. Also, do be careful about just watching early reviews. With many of these printers they are released before being fully baked. For example, the early reviews of the FF said it only supported networked printing via the FF slicer, not Orca. Thanks to updates that is no longer true.
Sign up for a Slickdeals account to remove this ad.
I just proved you wrong. It doesnt matter if it needs to be printed.
You dont even know the difference between active and passive heating. full of bad advice and misinfo
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!