Update: This popular deal is available again with a slight price increase.
FLASHFORGE 3D Printer Store via AliExpress has
Flashforge Adventurer 5M Wi-Fi 3D Printer w/ Auto Leveling on sale for $207.20 - $40 off when you apply promo code
RDC40B on the checkout page = $167.20 -> $166.68 ->
now $168.98.
Shipping is free (ships from within the United States).
- Note: Price may fluctuate slightly with currency exchange rates. You must be signed into your AliExpress account and have your address added to add items to your cart and place an order. You may have to manually type in the promo code to apply it at checkout.
Thanks to Community Member
gabe23111 for sharing this deal.
About this Item:
- Onekey full auto-leveling
- 600mm/s max speed
- PEI flexible plate 3S quick-release nozzle
- 99% resume print success w/ reliable print recovery for minimal disruptions
- 4.3" touchscreen simplifies printing operations
- 220 × 220 × 220 mm is sufficient space for most prints
- 1 year warranty
Top Comments
This is still a good deal. I just don't want people to think this is some blazing deal where it's a "buy now, think later". Especially considering it's AliE and a 3D printer.
1. The default PLA bed temp is 50C vs 55-60 on some other printers. That might explain some of the again issues.
2. While I love printing without rafts, brims, sometimes a part design is just inherently not good at sticking. Those things really can help.
3. Masking tape/painters tape is a great build surface for challenging prints. It doesn't leave a nice surface finish but it holds well.
4. Sometimes the problem really is the shape of your part and/or it's orientation with respect to the infill. I had lift issues when printing a long thin, tall part. The part would fail at the same layer each time. When I watched carefully I realized the issue was my infill. Orca put the infill down at 45* to the bed. That meant some of the time the infill was along the length of my part. As it cooled it would put tension on the top layer of the print. It was trying to bend it like too tight guitar strings. Once I understood the issue it was easy to address.
Anyway, my 5M has been rock solid and a great printer. An easy recommend for me.
Community Reviews
The Flashforge Adventurer 5M is a fast, capable budget 3D printer that is especially appealing for tinkering and quick setup. It can produce excellent results, runs much faster than an Ender-3 V3 SE, and supports easy Wi-Fi printing, USB webcam monitoring, and community firmware or slicer options. The main recurring drawback is bed adhesion, with some prints needing manual leveling, Z-offset tuning, glue, or a better plate, and the stock PSU fan is loud. It is a strong value if you are comfortable working through a few quirks.
Common Questions (5)
At around $167, it is a strong value for a capable, fast printer if you are comfortable with some tinkering. The main tradeoffs are occasional print failures, a loud always-on PSU fan, and higher nozzle costs around $35-$40 each.
Bed adhesion can be excellent for PLA with the right setup, but some units need tuning and some prints lift repeatedly. The default PLA bed temp is 50C, so raising it to 55-60C, using glue or painters tape for difficult parts, and setting the Z-offset correctly can help.
Orca-Flashforge for Windows works well and is Cura-like, and Wi-Fi printing is easy. Cura may require creating a custom profile, while Flashforge's slicer and Orca already have profiles available.
It does not include a camera. A USB webcam can be plugged in and recognized, and the phone app can then show remote print viewing.
It can be a great printer if you like to tinker, but it is not the best choice if you want a fully hands-off experience. For more enclosure-focused or more reliable out-of-box use, the Pro or 4-color versions are the better fit.
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
65 Comments
Sign up for a Slickdeals account to remove this ad.
For those of you having bed adhesion problems. You need to manually level the bed and get the z-offset set correctly. Both of these are much easier to do with klipper-mod or forge-x installed. Coarse adjustment for the bed is done with the belt underneath the printer. Fine adjustment is done with the 4 nuts under the bed. Setting the z-offset can be tricky with the stock firmware because it doesn't have fine enough adjustment options.
Our community has rated this post as helpful. If you agree, why not thank
I primarily use my Elegoo CC and P1S because they have bigger beds, enclosed and have been flawless.
My personal opinion based on what I own:
200 dollar budget = adventure 5m
300ish budget = CC - it is enclosed with camera + light. There is some back-and-forth with the community. Elegoo source firmware is closed off and some data miners are finding copied Klipper code.
500ish = P1S - personally, I love the fact that I can pick a model in the phone app and have print on my Bambu devices with just a few clicks. Also, you can't beat the fact that it works right out of the box.
There may be spelling errors as I am typing this from a phone
Our community has rated this post as helpful. If you agree, why not thank
Sign up for a Slickdeals account to remove this ad.
Sorry, the coupon code you entered is based on a first come first served basis and has been used up by other shoppers. Please enter a different coupon code or explore other discounts on AliExpress.
Our community has rated this post as helpful. If you agree, why not thank
Sorry, the coupon code you entered is based on a first come first served basis and has been used up by other shoppers. Please enter a different coupon code or explore other discounts on AliExpress.
That one works for me now.
I own two of these Sound Forge Adventure 5M printers. I picked them up for around $250 each, so at this price it's definitely a solid deal—when they're working right.
That said, I've had my share of issues. A lot of my early failed prints were user error (mostly prints not sticking to the plate), but even after troubleshooting, these machines often sit idle because I get so many failures compared to my Bambu printers. Another downside are the nozzle cost they run about $35–$40 each, which adds up fast.
There's also an optional enclosure kit to make it more like a P1S, but you have to print all the plastic parts yourself (the only included piece is the plexiglass panel and screws), and that kit runs another $40–$50.
For materials, I print exclusively with PETG and silk PLA. The reality is my Adventure 5Ms don't get much use anymore since my Bambu printers handle most of my work these days. Still, if you can manage the quirks and nozzle costs, the price here is good for what you're getting. imagine if you could get 10 or 12 of these for under $2,000 you'd have a farm.
second comment about bed adhesion. was it just a leveling issue or things actually not sticking?
cant add it to my cart ,not deliverable to my address ….i guess wont be ordering one.
Any good deal on resin printers ?
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!