Update: This popular deal is available again with a slight price increase.
FLASHFORGE 3D Printer Store via AliExpress has
Flashforge Adventurer 5M Wi-Fi 3D Printer w/ Auto Leveling on sale for $207.20 - $40 off when you apply promo code
RDC40B on the checkout page = $167.20 -> $166.68 ->
now $168.98.
Shipping is free (ships from within the United States).
- Note: Price may fluctuate slightly with currency exchange rates. You must be signed into your AliExpress account and have your address added to add items to your cart and place an order. You may have to manually type in the promo code to apply it at checkout.
Thanks to Community Member
gabe23111 for sharing this deal.
About this Item:
- Onekey full auto-leveling
- 600mm/s max speed
- PEI flexible plate 3S quick-release nozzle
- 99% resume print success w/ reliable print recovery for minimal disruptions
- 4.3" touchscreen simplifies printing operations
- 220 × 220 × 220 mm is sufficient space for most prints
- 1 year warranty
Top Comments
This is still a good deal. I just don't want people to think this is some blazing deal where it's a "buy now, think later". Especially considering it's AliE and a 3D printer.
1. The default PLA bed temp is 50C vs 55-60 on some other printers. That might explain some of the again issues.
2. While I love printing without rafts, brims, sometimes a part design is just inherently not good at sticking. Those things really can help.
3. Masking tape/painters tape is a great build surface for challenging prints. It doesn't leave a nice surface finish but it holds well.
4. Sometimes the problem really is the shape of your part and/or it's orientation with respect to the infill. I had lift issues when printing a long thin, tall part. The part would fail at the same layer each time. When I watched carefully I realized the issue was my infill. Orca put the infill down at 45* to the bed. That meant some of the time the infill was along the length of my part. As it cooled it would put tension on the top layer of the print. It was trying to bend it like too tight guitar strings. Once I understood the issue it was easy to address.
Anyway, my 5M has been rock solid and a great printer. An easy recommend for me.
Community Reviews
The Flashforge Adventurer 5M is a fast, capable budget 3D printer that is especially appealing for tinkering and quick setup. It can produce excellent results, runs much faster than an Ender-3 V3 SE, and supports easy Wi-Fi printing, USB webcam monitoring, and community firmware or slicer options. The main recurring drawback is bed adhesion, with some prints needing manual leveling, Z-offset tuning, glue, or a better plate, and the stock PSU fan is loud. It is a strong value if you are comfortable working through a few quirks.
Common Questions (5)
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
65 Comments
Sign up for a Slickdeals account to remove this ad.
Stupid question, can I use Cura with this? I have no interest in WIFI, remote printing, etc (just export gcode to SD card, put SD card in printer...super unfancy). Some stuff I am reading online makes it sound like using Cura requires work arounds. I also don't want to learn a new slicer if possible.
Was wondering the same found this :
https://willowcreativ.c
It was written for the pro but he says it should work with the adventurer 5m. If it doesn't work assuming you could just add a custom profile to cura.
Only printed 2 things so far but the Adventurer 5M is 3x+ faster than my Ender-3 V3 SE. And that is just at the factory default. I loaded up the same design in Cura vs Orca-Flashforge and the reported print time was 1 hour 43 minutes compared to 23 minutes. Orca-Flashforge seems to be a much more accurate time real world but that reported 1:43 (per Cura) tends to be slightly exaggerated, real world would have still taken roughly 1 hour 30 minutes to actually print.
*The Android (APK) app doesn't seem to be on the Play Store, the apk (iOS app too) was downloadable via their website.
https://www.flashforge.
Sign up for a Slickdeals account to remove this ad.
As others have said, bed temps are a bit low by default which causes adhesion issues but fixing takes like 30 seconds.
Edit: works again!
But yeah, lovely printer that normally hangs 270-350$. Very upgradable, very capable.
Highly recommend loading the community Forge-X klipper on it, the stock is bleh. Super easy upgrade, and gives you support with most slices and fluidd/mainsail.
Sign up for a Slickdeals account to remove this ad.
it does not include a camera, but you can plug a USB WebCam into it and it will work.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!