Item 1 of 3
Item 1 of 3
expiredSillyWabbit posted Sep 12, 2025 2:36 AM
Bambu Lab X1C 3D Printer Combo Offer: w/ Hub $1119 or w/ Buffer
$1,099
$1,674
34% off
+ $35 S/Hat Bambu Lab
Heads up, this deal has expired. Want to create a deal alert for this item?
+ $35 S/Hat Bambu LabDeal Details
Bambu Lab has their Bambu Lab X1C 3D Printer Combo w/ Hub or Buffer on sale listed below. Shipping is $35 (within 3-10 business days to deliver)
Thanks to community member SillyWabbit for finding this deal
Note, ensure you select option of your choice before adding to cart. Shipping/handling fee may vary by location
Available Option(s)
Thanks to community member SillyWabbit for finding this deal
Note, ensure you select option of your choice before adding to cart. Shipping/handling fee may vary by location
Available Option(s)
- Bambu Lab X1C 3D Printer Combo w/ Buffer
- $1099
- Includes
- Bambu Lab X1C 3D Printer
- AMS 2 Pro
- 4-Pin Bus Cable
- Switching Adapter
- Filament Buffer
- PTFE Tube Coupler
- Includes
- $1099
- Bambu Lab X1C 3D Printer Combo w/ Hub
- $1119
- Includes
- Bambu Lab X1C 3D Printer
- AMS 2 Pro
- 4-Pin Bus Cable
- Switching Adapter
- AMS Hub
- PTFE Tube Coupler
- Includes
- $1119
Editor's Notes
Written by Discombobulated | Staff- Price Research
- The Bambu Store/Lab is now offering their X1C 3D printer combo at a reduced rate $575 Off (combo w/ buffer) and $579 (combo w/ hub)
- About the Deal
- Recommend the buffer combo for users that plan to connect one AMS 2 Pro or the hub combo for users connecting more than one AMS 2 Pro
- The X1C 3D printer and AMS 2 Pro/Accessories will be shipped in separate boxes
- The AMS 2 Pro is now compatible w/ X1C 3D Printer
- Please see original post/WIKI for additional details (if applicable) or check the forum comments for helpful insights/discussion
- Additional Details
- Get 1%-5% cash back on deals like this with a cash back credit card. Compare the available cash back credit cards here.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Bambu Lab has their Bambu Lab X1C 3D Printer Combo w/ Hub or Buffer on sale listed below. Shipping is $35 (within 3-10 business days to deliver)
Thanks to community member SillyWabbit for finding this deal
Note, ensure you select option of your choice before adding to cart. Shipping/handling fee may vary by location
Available Option(s)
Thanks to community member SillyWabbit for finding this deal
Note, ensure you select option of your choice before adding to cart. Shipping/handling fee may vary by location
Available Option(s)
- Bambu Lab X1C 3D Printer Combo w/ Buffer
- $1099
- Includes
- Bambu Lab X1C 3D Printer
- AMS 2 Pro
- 4-Pin Bus Cable
- Switching Adapter
- Filament Buffer
- PTFE Tube Coupler
- Includes
- $1099
- Bambu Lab X1C 3D Printer Combo w/ Hub
- $1119
- Includes
- Bambu Lab X1C 3D Printer
- AMS 2 Pro
- 4-Pin Bus Cable
- Switching Adapter
- AMS Hub
- PTFE Tube Coupler
- Includes
- $1119
Editor's Notes
Written by Discombobulated | Staff- Price Research
- The Bambu Store/Lab is now offering their X1C 3D printer combo at a reduced rate $575 Off (combo w/ buffer) and $579 (combo w/ hub)
- About the Deal
- Recommend the buffer combo for users that plan to connect one AMS 2 Pro or the hub combo for users connecting more than one AMS 2 Pro
- The X1C 3D printer and AMS 2 Pro/Accessories will be shipped in separate boxes
- The AMS 2 Pro is now compatible w/ X1C 3D Printer
- Please see original post/WIKI for additional details (if applicable) or check the forum comments for helpful insights/discussion
- Additional Details
- Get 1%-5% cash back on deals like this with a cash back credit card. Compare the available cash back credit cards here.
Community Voting
Deal Score
+74
Good Deal
Bad Deal
Found by babgaly
Forum Thread
60% off
Found by tunabreath
Forum Thread
Found by NeedMoCoffee
Forum Thread
34% off
Found by phoinix
Forum Thread
40% off
Found by phoinix
Forum Thread
38% off
Found by itsamazeling
Forum Thread
75% off
Found by Rokket
Forum Thread
64% off
Found by wileysmiley
Forum Thread
40% off
Top Comments
Most people don't want the printer itself to be the hobby. They are getting better, cheaper and easier to use and learn. I compare it to the Iphone of printers - fairly intuitive even if it's a bit older tech. It's also enclosed, which helps with noise, humidity issues and some filament off gassing.
I've had my X1C for 2.5 years and it has been stellar. I have various nozzles from .2 to .6, but haven't tried the .8 yet. I mostly print Star Wars droids for cons, larger models and useful things, like frog ladders for my pool.
I use the AMS to change filament for large prints, not for color. The AMS 2 does driy filament, which my V1 doesnt. However, the Sunlu dryer attachment is cheaper so I pre-ordered it instead of upgrading to the 2.
The only downside I've seen has been the elitist jerks, hardcore fanboys and extreme haters in social media - but for every one of them, you find at least 4-5 of us that simply enjoy it's ease of use.
Look, I'm just gonna say it -- you're highly exaggerating right now, and Bambu doesnt have a ton of competition. You make this sound like a cut-throat industry. It's the opposite. Maybe tone that statement down a bit, because it's basically false.
Truth is almost all of the 3d print manufacturers have been chasing bambu for 3 years now. It took Creality (by far the biggest manufacturer) 3 years to make a multi color system (they call CFS) and it still isnt as good as the AMS 1. Same thing with Qidi, Flashforge, etc.
Saying these X1C machines will 'be unsellable' is laughable. The fact that they can still charge so much for this printer 3 years after launch is a testament to the brand. For example the K1C came out a year and a half ago for 560 and can be bought for around $250 now. This X1C launched at 1400 and is now 1100 when on sale.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
94 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank weigle2
https://www.microcenter
https://www.microcenter.com/produ...3d-printer
Bambu in full panic mode knowing these will be unsellable very soon. So much competition puts this to shame for the price.
What compares?
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank hrvmhv
Most people don't want the printer itself to be the hobby. They are getting better, cheaper and easier to use and learn. I compare it to the Iphone of printers - fairly intuitive even if it's a bit older tech. It's also enclosed, which helps with noise, humidity issues and some filament off gassing.
I've had my X1C for 2.5 years and it has been stellar. I have various nozzles from .2 to .6, but haven't tried the .8 yet. I mostly print Star Wars droids for cons, larger models and useful things, like frog ladders for my pool.
I use the AMS to change filament for large prints, not for color. The AMS 2 does driy filament, which my V1 doesnt. However, the Sunlu dryer attachment is cheaper so I pre-ordered it instead of upgrading to the 2.
The only downside I've seen has been the elitist jerks, hardcore fanboys and extreme haters in social media - but for every one of them, you find at least 4-5 of us that simply enjoy it's ease of use.
Our community has rated this post as helpful. If you agree, why not thank nickmv
Look, I'm just gonna say it -- you're highly exaggerating right now, and Bambu doesnt have a ton of competition. You make this sound like a cut-throat industry. It's the opposite. Maybe tone that statement down a bit, because it's basically false.
Our community has rated this post as helpful. If you agree, why not thank VSeven
Sign up for a Slickdeals account to remove this ad.
Everything being released now has multiple tool heads and bigger print area.
Everything.............such as.....? Hell its 256x256x256 which is right in line with competition.
Look, I'm just gonna say it -- you're highly exaggerating right now, and Bambu doesnt have a ton of competition. You make this sound like a cut-throat industry. It's the opposite. Maybe tone that statement down a bit, because it's basically false.
Nobody is using an X1C for what it was made to be used for. They use it to print multi filament waste. Every printer released this year does that better and faster and with less waste. Everything release this year is multihead with no waste and bigger print beds. This is a bad price for a product that is being cleared out at a price that isn't low enough when the P1S is noticeably cheaper and fully as capable.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!