Seesii-US via Amazon has has
6" Seesii Mini Cordless Electric Hand Chainsaw w/ 2x 21v Batteries & Accessories on sale for $43.99 - $22 with promo code
XDKEC2DZ at checkout =
$21.99.
Shipping is free.
Thanks Deal Hunter
Navy-Wife for sharing this deal
Includes:
- 1x Mini Chainsaw
- 2x Rechargeable Battery
- 2x Chains (1 mounted on the chain saw)
- 2x Chainsaw Files
- 1x Oil Bottle
- 1x Gloves (pair)
- 1x Charger
- 1x Nut Driver
- 1x Screw Driver
- 1x Case
Top Comments
1. Chain tension. People frequently attempt to tighten the chain by forcing the bar tight to the chain and then fixing it in place by tightening down the retaining nut. That'll only work temporarily, soon you'll be back to having a loose chain! In order to properly tension the chain, you need to (1) loosen the retaining nut until the bar is ever so slightly loose, (2) turn the adjusting screw clockwise to tighten the chain or counterclockwise to loosen the chain, (3) re-tighten the retaining nut. Doing this the right way, I can go through several cutting sessions before needing to manually adjust the chain tension again.
2. Batteries. Makita 18V batteries will work on Seesii chainsaws. I use my DeWalt 20V batteries by adding a DeWalt-to-Makita battery adapter (https://www.amazon.com/dp/B0BQR8R2JC). Works like a charm.
3. Oil. The mini-chainsaw is a low demand lubrication use and almost any oil will do for oiling the chain (cooking oil, used engine oil, transmission oil, WD40). My recommendation is to use the cheapest bar & chain oil that you can find at your local hardware store. Again, because this is a low demand lubrication use, you can lubricate the chain sparingly - you can run the saw until the chain is almost dry. (Typically, I can get by with lubricating the saw at the start and then again upon finishing the job.)
4. Periodically (at least once every other session), open up the chain cover and clean the sprocket area. Cuttings tend to accumulate in the back pocket, especially if you happen to be cutting a lot of green wood.
5. Replacement chains. I own the 6" Seesii mini-chainsaw, Model CH500 (same as the deal posted here). It uses the following chain: 6" chain, .043" Gauge, 1/4" LP Pitch, 36 Drive Links. Be careful to check the number of drive links on your order, many of the replacement chains are spec'd out with 37 drive links. That won't fit this Seesii model. If you own a different model, you'll need to check to see what chain fits your chainsaw.
Reminder: Always remove the battery before replacing or adjusting your chain.
rough, low quality.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
62 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank Marceille
Anybody buy one from the recent postings and have feedback to share?
Anybody buy one from the recent postings and have feedback to share?
I also cut down a dozen 5" to 6" diameter trees, being careful that there was nothing to hang up the tree in the fall direction to avoid kickback. With such small diameter trees, I wasn't worried about barber chairing them. Wasn't even worried about rotting conditions. I did put a tag line on a couple of trees leaning the wrong direction. All in all, 95% of the effort went into planning and setting up the cut. The fact that it took 20 seconds to complete the face cut, when a regular chainsaw would have done it in half the time, wasn't a big deal to me.
Overall, I found the Seesii chainsaw overperformed and exceeded my expectations.
Sign up for a Slickdeals account to remove this ad.
Anybody buy one from the recent postings and have feedback to share?
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!