Link:
https://refurbished.minisforum.co...860c&_ss=c
Coupon:
LIMITED10OFF
Specs:
- Ryzen 9 7945HX 16C/32T 2.5 GHz (5.4 GHz Boost, 80MB Total Cache) /w Radeon 610M Graphics
- MINISFORUM BD795i SE MoDT (Mobile On Desktop) Mini-ITX Motherboard
- 32GB (16GBx2) DDR5-5200 Memory (2x SODIMM Slot, 96GB Max)
- 2x M.2 2280 PCIe Gen 4.0x4 SSD Slots
- 1x M.2 2230 Key E Slot for NIC
- 1x PCIe 5.0 X16 Slot for GPU (with Metal Fasteners, supports Low Profile Dual Slot Card)
- 400W ATX PSU
- 11.73 x 8.86 x 3.74 inches
Ports:
- 1x USB 3.2 Gen 2 Type-C (Alt DisplayPort 1.4)
- 2x USB 3.2 Gen 1 Type-A
- 2x USB 2.0 Type-A
- 1x HDMI 2.0
- 1x DisplayPort 1.4
- 1x RJ-45 2.5G Ethernet
- 1x Line Out
FAN/Audio/USB headers
- 1x 4-pin CPU Fan header
- 2x 4-pin System Fan header
- 1x 4-pin SSD Fan header
- 1x Front Panel Audio Header
- 1x System Panel Headers
- 1x USB 3.2 Gen 1 Header
Minisforum offers a 1 year warranty on refurbished units (Chase CC can extend it to two). About as cheap as it gets for a powerful small form factor PC (w/ room to add a GPU down the road)
Leave a Comment
13 Comments
Sign up for a Slickdeals account to remove this ad.
This is a great price, honestly just for even the 795i motherboard/cpu/ram/SSD. That 7945HX is a beast of processor.
If you wanted to dress it up in another case that didn't limit you on GPU size as much, you could. Would probably necessitate a new PSU in that scenario.
This is a great price, honestly just for even the 795i motherboard/cpu/ram/SSD. That 7945HX is a beast of processor.
If you wanted to dress it up in another case that didn't limit you on GPU size as much, you could. Would probably necessitate a new PSU in that scenario.
Does this use standard PSU connections?
Sign up for a Slickdeals account to remove this ad.
This is a great price, honestly just for even the 795i motherboard/cpu/ram/SSD. That 7945HX is a beast of processor.
If you wanted to dress it up in another case that didn't limit you on GPU size as much, you could. Would probably necessitate a new PSU in that scenario.
Another note, with a 5060 this thing gets pretty toasty. Others have described it as a blast furnace. What I did to get around this is to screw two 80mm Noctua fans into the top panel. The honeycomb vent holes line up perfectly with 80mm fans you just have to make the holes a bit bigger. This puts an 80mm directly over the 5060 and it made a 20-30 degree difference running Cyberpunk which pegs out the GPU.
Oh and I don't know if the AMD variant has this as well but on the Intel one there's a third undocumented NVME slot on the bottom of the board. You have to remove the motherboard from the case to access it. So it has two Gen 4 slots. One on top and one on bottom. And a Gen 3 slot on top.
Leave a Comment