Item 1 of 2
Item 1 of 2
frontpagePoohbiwon posted Oct 15, 2025 1:51 PM
Elegoo Centauri Carbon 3D Printer
$280
$300
6% off
+ Shipping (from $30)at ELEGOO
+ Shipping (from $30)at ELEGOODeal Details
ELEGOO has its Elegoo Centauri Carbon 3D Printer for $299.99 - $20 when you apply discount code EDCCM5U at checkout = $279.99. Shipping costs start from $30 (may vary by location).
Thanks to community member Poohbiwon for sharing this deal.
Features:
Thanks to community member Poohbiwon for sharing this deal.
Features:
- Print Right Out of the Box
- Full-Auto Calibration
- CoreXY with 500 mm/s Velocity
- 20,000 mm/s² Acceleration
- Unleash Creativity with Every Filament
- Chamber Camera Acts as Your Eyes
- Build Volume 256 × 256 × 256 mm
Editor's Notes
Written by qwikwit | Staff- This price is $20 less than the previous Frontpage Deals.
- Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
ELEGOO has its Elegoo Centauri Carbon 3D Printer for $299.99 - $20 when you apply discount code EDCCM5U at checkout = $279.99. Shipping costs start from $30 (may vary by location).
Thanks to community member Poohbiwon for sharing this deal.
Features:
Thanks to community member Poohbiwon for sharing this deal.
Features:
- Print Right Out of the Box
- Full-Auto Calibration
- CoreXY with 500 mm/s Velocity
- 20,000 mm/s² Acceleration
- Unleash Creativity with Every Filament
- Chamber Camera Acts as Your Eyes
- Build Volume 256 × 256 × 256 mm
Editor's Notes
Written by qwikwit | Staff- This price is $20 less than the previous Frontpage Deals.
- Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
Community Voting
Deal Score
+36
Good Deal
Bad Deal
Found by babgaly
Forum Thread
50% off
Found by phoinix
Forum Thread
66% off
Found by Izzy138
Forum Thread
67% off
Found by UkeDog
Forum Thread
82% off
Found by Immortalsolitude
Forum Thread
32% off
Found by Tel06c
Forum Thread
40% off
Found by Dr.W
Forum Thread
33% off
Top Comments
Long story short, it started clogging from day 1. No matter what I did and how many times I unclogged it, it would continue to clog. It took about 3 months to get the issue fixed. To be fair though, a lot of those 3 months were me being out of the country and/or not feeling like dealing with a clogged printer.
Credit to Elegoo's customer service who were pretty good about helping out. They sent me a replacement extruder at no cost, which didn't help with the clogging issue. They ended up sending me the entire printer head and that finally fixed the problem. Now that it's working, I have to say at times it prints better than my P1S.
Would I suggest this printer? Yeah if you aren't a total noob to 3D printing. If you are and just want the most minimal hassle, I suggest waiting for a sale and spending a little bit more for a Bambu.
They also use sketchy "pre-order" tactics- they claim special pre-order pricing, but it never changes. This printer was supposedly $299 during preorder with a "retail" price of $500, yet it's still $299 months later. Apparently, all their printers follow the same pricing gimmick.
Not sure if that saves anyone money or if they would send you the same, or any, offer, but if your are considering this printer then maybe try adding one to your cart and wait a day or two to see if they send an offer. Mine was before the announcement of V2 as well so they may be getting even more aggressive with the discounts to clear out inventory.
edit: this is the specific listing I used to add to my cart ... https://ebay.us/m/GZPYnh
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
77 Comments
Sign up for a Slickdeals account to remove this ad.
Internals are different, it's not just a "lite refresh".
After many emails, support first wanted me to replace the motors myself, but I refused. They eventually sent a replacement printer at the end of August. It worked for about two weeks before new problems started — the filament wouldn't stick, then it formed a blob around the nozzle and stopped printing completely.
I asked for a refund or another replacement, but they refused and only sent parts with a long, complicated repair guide. Even after doing everything and checking YouTube for help, the printer still failed — now the print head won't heat properly.
I've tried multiple times to escalate my case, but those requests are ignored, and since they only reply once a day, every step takes forever. Now, in mid-October, they're offering to send yet another cable. After nearly three months, two printers, and over 50 emails, it's worked less than two weeks total.
Internals are different, it's not just a "lite refresh".
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank jesterfx
Not sure if that saves anyone money or if they would send you the same, or any, offer, but if your are considering this printer then maybe try adding one to your cart and wait a day or two to see if they send an offer. Mine was before the announcement of V2 as well so they may be getting even more aggressive with the discounts to clear out inventory.
edit: this is the specific listing I used to add to my cart ... https://ebay.us/m/GZPYnh
Internals are different, it's not just a "lite refresh".
I would not buy one today if I had any hope of multi material, if that's what you want get an ad5x or spend up and get the p2s combo. Never buy something based on future promises and it's looking like if the multi material system ever does come out for the CC1, based on the CC2, it will be tacked on and not worth the money.
You have a link to a -reliable- source for that information?
https://www.reddit.com/r/elegoo/c...tarted_in/
FYI, I'm a casual 3D printer guy who has yet to learn any design. My first 3D printer was an Elegoo Neptune 4 Pro and it was great for me.
Sign up for a Slickdeals account to remove this ad.
Internals are different, it's not just a "lite refresh".
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!