GigaParts catalogue page Icom IC-7300MK2 [gigaparts.com].Icom Press release Icom Unveils New IC-7300MK2 HF / 50 / (70) MHz Transceiver [icomamerica.com] PRE-RELEASE INFORMATION HF / 50 / (70) MHz TRANSCEIVER |7300MK2 [icomamerica.com] Official company ICOM IC-7300MK2 product webpage https://www.icomjapan.c Icom IC-7300MK2 BASIC MANUAL (English) Download https://www.icomamericaThe ICOM IC-7300MK2 has many of the same features as the ICOM IC-7300.
Official company ICOM IC-7300 product webpage https://www.icomjapan.cMembers can Subscribe to this Thread to get notification when something new is posted to this thread. This can act as a daily reminder to enter.
They seem to be asking a lot of technical questions which licensed hams should know.
Your browsers AI search engine should be able to find the answer in case you don't know.
They are reusing some questions from the last time the prize was an ICOM IC-7300 in 2024.
See: https://slickdeals.net/f/17467908-gigaparts-yaesu-icom-ic-7300-august-8-2024-fcc-licensed-us-amateur-operators-only?t=17467908
I encourage you to post both the question and the answer and not just the answer..
Historically, GigaParts has repeated the same questions from one sweepstakes in later ones.
If you post the question, then in a later sweepstakes when they repeat the question you can do a
keyword search of the previous thread and quickly find the answer.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
200 Comments
Sign up for a Slickdeals account to remove this ad.
In the 'FEATURES' section, what size is the Icom IC-7300MK2 color TFT touch LCD?
Answer: 4.3 inch
Entry page https://www.gigaparts.n
IPS TFT displays offer superior color accuracy, better image quality, and wider, more stable viewing angles.
Do you see what they say was the correct answer to yesterdays quiz?
According to 'SUPPLIED ACCESSORIES', what is the voltage and amperage of the Icom IC-7300MK2 European version's spare DC cable fuse?
Answer: I don't know
Entry page https://www.gigaparts.n
32 V 25 A was marked as wrong.
I didn't see any fuse specs in the 'SUPPLIED ACCESSORIES' or any indication that the DC fuses for the European version are any different from the US version. Fuse specs are listed under "Includes.' Since the rig draws 21 amps in TX mode
of the four choices:
58 V 5 A
32 V 25 A
32 V 30 A
13.8 V 20 A
58 V 5 A and 13.8 V 20 A would be too small for a rig that draws 21 A . Since 32 V 25 A is marked as wrong that leaves only 32 V 30 A as the only possible answer. But it wouldn't surprise me that they would mark that as wrong too.
I don't see any reason for the European version to require a bigger DC fuse.
Icom IC-7300MK2 Transceiver
HM-219 Hand Microphone
13 pin ACC plug
1/4 inch stereo CW key plug
1/8 inch stereo speaker plug
Spare fuse (58V 5A)
DC power cable (9.8ft)
2x spare fuse (32V 25A)
I didn't see any fuse specs in the 'SUPPLIED ACCESSORIES' or any indication that the DC fuses for the European version are any different from the US version.
Under 'EXPLICIT DEFINITIONS', which term defines a situation where "Personal injury, fire hazard or electric shock may occur" for the Icom IC-7300MK2?
Answer: WARNING!
Entry page https://www.gigaparts.n
Page Two of the BASIC MANUAL
Sign up for a Slickdeals account to remove this ad.
In 'ABOUT SPURIOUS SIGNALS', which of the following is an internal circuit frequency where the Icom IC-7300MK2 may receive spurious signals?
ANSWER: 9.140 MHz
In 'ABOUT THE TOUCH SCREEN', what is the specific Icom IC-7300MK2 beep response when the display is touched for 1 second?
Answer: One short and one long beep
Entry page https://www.gigaparts.n
Page Four of the BASIC MANUAL
If the display is touched for 1 second, one short
and one long beep sound.
In 'PANEL DESCRIPTION', how long must the Icom IC-7300MK2 POWER key be held down to turn the transceiver OFF?
Answer: 1 second
Entry page https://www.gigaparts.n
Page Twelve of the BASIC MANUAL
transceiver.
In 'PANEL DESCRIPTION', what is the specific purpose of the Icom IC-7300MK2 [PHONES] jack?
Answer: Standard Stereo Headphones
In the 'Rear panel' description, what is the required DC source voltage for the Icom IC-7300MK2?
Answer: 13.8 V DC
Entry page https://www.gigaparts.n
Page fourteen of the BASIC MANUAL
In 'Rear panel' descriptions, what is the specified impedance of the Icom IC-7300MK2 [ANT] antenna connector?
Answer: 50 ohm
Entry page https://www.gigaparts.n
Page fourteen of the BASIC MANUAL
In 'Rear panel' descriptions, which Icom IC-7300MK2 port allows connection to an external display monitor?
Answer: HDMI Port
Entry page https://www.gigaparts.n
Page fourteen of the BASIC MANUAL
Sign up for a Slickdeals account to remove this ad.
In 'INSTALLATION AND CONNECTIONS', what is the specified operating temperature range for the Icom IC-7300MK2 transceiver?
Answer: –10°C ~ +60°C
Entry page https://www.gigaparts.n
Page nineteen of the BASIC MANUAL
transceiver (–10°C ~ +60°C, +14°F ~ +140°F).
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!