Advance Auto Parts has
AutoCraft Pressure Washer Gun w/ Foam Cannon, Stubby Trigger & 5 Nozzles (AC4700) for
$10.35. Free store pickup is available where stock permits, otherwise shipping is free on orders $35+.
Note: Availability for pickup may vary by location.
Thanks to community member
blingkblingk for finding this deal.
About this item: - Pressure washer gun is Metric M22-14mm inner connector. It will not fit 3/8 in. hose connector and garden hose
- 1/4" Brass Connector for easy assembly
- Solid brass components are resistance to corrosion and rusting
- Foam Cannon coats dirty surfaces with suds for a quick clean
- Includes Pressure Washer Gun and 5 Nozzle Tips that can be used separately from theFoam Cannon
- YELLOW 15 Deg. Tip : For cleaning brick, concrete or other hard surfaces.
- GREEN 25 Deg. Tip : For cleaning wood, siding, and painted surfaces.
- WHITE 40 Deg. Tip : For cleaning screens and windows.
- BLACK 65 Deg. Tip : For use with any water soluble soaps
- Has a Metric M22-14 inner connector. It will not fit a 3/8" hose connector or garden hose.
- 1/4" Brass Connector for easy assembly
- Solid brass components are resistance to corrosion and rusting
- Foam Cannon coats dirty surfaces with suds for a quick clean
Top Comments
Community Reviews
This AutoCraft foam cannon and pressure washer gun is mainly valued as a cheap way to add foam washing to a pressure washer setup. The kit is described as working with most electric and gas pressure washers, with a minimum 2.0 GPM and over 1,000 PSI, and the included five nozzle tips add flexibility. The big catch is compatibility, since it uses a Metric M22 14 mm connector and will not fit a garden hose or 3 8 inch hose setup. Foam results also depend on dilution and the right shampoo, so it is best suited to pressure washer owners who already have the needed connection.
Common Questions (5)
Some pickup orders were discounted further at checkout, with totals reported around $7.76 to under $16 for two units. A SpeedPerks $5 coupon and a 25% clearance pickup discount were also applied in some cases.
No. A garden hose's 50-70 PSI is far too low, and the cannon is meant to use pressure washer output over 1,000 PSI to create foam. Without that pressure, it will not work well.
No. It uses a Metric M22-14mm inner connector and will not fit a 3/8 in. hose connector or a garden hose. It needs to connect to a pressure washer pressure hose.
It requires a pressure washer with at least 2.0 GPM and over 1000 PSI. The listed working pressure is 2,175 PSI and the maximum pressure is 4,350 PSI, so it should work with most electric and gas pressure washers that meet those minimums.
Dilute the shampoo in the cannon tank, with a starting range around 1:10 to 1:15. A snow-foam-specific shampoo is not required; a standard car wash shampoo like Meguiar's Gold Class can work.
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
43 Comments
Sign up for a Slickdeals account to remove this ad.
Sign up for a Slickdeals account to remove this ad.
I picked up the 2x that I ordered, total in store pickup receipt was under $16 total with tax.
I have a foam cannon with a pressure washer and it works well, but to be honest with you, I don't even use it anymore. It really doesn't make washing your car any easier, better, or safer. In the end, you are still going to need to use a cloth or wipe to wash the car. It's not like you can just apply and rinse (well you can if you like wash your car twice a week when the car is barely dirty). You also end up using way more soap than normal.
You should however dilute the shampoo in the foam cannon tank, experiment between 1:10 and 1:15 to see which works better for you.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!