4-Pack 500g SUNLU PLA+ 2.0 or Silk 3D Printer Filament Bundle Refills (Assorted) $19.99 w/ Prime (Fits Bambu Spools)

TrollingBy

Nov 26, 2025 1:32 PM

4.1K Comments

Joined Nov 2013

TrollingByNov 26, 2025 1:32 PM

4.1K Comments

Our community has rated this post as helpful. If you agree, why not thank

These are .5kg each so it is $10/kg

7

6

gabe23111

Original Poster

Pro

Expert

This user is an Expert in Home & Home Improvement

Nov 26, 2025 2:12 PM

17.8K Comments

Joined Jul 2008

gabe23111Nov 26, 2025 2:12 PM

Original Poster

Pro

Expert

This user is an Expert in Home & Home Improvement

17.8K Comments

Our community has rated this post as helpful. If you agree, why not thank

Quote from TrollingBy

:

These are .5kg each so it is $10/kg

Correct. There are benefits of smaller rolls if you don't need too much of a specific color/s. I try to buy refills personally when I can as I have a ton of empty Spools already.

This PLA+ 2.0 is pretty good. I'm in the middle of printing a filament storage rack with it (see attached) currently about 25 rows high and plan to go several more to maximize space in my printing room. It's supporting the weight well.

Last edited by gabe23111 November 26, 2025 at 06:16 AM.

1

3

tcope

Nov 26, 2025 3:40 PM

3.5K Comments

Joined Sep 2005

tcopeNov 26, 2025 3:40 PM

3.5K Comments

$10/spool for PLA is a high everyday price.

5

4

Jacobfllr

Nov 26, 2025 3:44 PM

47 Comments

Joined Jan 2017

JacobfllrNov 26, 2025 3:44 PM

47 Comments

Quote from gabe23111

:

Correct. There are benefits of smaller rolls if you don't need too much of a specific color/s. I try to buy refills personally when I can as I have a ton of empty Spools already. This PLA+ 2.0 is pretty good. I'm in the middle of printing a filament storage rack with it (see attached) currently about 25 rows high and plan to go several more to maximize space in my printing room. It's supporting the weight well.

Love it! Can you share the stl for this? I could totally use it!

gabe23111

Original Poster

Pro

Expert

This user is an Expert in Home & Home Improvement

Nov 26, 2025 3:48 PM

17.8K Comments

Joined Jul 2008

gabe23111Nov 26, 2025 3:48 PM

Original Poster

Pro

Expert

This user is an Expert in Home & Home Improvement

17.8K Comments

Quote from tcope

:

$10/spool for PLA is a high everyday price.

Thank you for your always helpful and inciteful comments.

Quote from Jacobfllr

:

Love it! Can you share the stl for this? I could totally use it!

Sure! https://makerworld.com/en/models/...Id-1010841

It was about 3 hour print per. My Centauri Carbon was able to handle ludicrous mode, but my P1S couldn't. I went double barrel with these to spit them out faster lol.

2

the.barbrR

Nov 26, 2025 3:52 PM

2.6K Comments

Joined Dec 2008

the.barbrRNov 26, 2025 3:52 PM

2.6K Comments

Quote from gabe23111

:

Correct. There are benefits of smaller rolls if you don't need too much of a specific color/s. I try to buy refills personally when I can as I have a ton of empty Spools already. This PLA+ 2.0 is pretty good. I'm in the middle of printing a filament storage rack with it (see attached) currently about 25 rows high and plan to go several more to maximize space in my printing room. It's supporting the weight well.

Glad you opted for the +. I printed that rack 7 high and 6 across with regular pla about 3 months ago and some of the bottom ones are starting to warp from the weight with standard PLA. I might have to replace some of the bottom ones with PLA+. I got in on a good deal with Soyelin PLA rolls at just under $5 a roll, so it was worth a shot.

Jacobfllr

Nov 26, 2025 4:44 PM

47 Comments

Joined Jan 2017

JacobfllrNov 26, 2025 4:44 PM

47 Comments

Quote from gabe23111

:

Thank you for your always helpful and inciteful comments. Sure! https://makerworld.com/en/models/...Id-1010841It was about 3 hour print per. My Centauri Carbon was able to handle ludicrous mode, but my P1S couldn't. I went double barrel with these to spit them out faster lol.

You're awesome. Thanks for sharing! I've got two X1c's with E3D HF nozzles so hopefully I can handle 167% speed but time will tell. Thanks again for sharing man! I really appreciate it

gabe23111

Original Poster

Pro

Expert

This user is an Expert in Home & Home Improvement

Nov 26, 2025 4:47 PM

17.8K Comments

Joined Jul 2008

gabe23111Nov 26, 2025 4:47 PM

Original Poster

Pro

Expert

This user is an Expert in Home & Home Improvement

17.8K Comments

Quote from Jacobfllr

:

You're awesome. Thanks for sharing! I've got two X1c's with E3D HF nozzles so hopefully I can handle 167% speed but time will tell. Thanks again for sharing man! I really appreciate it

NP. Just wait until after the 1st layer is done before ramping up the speed. On both printers I was using the Biqu Frostbite as the faster you print, the more a risk of adhesion issues, but you should be fine as long as your plate is clean.

helicopter2

Nov 26, 2025 4:50 PM

2.5K Comments

Joined Dec 2010

helicopter2Nov 26, 2025 4:50 PM

2.5K Comments

Quote from tcope

:

$10/spool for PLA is a high everyday price.

If $10/kg was available regularly for 1kg purchases I would buy a lot more as I could get more variety. It is actually much higher than this though. More like $15-25/kg

4

2

gabe23111

Original Poster

Pro

Expert

This user is an Expert in Home & Home Improvement

Nov 26, 2025 4:50 PM

17.8K Comments

Joined Jul 2008

gabe23111Nov 26, 2025 4:50 PM

Original Poster

Pro

Expert

This user is an Expert in Home & Home Improvement

17.8K Comments

Quote from the.barbrR

:

Glad you opted for the +. I printed that rack 7 high and 6 across with regular pla about 3 months ago and some of the bottom ones are starting to warp from the weight with standard PLA. I might have to replace some of the bottom ones with PLA+. I got in on a good deal with Soyelin PLA rolls at just under $5 a roll, so it was worth a shot.

Yea, you want to use a stronger PLA or PETG. I burned through a lot of Soyelin and wouldn't trust any weight on it.

avrod75

Nov 26, 2025 5:03 PM

17 Comments

Joined Aug 2022

avrod75Nov 26, 2025 5:03 PM

17 Comments

would this fit a bambu lab ams 2 pro or would I need and adapter?

BogartOfElCajon

Pro

Nov 26, 2025 6:27 PM

796 Comments

Joined Aug 2011

BogartOfElCajon

Pro

Nov 26, 2025 6:27 PM

796 Comments

Quote from avrod75

:

would this fit a bambu lab ams 2 pro or would I need and adapter?

Please correct me if I'm wrong, but wouldn't you just put this in a regular spool to fit in any ams? unless the AMS pro uses different kind of spools like others.

Archimedes001

Pro

Nov 26, 2025 7:05 PM

809 Comments

Joined Nov 2005

Archimedes001

Pro

Nov 26, 2025 7:05 PM

809 Comments

Ok I'm fairly new to 3d printing, does this Sunlu come with a reusable spool?

Black 1kg [amazon.com]

I wanted to know if I can use these refills on this once it's used up. Thanks.

tcope

Nov 26, 2025 7:45 PM

3.5K Comments

Joined Sep 2005

tcopeNov 26, 2025 7:45 PM

3.5K Comments

Quote from helicopter2

:

If $10/kg was available regularly for 1kg purchases I would buy a lot more as I could get more variety. It is actually much higher than this though. More like $15-25/kg

It's not. Can be found everyday no Amazon for $10//spool. Don't ask me to provide a link... I always have in the past. I get tired of doing other people's searches (I know you did not ask).

1

5

tcope

Nov 26, 2025 7:48 PM

3.5K Comments

Joined Sep 2005

tcopeNov 26, 2025 7:48 PM

3.5K Comments

Quote from avrod75

:

would this fit a bambu lab ams 2 pro or would I need and adapter?

It fits all AMSs.

1

4-Pack 500g SUNLU PLA+ 2.0 or Silk 3D Printer Filament Bundle Refills (Assorted) $19.99 w/ Prime (Fits Bambu Spools)

$20

$31

Community Voting

Join The Conversation

28 Comments

Join The Conversation

Related Searches