Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
Missed This Deal? Get alerts when similar deals are posted.
expired
expired
gabe23111 18K Views
Nov 27, 2025 1:28 PM

Certified Refurbished w/ 2-yr Warranty: Creality K1 SE FDM 3D Printer

$111

$139

20% off
+ Free Shippingat eBay
Visit eBay

Why are you downvoting this deal?

Good Deal?
80Comments
Save
Share
Deal Details
creality_refurbished via eBay has Creality K1 SE FDM 3D Printer (Certified Refurbished) on sale for $139 - $27.80 w/ coupon code CYBERWEEK20 = $111.20. Shipping is free.

Thanks to Community Member gabe23111 for sharing this deal.
  • Note: Includes a 2-year warranty serviced by Allstate.
Fearures:
  • Build volume: 220x220x250mm
  • Product dimensions: 355x355x482mm
  • Printing speed: ≤600mm/s
  • Acceleration : ≤20000mm/s²
  • Layer Height: 0.1-0.35mm
  • Extruder: Dual-gear direct drive extruder
  • Filament diameter: 1.75mm
  • Nozzle diameter: 0.4mm
  • Nozzle temperature: ≤300 °C
  • Heatbed temperature: ≤1200 °C
  • Build surface: Epoxy resin build plate
  • Levelling mode: Hands-free auto leveling
  • File transfer: USB drive, WiFi
  • Display screen: Colour touchscreen

Editor's Notes

Written by persian_mafia | Staff
  • Offer valid for a limited time only /while supplies last.
  • This offer beats our previous front-page deal from late July of this year.

Original Post

Written by gabe23111
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
creality_refurbished via eBay has Creality K1 SE FDM 3D Printer (Certified Refurbished) on sale for $139 - $27.80 w/ coupon code CYBERWEEK20 = $111.20. Shipping is free.

Thanks to Community Member gabe23111 for sharing this deal.
  • Note: Includes a 2-year warranty serviced by Allstate.
Fearures:
  • Build volume: 220x220x250mm
  • Product dimensions: 355x355x482mm
  • Printing speed: ≤600mm/s
  • Acceleration : ≤20000mm/s²
  • Layer Height: 0.1-0.35mm
  • Extruder: Dual-gear direct drive extruder
  • Filament diameter: 1.75mm
  • Nozzle diameter: 0.4mm
  • Nozzle temperature: ≤300 °C
  • Heatbed temperature: ≤1200 °C
  • Build surface: Epoxy resin build plate
  • Levelling mode: Hands-free auto leveling
  • File transfer: USB drive, WiFi
  • Display screen: Colour touchscreen

Editor's Notes

Written by persian_mafia | Staff
  • Offer valid for a limited time only /while supplies last.
  • This offer beats our previous front-page deal from late July of this year.

Original Post

Written by gabe23111

Community Voting

Deal Score
+79
Good Deal
Bad Deal

Why are you downvoting this deal?

Visit eBay

Top Comments

ZeeLobby
859Comments
105Reputation
Set and forget. As in something that just works and will work for thousands of hours. Personally I'd recommend Bambu, Prusa, and to some degree Flashforge.

They're pricier, but other brands require maintenance and mods that these usually don't. They print great out the box. $399 for a Bambu P1S is a great starter printer.
Go to Comment
ZeeLobby
859Comments
105Reputation
Personally I'd go with a set and forget printer to start and have fun modeling and actually printing things.

Id say if you like to tinker this is a good second printer. Then you can use your reliable workhorse to print replacement parts and mods for your project creality, heh.
Go to Comment
ZeeLobby
859Comments
105Reputation
Yeah. It's moreso that many people who say they love to tinker don't really love to do this kind of tinkering. Spending hours trying to figure out why adhesion isn't working, when in the end the bed is just warped out the gate is not a fun time tinkering.
Go to Comment

Community Reviews

The K1 SE is a fast Core XY printer that can feel close to plug and play for PLA, with auto leveling, input shaping, and strong out of the box speed for the price. The enclosure version is better suited to ABS because it helps keep warm air around the print and reduce warping, though it does not handle fumes, so ventilation still matters. The refurb angle is the main risk, since some units arrive dusty or need small fixes, while others print flawlessly after a quick setup. A solid low cost pick if you are comfortable checking a refurb.

Common Questions (5)

AI-generated summary based on comments from the community. Updated ago

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

80 Comments

Sign up for a Slickdeals account to remove this ad.

Nov 30, 2025 7:02 PM
6.7K Comments
Joined Jun 2006
WIckedNewsNov 30, 2025 7:02 PM
6.7K Comments
Quote from ZeeDuck View quoted comment :
The nice thing about the market is a lot of printers are really reliable these days. Bambu is good. So are printers like this one. The P2S is what, 4-5x the price of this printer deal? Yeah, not apples to apples since this is a refurb etc but damn, $111 is not the same as $500+ and this isn't an Ender 3Pro. I would have more sympathy if you said get the Flashforge 5M since, with recent sales, that's at least ball park similar and, like the Bambu, it's a printer that just works. Wink

Like Apple, it just works.
Nov 30, 2025 7:30 PM
18 Comments
Joined Sep 2020
PowerfulMoon1450Nov 30, 2025 7:30 PM
18 Comments
How to buy Flashforge for similar price? Does it require apply a credit card?
Nov 30, 2025 8:51 PM
2.4K Comments
Joined Feb 2013
ZeeDuckNov 30, 2025 8:51 PM
2.4K Comments
Quote from WIckedNews View quoted comment :
Like Apple, it just works.
Like Apple, you can often get something that works just as well and has additional features (some that Apple doesn't even offer) for less if you look around Wink

That and Apple is getting rather bad about closed eco system etc. Also, if someone says they have $500 to spend on a Laptop there are basically no Apple options. If someone says they want to say under $200 the A1 mini is the only option (at $199). It's a very compromised option.
Nov 30, 2025 9:11 PM
14 Comments
Joined Oct 2011
kargo27Nov 30, 2025 9:11 PM
14 Comments
Quote from xlaxplaya View quoted comment :
Exactly. It's important to remember that little issues like that, which aren't a big deal for you and me, are a HUGE deal for many others. They either don't have the technical ability, or simply don't have the time, to diagnose a simple problem like that. For them, a missing grommet is a showstopping issue that makes their new printer a brick. So I tend to emphasize that printers like these are "for tinkerers" when talking about them, just to err on the safe side and help people avoid having a bad experience.
Ok, I'm in solid on this, I bought a camera for it, LOL. Hope it works.
Dec 1, 2025 2:01 AM
356 Comments
Joined Mar 2006
gooneygoogooDec 1, 2025 2:01 AM
356 Comments
F it, I'm in. There's 6 left, fyi, y'all.
Hopefully I actually use this one. I bought a resin printer a few years ago, and never got to it, so I sold it last year.
Dec 1, 2025 4:41 AM
9 Comments
Joined Jun 2019
Brent6Dec 1, 2025 4:41 AM
9 Comments
OOS :/
Dec 1, 2025 7:01 AM
590 Comments
Joined Feb 2006
djurg1Dec 1, 2025 7:01 AM
590 Comments
i want to make things like poles for my plants & flower pots. Will this do that?

Sign up for a Slickdeals account to remove this ad.

Dec 1, 2025 10:42 AM
1 Comments
Joined Dec 2020
TalentedDeer438Dec 1, 2025 10:42 AM
1 Comments
The 20% off coupon applies to many items on here. I ended up getting a K1 Max for $300
Dec 2, 2025 1:55 AM
186 Comments
Joined Jan 2008
bluersubaruDec 2, 2025 1:55 AM
186 Comments
Don't forget to get the AI camera also. Its plug and play with error detection and time-lapse. Ebay had it for $11 with the coupon.
Dec 3, 2025 5:01 AM
14 Comments
Joined Oct 2011
kargo27Dec 3, 2025 5:01 AM
14 Comments
Quote from xlaxplaya View quoted comment :
Exactly. It's important to remember that little issues like that, which aren't a big deal for you and me, are a HUGE deal for many others. They either don't have the technical ability, or simply don't have the time, to diagnose a simple problem like that. For them, a missing grommet is a showstopping issue that makes their new printer a brick. So I tend to emphasize that printers like these are "for tinkerers" when talking about them, just to err on the safe side and help people avoid having a bad experience.
OK got it in and you were spot on. Printed the Benchy perfectly and also another test file that deals with speed. Then I started to print a simple Creality tray. First layer looked horrible so I thought, let me clean the plate really well and see if it had oil on it or something. Nope that wasn't it. The offset looks too low so I adjusted it and got it decent but it seems like the bed leveling wasn't quite right. So I thought well maybe it's got a nozzle clog or it's loose, or something like that. I had an extra unicorn nozzle for my other K-1. So I take this one off and it's not a unicorn nozzle and I'm like WTF? I dug into it more. Oh yes it was a unicorn nozzle and it snapped off and the neck of it was lodged in the heat sink. So after 2 1/2 hours of tinkering, I tapped the stuck neck out of the heatsink and was able to put the new unicorn nozzle in. But in my haste because I was trying to do it before I had to go to bed, I got melted filament in the extruder. That one's on me so tomorrow, I will have to take it apart and clean it out because it's clicking and I know it's jammed full of filament. OK it cost me my time and a new unicorn nozzle, oh and the adapter thing that holds the nozzle to the heatsink was loose, so I would definitely go through it and make sure everything's tight under there. But all in all still a good deal and I know I'll be able to get it running fine again. The more I think about it I think the reason why that first layer looked like crap was because of that loose nozzle. There's a bracket that holds it to the heat sink and it has two small hex screws that secure it and there was play in mine even when it was tightened it's hard to explain you'd have to look at it, lol.
Dec 3, 2025 11:04 PM
342 Comments
Joined Jul 2003
JairusDec 3, 2025 11:04 PM
342 Comments
Thanks OP, got one, pretty happy with it so far.
Dec 3, 2025 11:11 PM
1K Comments
Joined Dec 2015
xlaxplayaDec 3, 2025 11:11 PM
1K Comments
Quote from kargo27 View quoted comment :
OK got it in and you were spot on. Printed the Benchy perfectly and also another test file that deals with speed. Then I started to print a simple Creality tray. First layer looked horrible so I thought, let me clean the plate really well and see if it had oil on it or something. Nope that wasn't it. The offset looks too low so I adjusted it and got it decent but it seems like the bed leveling wasn't quite right. So I thought well maybe it's got a nozzle clog or it's loose, or something like that. I had an extra unicorn nozzle for my other K-1. So I take this one off and it's not a unicorn nozzle and I'm like WTF? I dug into it more. Oh yes it was a unicorn nozzle and it snapped off and the neck of it was lodged in the heat sink. So after 2 1/2 hours of tinkering, I tapped the stuck neck out of the heatsink and was able to put the new unicorn nozzle in. But in my haste because I was trying to do it before I had to go to bed, I got melted filament in the extruder. That one's on me so tomorrow, I will have to take it apart and clean it out because it's clicking and I know it's jammed full of filament. OK it cost me my time and a new unicorn nozzle, oh and the adapter thing that holds the nozzle to the heatsink was loose, so I would definitely go through it and make sure everything's tight under there. But all in all still a good deal and I know I'll be able to get it running fine again. The more I think about it I think the reason why that first layer looked like crap was because of that loose nozzle. There's a bracket that holds it to the heat sink and it has two small hex screws that secure it and there was play in mine even when it was tightened it's hard to explain you'd have to look at it, lol.
LOL wow you've already had an adventure. Mine is supposedly getting delivered tonight, we'll see how it is.
Dec 4, 2025 6:29 AM
14 Comments
Joined Oct 2011
kargo27Dec 4, 2025 6:29 AM
14 Comments
Quote from xlaxplaya View quoted comment :
LOL wow you've already had an adventure. Mine is supposedly getting delivered tonight, we'll see how it is.
Good luck, let us know how it goes. LOL.
Last edited by kargo27 December 7, 2025 at 06:11 PM.
Dec 5, 2025 12:45 AM
1K Comments
Joined Dec 2015
xlaxplayaDec 5, 2025 12:45 AM
1K Comments
Quote from kargo27 View quoted comment :
Good luck, let me know how it goes. LOL.
Update: I got a good one (so far).

Mine was pretty dusty, had some scratches on the bed, and a disconnected bowden tube that I easily popped back in. Those were the only issues that I could see. And now it has cranked out four prints that I'm very happy with. I see some slight ghosting/ringing on vertical walls that I want to get rid of, but it's minor. I suspect that I can get it to go away just by slowing down a bit, and I'm also seeing people on forums say I should turn off the "arc configure" setting in the slicer.

Also, hot DAMN this thing prints fast. I already bought the AI camera upgrade, found one on eBay for $13. Add that to the $111 printer purchase, and this will be the best $124 that I've ever spent. I probably won't bother upgrading to an enclosure unless I decide to print ABS/Nylon one day.

Sign up for a Slickdeals account to remove this ad.

Dec 6, 2025 5:52 AM
210 Comments
Joined Dec 2007
drewcpDec 6, 2025 5:52 AM
210 Comments
Quote from xlaxplaya View quoted comment :
Update: I got a good one (so far).

Mine was pretty dusty, had some scratches on the bed, and a disconnected bowden tube that I easily popped back in. Those were the only issues that I could see. And now it has cranked out four prints that I'm very happy with. I see some slight ghosting/ringing on vertical walls that I want to get rid of, but it's minor. I suspect that I can get it to go away just by slowing down a bit, and I'm also seeing people on forums say I should turn off the "arc configure" setting in the slicer.

Also, hot DAMN this thing prints fast. I already bought the AI camera upgrade, found one on eBay for $13. Add that to the $111 printer purchase, and this will be the best $124 that I've ever spent. I probably won't bother upgrading to an enclosure unless I decide to print ABS/Nylon one day.
Recieved mine today. And I'm not even going tp try to print with it.
One foot won't lay flat. There is filament residue on the end of the nozzle. Bowden tube disconnected. Nozzle clear tool has burnt filament residue on it. Screen has fingerprints/smudges. Pet hair on snipping tool. No instructions for assembly. And the protective packaging foam was just kind of tossed in the box. No USB drive.

I have requested a return.

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

Related Searches

ComputersPrinters3D PrintersFree ShippingOccasionsBlack FridayChristmas