popularartcab posted Yesterday 04:15 PM
Item 1 of 2
Item 1 of 2
popularartcab posted Yesterday 04:15 PM
HomeSeer HSM200 Z-Wave Multi-Sensor - $19.98 + shipping
$20
$50
60% offGood Deal
Bad Deal
Save
Share
Get Deal at Retailer
Deal Details
HomeSeer HSM200 Z-Wave Multi-Sensor - &19.98
AC Powered Multi-sensor With RGB Indicator
HSM200 senses motion, temperature and light level and it can be programmed to display up to 7 different glowing colors when things happen in the home. The unit is line powered so there are no batteries to change and it works as a repeater for your Z-Wave network.
https://shop.homeseer.c
AC Powered Multi-sensor With RGB Indicator
HSM200 senses motion, temperature and light level and it can be programmed to display up to 7 different glowing colors when things happen in the home. The unit is line powered so there are no batteries to change and it works as a repeater for your Z-Wave network.
https://shop.homeseer.c
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
HomeSeer HSM200 Z-Wave Multi-Sensor - &19.98
AC Powered Multi-sensor With RGB Indicator
HSM200 senses motion, temperature and light level and it can be programmed to display up to 7 different glowing colors when things happen in the home. The unit is line powered so there are no batteries to change and it works as a repeater for your Z-Wave network.
https://shop.homeseer.c
AC Powered Multi-sensor With RGB Indicator
HSM200 senses motion, temperature and light level and it can be programmed to display up to 7 different glowing colors when things happen in the home. The unit is line powered so there are no batteries to change and it works as a repeater for your Z-Wave network.
https://shop.homeseer.c
Community Voting
Deal Score
+8
Good Deal
Bad Deal
$700$89822% off$699.96: 55" Samsung QLED 4K LS03D The Frame Series Quantum HDR Smart TV (2024 Model) at Amazon
6
There is no voting data on this thread
$520$67923% offApple Watch Ultra 3 (GPS+Cellular) 49mm Titanium Case with Anchor Blue Ocean Band - Natural - (2025) - Open Box - Starting at: $519.99
6
There is no voting data on this thread
$5.00$9.6648% offButterball, Frozen Young Turkey, 14 lbs, Serves 5 - 8 $5
4
There is no voting data on this thread
$400$53024% off$399.99: Axial RC Crawler 1/8 AXP8 Gilamon 2.2 4X4 RTR Brushed Trail Buggy, Green (Battery and Charger Not Included), AXI-1207T1 at Amazon
0
There is no voting data on this thread
$4.98$3083% offGap Girls' Sandals & Flats from $4.98 & More + Free Shipping
0
There is no voting data on this thread
$140$140Crucial P510 2TB Gen5 NVMe SSD, Up to 10,000 MB/s, PCIe 5.0 M.2 2280 SSD $139.99
3
There is no voting data on this thread
Energizer Recharge Value Charger for NiMH Rechargeable AA and AAA Batteries $10 after $1 clip Q, Prime Shipped AMZ
0
There is no voting data on this thread
$100$30066% offShark Navigator Robot Vacuum with SmartPath Navigation and Self-Cleaning Brushroll $99.99 at Best Buy
2
There is no voting data on this thread
Leave a Comment
10 Comments
Sign up for a Slickdeals account to remove this ad.
Looks like you might still be able to by using a driver that Homeseer maintains: https://docs.homeseer.c
Some people report basic sensor compatibility with the generic z-wave driver. I would doubt you get access to all of the sensor data that way. Possibly just binary motion detection. Either way it's not complete or perfect plug and play.
If you find yourself frequently asking the question if it's compatible, I'd recommend looking into Home Assistant or even Hubitat... HA is compatible with all widespread home automation technologies, modern (matter, HomeKit etc), cheap (Bluetooth, WiFi) as well as older like Z-Wave and Zigbee.
Hubitat is basically the open source version of SmartThings and works with drivers written for ST.
Multisensors like this can end up sucking batteries dry very quickly if they are placed in high traffic areas and you do not (or are unable to) modify the detection or reporting frequency. Likewise battery powered multisensors are only ever active when they are reporting. Meaning the status you see is only as up to date as the last time it communicated with your hub. This is not the case with a line powered sensor that is always available and reporting current status.
Black Friday is also pretty much the only time of the year where HomeSeer products are priced competitively/worth the markup.
Multisensors like this can end up sucking batteries dry very quickly if they are placed in high traffic areas and you do not (or are unable to) modify the detection or reporting frequency. Likewise battery powered multisensors are only ever active when they are reporting. Meaning the status you see is only as up to date as the last time it communicated with your hub. This is not the case with a line powered sensor that is always available and reporting current status.
Black Friday is also pretty much the only time of the year where HomeSeer products are priced competitively/worth the markup.
Free couple CR123A batteries to boot.
https://www.thesmartest
I try to stick to powered devices everywhere. Only battery locks, and I wish I could have had an electric strike instead but that takes a lot of work if not already built into your home.
Sign up for a Slickdeals account to remove this ad.
Multisensors like this can end up sucking batteries dry very quickly if they are placed in high traffic areas and you do not (or are unable to) modify the detection or reporting frequency. Likewise battery powered multisensors are only ever active when they are reporting. Meaning the status you see is only as up to date as the last time it communicated with your hub. This is not the case with a line powered sensor that is always available and reporting current status.
Black Friday is also pretty much the only time of the year where HomeSeer products are priced competitively/worth the markup.
Not thrilled with the loop molded in to the housing - I suppose that's so the outlet cover screw can be run through the sensor to secure it to the outlet - I'll likely trim the loop off if it's easily done and confirm first that it's not really needed.
Looks like there is an active bug in HA, that doesn't let to change the color through the color picker, though you can still set it through automation.
https://github.com/home-assistant...ues/137987
Leave a Comment