Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
Missed This Deal? Get alerts when similar deals are posted.
expired
expired
kylaris 6.4K Views
Dec 4, 2025 5:14 PM

Milwaukee M18 FUEL Brushless 30 deg Framing Nailer Tool-Only 2745-20 $269.00

$269

$429

37% off
Ace Hardware
Visit Ace Hardware

Why are you downvoting this deal?

Good Deal?
25Comments
Save
Share
Deal Details
Brand Name:Milwaukee
Sub Brand: M18 FUEL
Product Type: Framing Nailer
Angle: 30 degree
Brand Name: Milwaukee
Collation Type: Paper Tape
Fastener Type: Framing Nails
Loading Type: Bottom
Maximum Fastener Size: 3.5 inch
Minimum Fastener Size: 2 inch
Model: 2745-20
Power Source: Battery Powered
Style: Brushless
Sub Brand: M18 FUEL
Warranty: 3 Year
Weight: 9.4 pound
Magazine Capacity: 51
Kit: No

I have been tracking this price for a while, and this is even cheaper than the price after homedepot hack.

https://www.acehardware.com/depar...bwEALw_wcB
Product Info
Community Notes
About the Poster
Deal Details
Product Info
Community Notes
About the Poster
Brand Name:Milwaukee
Sub Brand: M18 FUEL
Product Type: Framing Nailer
Angle: 30 degree
Brand Name: Milwaukee
Collation Type: Paper Tape
Fastener Type: Framing Nails
Loading Type: Bottom
Maximum Fastener Size: 3.5 inch
Minimum Fastener Size: 2 inch
Model: 2745-20
Power Source: Battery Powered
Style: Brushless
Sub Brand: M18 FUEL
Warranty: 3 Year
Weight: 9.4 pound
Magazine Capacity: 51
Kit: No

I have been tracking this price for a while, and this is even cheaper than the price after homedepot hack.

https://www.acehardware.com/depar...bwEALw_wcB

Community Voting

Deal Score
+9
Good Deal
Bad Deal

Why are you downvoting this deal?

Visit Ace Hardware

Community Reviews

Milwaukee's M18 FUEL 30 degree framing nailer stands out for cordless framing convenience and strong driving power. It skips the compressor and hose, hot swaps batteries, and handles quick touch ups or occasional framing well. Depth adjustment is praised, and the tool has been used successfully on sheds, basement walls, and heavy DIY work with very few jams. The main concern is the internal gas system, which is not user replaceable and can fail outside warranty, and the tool is heavy enough to cause arm fatigue during all day use. A solid cordless option if you value portability over long term simplicity.

  • The tool can be used without a compressor or hose, which makes quick touch-ups easier in rolled-up work areas.

    borodin1

  • The nailer can be switched to a 21-degree nail magazine with a small modification to the nail holder rather than modifying the gun itself.

    CarlosG7283

  • The depth adjustments are reported to be very good, which helps with dialing in nail depth during framing work.

    CaptainSoul

  • The internal gas system is described as having a limited charge life, but the tool is still reported to work well for occasional framing and for locations where dragging a hose is inconvenient.

    Blinkerbuddy

  • The internal gas cylinder is described as not rechargeable, and replacement can be expensive once it fails outside warranty.

    rKhayd

  • The internal pressurized design is criticized as planned obsolescence, and the friction-drive alternative is suggested for better long-term usability.

    sixtyfive_ford

  • The tool is reported to be heavy, which can contribute to arm fatigue during extended all-day use.

    CaptainSoul

  • The nailer is described as having a limited gas charge life, so it may not be suitable for nonstop pro framing sessions.

    Blinkerbuddy

Common Questions (5)

AI-generated summary based on comments from the community. Updated ago

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

25 Comments

Sign up for a Slickdeals account to remove this ad.

Dec 4, 2025 5:19 PM
1K Comments
Joined Jul 2013
rKhaydDec 4, 2025 5:19 PM
1K Comments

Our community has rated this post as helpful. If you agree, why not thank

It was great when it worked, but it is the only Milwaukee tool I regret buying. The gas cylinder inside is not rechargeable. So once it goes out (and it will), only Milwaukee can replace it. Mine went out outside of warranty period and Milwaukee wanted $250 to fix it. I went back to a pneumatic framing nailer, which is also considerably lighter and easier to handle.
2
1
Dec 4, 2025 5:36 PM
4 Comments
Joined Jan 2024
ZyzyzxDec 4, 2025 5:36 PM
4 Comments
Quote from rKhayd View quoted comment :
It was great when it worked, but it is the only Milwaukee tool I regret buying. The gas cylinder inside is not rechargeable. So once it goes out (and it will), only Milwaukee can replace it. Mine went out outside of warranty period and Milwaukee wanted $250 to fix it. I went back to a pneumatic framing nailer, which is also considerably lighter and easier to handle.
"No gas cartridge required"
Dec 4, 2025 5:37 PM
3 Comments
Joined May 2015
QnzkrewDec 4, 2025 5:37 PM
3 Comments
I'm sure he is not talking about that gas cartridge.
Dec 4, 2025 5:39 PM
616 Comments
Joined Jun 2013
borodin1Dec 4, 2025 5:39 PM
616 Comments
Quote from rKhayd View quoted comment :
It was great when it worked, but it is the only Milwaukee tool I regret buying. The gas cylinder inside is not rechargeable. So once it goes out (and it will), only Milwaukee can replace it. Mine went out outside of warranty period and Milwaukee wanted $250 to fix it. I went back to a pneumatic framing nailer, which is also considerably lighter and easier to handle.
Tools break, especially with everyday use. Sure, pneumatic guns are lighter and probably more reliable but it's the price you pay for the convenience. Not having to roll out a compressor and a hose and being able to hot swap batteries when needed is what this gun is all about, not lightness or ease of use. 3-year warranty on this - my framers replace their pneumatic guns after couple years of use. And they all have one of these just to be able to quickly touch something up when everything is rolled up or when dragging hoses is a PIA. Time and a place for everything. I have a gas paslode that just keeps going but I'm seriously considering this, either when it drops under $200 or when the paslode finally breaks. YMMV.
Dec 4, 2025 5:44 PM
1K Comments
Joined Jul 2013
rKhaydDec 4, 2025 5:44 PM
1K Comments
Quote from Zyzyzx View quoted comment :
"No gas cartridge required"
I mean that is correct, except it has an internal non-replaceable gas cylinder that is charged at the factory. Pretty much all non-cartridge cordless nailers use the same system.
Dec 4, 2025 5:50 PM
1K Comments
Joined Jul 2013
rKhaydDec 4, 2025 5:50 PM
1K Comments
Quote from borodin1 View quoted comment :
Tools break, especially with everyday use. Sure, pneumatic guns are lighter and probably more reliable but it's the price you pay for the convenience. Not having to roll out a compressor and a hose and being able to hot swap batteries when needed is what this gun is all about, not lightness or ease of use. 3-year warranty on this - my framers replace their pneumatic guns after couple years of use. And they all have one of these just to be able to quickly touch something up when everything is rolled up or when dragging hoses is a PIA. Time and a place for everything. I have a gas paslode that just keeps going but I'm seriously considering this, either when it drops under $200 or when the paslode finally breaks. YMMV.
You make a good point, but unfortunately, mine went out with typical DIY usage. I've probably shot less than 3k nails through it while reframing windows and putting in new sheathing/siding at my house. My suggestion is to keep using Passlode until it dies. Those things are practically immortal.
Dec 4, 2025 6:59 PM
602 Comments
Joined Aug 2008
NeverSummer07Dec 4, 2025 6:59 PM
602 Comments
Quote from rKhayd View quoted comment :
It was great when it worked, but it is the only Milwaukee tool I regret buying. The gas cylinder inside is not rechargeable. So once it goes out (and it will), only Milwaukee can replace it. Mine went out outside of warranty period and Milwaukee wanted $250 to fix it. I went back to a pneumatic framing nailer, which is also considerably lighter and easier to handle.
Good to know. I was going to pull the trigger.

Sign up for a Slickdeals account to remove this ad.

Dec 4, 2025 7:19 PM
2.6K Comments
Joined Nov 2003
BigTonyTonesDec 4, 2025 7:19 PM
2.6K Comments
So I'm confused does this have a cartridge inside or no ?
Dec 4, 2025 7:19 PM
170 Comments
Joined Nov 2018
CarlosG7283Dec 4, 2025 7:19 PM
170 Comments
Mine has been awesome. You can also switch it to the 21 degree nail mag with a little and I do mean little modification to the nail holder not the gun.
Dec 4, 2025 7:19 PM
160 Comments
Joined Jun 2011
sixtyfive_fordDec 4, 2025 7:19 PM
160 Comments
All these internal pressurized nail guns are planned obsolescence to put it frankly. I own a lot of Milwaukee tools but this is probably one I would not. I learned 20 years ago not to be silly enough to lock yourself into one brand rather I use them all. Every manufacturer seems to do it a little bit different and I know DeWalt uses a friction drive with no internal gas cylinder. That's probably the one you want if you want to pick it up in 6-10 years from now and have it work. The annoyance with the friction drive is it seems to be a little slower ramping up but still very usable. A Paslode nailer makes the gas cylinder replaceable which is probably something Milwaukee should have done. I would probably buy the Milwaukee if it was a hundred bucks cheaper than this. With the expectations of selling it in Facebook in 2 and 1/2 years while it's still working.
1
3
Dec 4, 2025 7:23 PM
119 Comments
Joined Jul 2013
citrixmonkeyDec 4, 2025 7:23 PM
119 Comments
Does this gas cylinder thing exists only in this framing nailer model only? Does it exists in other Milwaukee cordless nailers? I have the Milwaukee Brad nailer and a 15 gauge and 18 gauge Finish nailer, all cordless.
Last edited by citrixmonkey December 4, 2025 at 12:00 PM.
Dec 4, 2025 7:24 PM
7 Comments
Joined Dec 2010
BlinkerbuddyDec 4, 2025 7:24 PM
7 Comments
Quote from NeverSummer07 View quoted comment :
Good to know. I was going to pull the trigger.
Think he just got unlucky. I've had mine for about 4 years now. Professional use. I'm not a framer but I occasionally have to build walls or sister studs and mine is all l still going strong. Every battery nail gun deals with a limited life do to the gas charge so this isn't a tool for a framer to use non stop but in addition to a pneumatic for areas you don't want to drag a hose. Also great for people who do framing occasionally. Milwaukee makes the best battery nail gun aside from metabo. This is a great deal.
Dec 4, 2025 7:25 PM
1.2K Comments
Joined Oct 2006
jrbtDec 4, 2025 7:25 PM
1.2K Comments
Amazing price for new, close to what I paid refurb.

EDIT: Correction, I got the 21 degree which isn't on sale. Make sure you know what nails (21 vs 30) are readily available in your region.
Last edited by jrbt December 4, 2025 at 11:27 AM.
Dec 4, 2025 7:31 PM
51 Comments
Joined Apr 2020
Bunker22Dec 4, 2025 7:31 PM
51 Comments
There's no gas cartridge in these but it does have an air tank. There's YouTube videos on how to refill them. It's pretty simple to do.

Sign up for a Slickdeals account to remove this ad.

Dec 4, 2025 7:52 PM
299 Comments
Joined Jan 2009
arcticproDec 4, 2025 7:52 PM
299 Comments
HomeDepot price match is such a joke. Was talking to someone while I had it in my Ace hardware cart and it sold out while they took 30 minutes. Like the person was dragging time out as long as possible. Took 10 minutes to reply to ask a unnecessary follow up question that I already provided in a previous message.

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

Related Searches

Home & Home ImprovementToolsDrills & Power ToolsOccasionsBlack FridayChristmasCyber Monday