Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
Heads up, this deal has expired. Want to create a deal alert for this item?
expiredphoinix | Staff posted Dec 8, 2025 10:53 AM

6-Piece Vevor Ratcheting Pipe Tap/Die Threader Kit w/ Storage Case

$31

$48

35% off
Amazon
8.7K Views
Visit Amazon
Deal Details
Amazon has 6-Piece Vevor Ratcheting Pipe Tap/Die Threader Kit w/ Storage Case on sale for $30.98. Shipping is free w/ Prime or on $35+ orders.

Thanks to Deal Hunter phoinix for finding this deal

Note, product must be sold/shipped by Amazon

Includes
  • 6-Piece Vevor Threading Dies
    • 1/4" NPT
    • 3/8" NPT
    • 1/2" NPT
    • 3/4" NPT
    • 1" NPT
    • 1-1/4" NPT
  • Vevor Durable Handle w/ Extension Bar
  • Vevor Wrench Bracket
  • Vevor Convenient Carrying Case

Editor's Notes

Written by Discombobulated | Staff
  • Price Research
    • At the time of research, this product is $17.01 lower (35.44% savings) than the next best available price from a reputable merchant with prices ranging from $47.99.
  • About the Deal
    • This versatile pipe threading tool is designed for use with a wide range of pipes, including aluminum, iron, galvanized steel, and copper; relibile for both professional contractors/DIY projects
    • Product is eligible for the 2025 holiday season refund/replacement through January 31, 2026
    • Offer valid while promotional price/supplies last
  • Additional Details

Original Post

Written by phoinix | Staff
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Amazon has 6-Piece Vevor Ratcheting Pipe Tap/Die Threader Kit w/ Storage Case on sale for $30.98. Shipping is free w/ Prime or on $35+ orders.

Thanks to Deal Hunter phoinix for finding this deal

Note, product must be sold/shipped by Amazon

Includes
  • 6-Piece Vevor Threading Dies
    • 1/4" NPT
    • 3/8" NPT
    • 1/2" NPT
    • 3/4" NPT
    • 1" NPT
    • 1-1/4" NPT
  • Vevor Durable Handle w/ Extension Bar
  • Vevor Wrench Bracket
  • Vevor Convenient Carrying Case

Editor's Notes

Written by Discombobulated | Staff
  • Price Research
    • At the time of research, this product is $17.01 lower (35.44% savings) than the next best available price from a reputable merchant with prices ranging from $47.99.
  • About the Deal
    • This versatile pipe threading tool is designed for use with a wide range of pipes, including aluminum, iron, galvanized steel, and copper; relibile for both professional contractors/DIY projects
    • Product is eligible for the 2025 holiday season refund/replacement through January 31, 2026
    • Offer valid while promotional price/supplies last
  • Additional Details

Original Post

Written by phoinix | Staff

Community Voting

Deal Score
+26
Good Deal
Visit Amazon

Top Comments

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

9 Comments

Sign up for a Slickdeals account to remove this ad.

Dec 10, 2025 11:43 AM
214 Comments
Joined Feb 2012
miltoneyDec 10, 2025 11:43 AM
214 Comments
I have this set. Might be okay on smaller pipe sizes, but for 1-1/4 it was completely useless. Would only cut about half the necessary thread and then bind up. Couldn't get it to go any further even with a pipe on the handle for leverage.
2
Dec 10, 2025 1:24 PM
53 Comments
Joined Oct 2019
HustleCastleDec 10, 2025 1:24 PM
53 Comments

Our community has rated this post as helpful. If you agree, why not thank HustleCastle

Quote from miltoney :
I have this set. Might be okay on smaller pipe sizes, but for 1-1/4 it was completely useless. Would only cut about half the necessary thread and then bind up. Couldn't get it to go any further even with a pipe on the handle for leverage.
did you use cutting oil?
1
Dec 10, 2025 3:54 PM
362 Comments
Joined May 2010
mousemanbDec 10, 2025 3:54 PM
362 Comments
I have no experience w/ this kit, but I bought a related Vevor item recently - the thread chaser kit, to clean out the holes to install a hitch on my car. It was ok. I'd never used one before, so perhaps it was user error, but it didn't seem designed very well. The hardest part was making sure the thread chaser was perfectly straight/plumb, and there was no mechanism to assist in doing this. Seemed odd, considering the item is designed to cut into metal, and not having it straight can have bad consequences.
Dec 10, 2025 4:50 PM
2.6K Comments
Joined Feb 2005
Shock96Dec 10, 2025 4:50 PM
2.6K Comments
Thread chasers are not for cutting into metal. They are for cleaning threads.

A die is for cutting metal.
Dec 10, 2025 8:59 PM
214 Comments
Joined Feb 2012
miltoneyDec 10, 2025 8:59 PM
214 Comments
Quote from HustleCastle :
did you use cutting oil?
Yes, plenty of it.
Dec 10, 2025 9:50 PM
23 Comments
Joined Nov 2020
MaroonShow5243Dec 10, 2025 9:50 PM
23 Comments
Quote from miltoney :

Yes, plenty of it.
What technique were you using? I have a nice (rigid) set and a Chinese set likely made in the same factory as these Vevors. The Rigid set is a little sharper, but the Chinese set still works and works well with the correct technique of cut a quarter turn, back off a half turn, cut three quarter, back off a half, cut three quarter, back off, etc…
Dec 10, 2025 11:16 PM
1.3K Comments
Joined May 2015
ElectricalsushiDec 10, 2025 11:16 PM
1.3K Comments
Quote from miltoney :
I have this set. Might be okay on smaller pipe sizes, but for 1-1/4 it was completely useless. Would only cut about half the necessary thread and then bind up. Couldn't get it to go any further even with a pipe on the handle for leverage.
We have power ponys at work and you have to watch for build up on the teeth while it cuts. Backing off a few turns and starting again is common to prevent damage. Also using a heavy brush to clear chips helps. We use an oiller bucket to keep the whole piece lubricated throughout the cut.

Sign up for a Slickdeals account to remove this ad.

Dec 10, 2025 11:47 PM
214 Comments
Joined Feb 2012
miltoneyDec 10, 2025 11:47 PM
214 Comments
Quote from MaroonShow5243 :
What technique were you using? I have a nice (rigid) set and a Chinese set likely made in the same factory as these Vevors. The Rigid set is a little sharper, but the Chinese set still works and works well with the correct technique of cut a quarter turn, back off a half turn, cut three quarter, back off a half, cut three quarter, back off, etc…
I used this exact technique. I've been a CNC machinist for 18 years so I'm familiar with how to cut a thread. I also constantly drenched it with cutting oil the whole time with a bucket underneath.
Dec 11, 2025 2:58 AM
292 Comments
Joined Dec 2008
nick31Dec 11, 2025 2:58 AM
292 Comments
Rented this from Amazon for an odd job few years ago, decided to keep as performance was great for the price.
Used ATF as the cutting oil.
Back then regular price was $34.99

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

Popular Deals

Trending Deals