Discount Code: 20% off with code
HOLIDAYRUSH
Printing specs:
- Diameter:1.75±0.03mm
- Net Weight:1Kg/2.2lb
- Cross Weight:1.29Kg/2.8lb
- Package Size:210*210*70mm
- Density:1.25g/cm3
- Tensile Strength (X-Y):52.991Mpa
- Tensile Modulus(X-Y):1146.064
- Elongation at Break:6.304%
- Bending Strength (X-Y):92.381Mpa
- Flexural Modulus
X-Y):2490.178Mpa
- Charpy Impact Strength(X-Y):8.8344kJ/m2
- Printing Temperature:190-230℃
- Hot Bed Temperature:250~600
- Printing Speed:30-600mm/s
- Fan:100%
- Printing Platform: Carbon Silicon, PEI Platform Board, Textured Paper, PVP Solid Glue.
https://www.ebay.com/itm/364520612091
Leave a Comment
12 Comments
Sign up for a Slickdeals account to remove this ad.
My AMS often gets overloaded from the reels not turning properly and has to stop mid-print.
My AMS often gets overloaded from the reels not turning properly and has to stop mid-print.
My AMS often gets overloaded from the reels not turning properly and has to stop mid-print.
Sign up for a Slickdeals account to remove this ad.
https://makerworld.com/models/119...tform=cop
They DO make storage for the plastic ones too, you can print little drawers for them, but it takes up considerably more filament and time, plus you have to have space for that big of a container. I like the little ones.
Leave a Comment