Item 1 of 2
Item 1 of 2
expirediconian | Staff posted Feb 2, 2026 2:30 AM
ANYCUBIC Kobra 3 V2 Combo AE Version Multi-Color FDM 3D Printer
$199
$1,016
80% off
+ Free Shippingat AliExpress
Heads up, this deal has expired. Want to create a deal alert for this item?
+ Free Shippingat AliExpressDeal Details
This popular front-page deal is available again.
ANYCUBIC OVERSEAS Store via AliExpress has ANYCUBIC Kobra 3 V2 Combo AE Version Multi-Color FDM 3D Printer on sale for $199 when you sign-in and click the Special price alert pop-up on the page (may need to disable ad-blockers). Shipping is free.
Thanks to Deal Editor iconian for sharing this deal.
ANYCUBIC OVERSEAS Store via AliExpress has ANYCUBIC Kobra 3 V2 Combo AE Version Multi-Color FDM 3D Printer on sale for $199 when you sign-in and click the Special price alert pop-up on the page (may need to disable ad-blockers). Shipping is free.
Thanks to Deal Editor iconian for sharing this deal.
- Note:
- You must click through the link above in order to get the pop-up needed to get this sale price. You may need to turn off any ad-blockers you have if you do not see the pop-up.
- Price may fluctuate slightly with currency exchange rates. You must be signed into your AliExpress account and have your address added to add items to your cart and place an order. You may have to manually type in the promo code to apply it at checkout. This item ships from a USA warehouse. For expedited customer service, please email [email protected].
- Includes: Kobra 3 V2 3D Printer & Ace Pro Filament Dryer
- Multicolor printing: Supports 4- or 8-color via ACE Pro
- Build volume: 255 × 255 × 260 mm³
- Supported filaments: PLA, PETG, TPU (TPU not compatible with ACE Pro)
- Speed & acceleration: Recommended 300 mm/s (max 600 mm/s); recommended 10,000 mm/s² (max 20,000 mm/s²)
- Nozzle: Max 300°C, standard 0.4 mm diameter (expandable to 0.6/0.8 mm)
- Hotbed: Max 110°C, PEI spring steel plate
- Extrusion: Direct drive (short distance)
- Leveling: LeviQ3.0 auto-leveling with Z-offset
- Safety features: Power loss resume, filament detection & auto resume, filament entanglement detection, AI spaghetti detection, object-skip & area leveling
- Control methods: Printer touchscreen, slicing software, Anycubic app, USB (print only)
- Touchscreen: 4.3-inch capacitive
- Camera: Standard HD (720P) for video monitoring
- Firmware: Kobra OS
- Construction: Gantry system
- Weights: Kobra 3 V2 – 9.37 kg; ACE Pro – 4.6 kg
- Dimensions: Kobra 3 V2 – 452.9 × 504.7 × 483 mm; ACE Pro – 365.94 × 282.84 × 234.5 mm
Editor's Notes
Written by persian_mafia | Staff- At the time of this posting, our research indicates that this is $130 lower than the next best comparable online prices starting from $329.
- Offer valid for a limited time only / while supplies last.
- Please see the original post for additional details & refer to the comments below for discussion.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
This popular front-page deal is available again.
ANYCUBIC OVERSEAS Store via AliExpress has ANYCUBIC Kobra 3 V2 Combo AE Version Multi-Color FDM 3D Printer on sale for $199 when you sign-in and click the Special price alert pop-up on the page (may need to disable ad-blockers). Shipping is free.
Thanks to Deal Editor iconian for sharing this deal.
ANYCUBIC OVERSEAS Store via AliExpress has ANYCUBIC Kobra 3 V2 Combo AE Version Multi-Color FDM 3D Printer on sale for $199 when you sign-in and click the Special price alert pop-up on the page (may need to disable ad-blockers). Shipping is free.
Thanks to Deal Editor iconian for sharing this deal.
- Note:
- You must click through the link above in order to get the pop-up needed to get this sale price. You may need to turn off any ad-blockers you have if you do not see the pop-up.
- Price may fluctuate slightly with currency exchange rates. You must be signed into your AliExpress account and have your address added to add items to your cart and place an order. You may have to manually type in the promo code to apply it at checkout. This item ships from a USA warehouse. For expedited customer service, please email [email protected].
- Includes: Kobra 3 V2 3D Printer & Ace Pro Filament Dryer
- Multicolor printing: Supports 4- or 8-color via ACE Pro
- Build volume: 255 × 255 × 260 mm³
- Supported filaments: PLA, PETG, TPU (TPU not compatible with ACE Pro)
- Speed & acceleration: Recommended 300 mm/s (max 600 mm/s); recommended 10,000 mm/s² (max 20,000 mm/s²)
- Nozzle: Max 300°C, standard 0.4 mm diameter (expandable to 0.6/0.8 mm)
- Hotbed: Max 110°C, PEI spring steel plate
- Extrusion: Direct drive (short distance)
- Leveling: LeviQ3.0 auto-leveling with Z-offset
- Safety features: Power loss resume, filament detection & auto resume, filament entanglement detection, AI spaghetti detection, object-skip & area leveling
- Control methods: Printer touchscreen, slicing software, Anycubic app, USB (print only)
- Touchscreen: 4.3-inch capacitive
- Camera: Standard HD (720P) for video monitoring
- Firmware: Kobra OS
- Construction: Gantry system
- Weights: Kobra 3 V2 – 9.37 kg; ACE Pro – 4.6 kg
- Dimensions: Kobra 3 V2 – 452.9 × 504.7 × 483 mm; ACE Pro – 365.94 × 282.84 × 234.5 mm
Editor's Notes
Written by persian_mafia | Staff- At the time of this posting, our research indicates that this is $130 lower than the next best comparable online prices starting from $329.
- Offer valid for a limited time only / while supplies last.
- Please see the original post for additional details & refer to the comments below for discussion.
Community Voting
Deal Score
+293
Good Deal
Bad Deal
Found by tDames
Forum Thread
66% off
Found by minntwins
Forum Thread
50% off
Found by Izzy138
Forum Thread
54% off
Found by blue668
Forum Thread
61% off
Found by Red_Liz
Forum Thread
57% off
Found by phoinix
Forum Thread
56% off
Found by phoinix
Forum Thread
44% off
Found by Rokket
Forum Thread
49% off
Found by phoinix
Forum Thread
54% off
Top Comments
He bought a Bambu and literally just clicks "print" and hasn't had a failure yet.
I read somewhere else... buy Anycubic if you want to spend all of your time with the 3d printer, buy Bambu if you want to spend all your time with the 3d prints.
We just sold ours and upgraded to a P1S and yes it's more expensive but it's amazing the difference in experience (and lack of stress. My brother in law has the A1 or A1 mini and has had a great experience as well.
I personally just didn't have the patience to become an expert every time I wanted to print something. Was worth the upgrade for me.
Some key differences are that this printer has the ace pro unit and the Kobra X has the ace pro 2 unit and they aren't interchangeable. The Kobra X has a different filament management system that will have faster color changes and less purge waste. There are clearly other differences, but I wanted to point out that a new printer is coming (then again, isn't that always the case)?
Quality wise its not the best because its a bed slinger. You'll find much better prints quality with core xy like AD5M or AD5X
There is issue with bed adhesion, but you need to invest in BIQU cryogrip built plate, its a game changer for any 3D printer.
ACE is a plus as it dries and keeps them dry when filaments are not in use. You can print desiccant holder to keep the spools dry.
The printer is mostly assembled from the factory but make sure to tighten all the screws. Mine were slightly loose and quality greatly improved after tightening them (still nothing like a core xy)
Don't even bother to replace the nozzle, its permanently glued. Buy the cheap nozzle+hotend ceramic heater assembly and you will be much happy (on first time use, slightly coat an inch or so of the filament with mineral oil and it forms a protective nonstick layer inside the nozzle). Clogs are mostly due to bad filament quality, uneven size or moisture.
Join The Conversation
Share information with the community. Please follow our Community Guidelines and be kind!
202 Comments
Sign up for a Slickdeals account to remove this ad.
I'm sure the Bambu is easier overall but these printers are still enormously easier for 3d printing than older printers like the Ender 3. I had to manually level the bed on the Ender. It had no built in network interface so I had to set up Octoprint to manage the printer without it being right next to your computer. No filament runout sensor. No ability to print multiple colors.
$200 is a great deal for what you get here. The ACE unit is worth $200 by itself.
Our community has rated this post as helpful. If you agree, why not thank BornToBargain
Does anyone have the actual code so we can just paste at checkout manually?
Sign up for a Slickdeals account to remove this ad.
My first 3d printer was a Kobra 3v2. It seems crazy easy. I have never used the dryer. I resize, use the store, import. What is harder on the Kobra?
Sign up for a Slickdeals account to remove this ad.
Some key differences are that this printer has the ace pro unit and the Kobra X has the ace pro 2 unit and they aren't interchangeable. The Kobra X has a different filament management system that will have faster color changes and less purge waste. There are clearly other differences, but I wanted to point out that a new printer is coming (then again, isn't that always the case)?
Join The Conversation
Share information with the community. Please follow our Community Guidelines and be kind!