expired
4-Spool Sunlu Official S4 3D Printer Filament Dryer
$96
$117
17% off
+ Free Shippingat Amazon
Missed This Deal? Get alerts when similar deals are posted.
+ Free Shippingat AmazonDeal Details
SUNLU Industry via Amazon has 4-Spool Sunlu Official S4 3D Printer Filament Dryer on sale for $96.20. Shipping is free.
Thanks to Community Member pennysave for sharing this deal.
About this product:
Thanks to Community Member pennysave for sharing this deal.
About this product:
- 4 Spool Capacity: SUNLU 3D printer filament dryer S4 can dry up to four 1kg 3D printer filaments
- Is notably large in size. External size - 460 (L) x 220 (W) x 310 (H)mm, internal size - 450 (L) x 175 (W) x 207 (H)mm, net weight - 4KG
- Features eight filament outlets, ideal for multiple printers and various filament loading angles, smoother loading and printing
- Equipped with a 350W PTC heater
- Three high-quality fans circulate air inside, ensuring consistent temperature across the entire area for more even drying, 360° surround heating
- Supports a wide range of materials including PLA, PLA Plus, PLA Meta, PETG, ABS, TPU, PA, PC, Nylon, etc., compatible with 1.75mm, 2.85mm, and 3.00mm
Editor's Notes
Written by powerfuldoppler | Staff- About this Store:
- Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
- If you're not a student, there's also a free 1-Month Amazon Prime trial available.
- Additional Information:
- This offer is $1.79 less than the previous Frontpage Deal.
- Please see the original post for additional details and/or view the Wiki and forum comments for further helpful discussion if available.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
SUNLU Industry via Amazon has 4-Spool Sunlu Official S4 3D Printer Filament Dryer on sale for $96.20. Shipping is free.
Thanks to Community Member pennysave for sharing this deal.
About this product:
Thanks to Community Member pennysave for sharing this deal.
About this product:
- 4 Spool Capacity: SUNLU 3D printer filament dryer S4 can dry up to four 1kg 3D printer filaments
- Is notably large in size. External size - 460 (L) x 220 (W) x 310 (H)mm, internal size - 450 (L) x 175 (W) x 207 (H)mm, net weight - 4KG
- Features eight filament outlets, ideal for multiple printers and various filament loading angles, smoother loading and printing
- Equipped with a 350W PTC heater
- Three high-quality fans circulate air inside, ensuring consistent temperature across the entire area for more even drying, 360° surround heating
- Supports a wide range of materials including PLA, PLA Plus, PLA Meta, PETG, ABS, TPU, PA, PC, Nylon, etc., compatible with 1.75mm, 2.85mm, and 3.00mm
Editor's Notes
Written by powerfuldoppler | Staff- About this Store:
- Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
- If you're not a student, there's also a free 1-Month Amazon Prime trial available.
- Additional Information:
- This offer is $1.79 less than the previous Frontpage Deal.
- Please see the original post for additional details and/or view the Wiki and forum comments for further helpful discussion if available.
Community Voting
Deal
Score
+23
Good Deal
Bad Deal
Top Comments
Community Reviews
The Sunlu S4 is a four spool filament dryer that helps pull moisture out of PLA, PETG, and other filaments so prints come out cleaner. It has been described as quiet, and drying old spools has reduced their weight by a few grams while improving print quality. The main caveats are that one unit stopped powering on after sitting unused, the release knob feels short, and the listing may need a quick authenticity check. It is a practical drying station if you want to keep multiple rolls ready.
Common Questions (4)
It is reported to be fairly quiet, around 45 dB at about 18 inches in one measurement, versus about 49 dB for a Creality dryer. That puts it a bit quieter in practice, and it is also described as quieter than the Creality unit by ear.
Yes. Drying old PLA and PETG reportedly reduced spool weight by a few grams from absorbed moisture, and the resulting prints came out excellent. It is especially useful for moisture-prone filaments like PETG, which can develop pops and zits when wet.
That should be verified before buying, because the listing may not be the legit Sunlu page. A separate Amazon listing for the same product was pointed out as a possible alternative to confirm authenticity.
No. If PLA and PETG are in the same AMS, the dryer should be set to PLA temperatures so the PLA is not damaged by excessive heat.
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
19 Comments
Sign up for a Slickdeals account to remove this ad.
I use the S4 for standalone drying spools, and primarily for feeding external rolls that I don't want to run through the AMS (TPU and abrasives.)
Modified an AMS stand I found on Printables for it as well, sits nicely next to the X1C, with some useful Gridfinity additions.
Just keep in mind, if you have both PLA and PETG within the same AMS, you should set your dryer on PLA temps or you can ruin your PLA if temps are too high.
EDIT: I'm a moron. I thought this deal was for the AMS Heater. I do own the S4 as well and It does seem quieter than the Creality
You mean this AMS heater by Sunlu for $78?
You mean this AMS heater by Sunlu for $78?
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!