Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
Missed This Deal? Get alerts when similar deals are posted.
  1. Deal Image
Item 1 of 4
  1. Deal Image
  2. Deal Image
  3. Deal Image
  4. Deal Image
Item 1 of 4
expiredphoinix | Staff posted Feb 27, 2026 10:12 PM

Sovol SH01 3D Printer Filament Dryer (2025)

$36

$50

28% off
w/ Subscribe & Save + Free Shippingat Amazon
15 Comments
23.7K Views
Visit Amazon
Deal Details
Sovol via Amazon has Sovol SH01 3D Printer Filament Dryer (2025) for $39.89 - 10% when you check out via Subscribe & Save = $35.90. Shipping is free.

Thanks to Deal Hunter phoinix for posting this deal.
Product Description:
  • Can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased
  • Displays the humidity and temperature in the dry box in real time
  • Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm

Editor's Notes

Written by SubZero5 | Staff
  • About this deal:
    • This price is $3.07 less than the previous FP deal.
    • Please see original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
  • About this product:
    • 1-year warranty
  • About this store:

Original Post

Written by phoinix | Staff
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Sovol via Amazon has Sovol SH01 3D Printer Filament Dryer (2025) for $39.89 - 10% when you check out via Subscribe & Save = $35.90. Shipping is free.

Thanks to Deal Hunter phoinix for posting this deal.
Product Description:
  • Can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased
  • Displays the humidity and temperature in the dry box in real time
  • Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm

Editor's Notes

Written by SubZero5 | Staff
  • About this deal:
    • This price is $3.07 less than the previous FP deal.
    • Please see original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
  • About this product:
    • 1-year warranty
  • About this store:

Original Post

Written by phoinix | Staff

Community Voting

Deal Score
+32
Good Deal
Visit Amazon

Top Comments

MaroonDeer2762
18Comments
34Reputation
Please be aware: This only goes up to 50 degrees C. So only suitable for PLA. See this guide by Bambu for drying temps and times for various filaments: https://wiki.bambulab.com/en/fila...y-filament
Go to Comment

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

15 Comments

Sign up for a Slickdeals account to remove this ad.

Feb 27, 2026 10:29 PM
18 Comments
Joined Apr 2019
MaroonDeer2762Feb 27, 2026 10:29 PM
18 Comments

Our community has rated this post as helpful. If you agree, why not thank MaroonDeer2762

Please be aware: This only goes up to 50 degrees C. So only suitable for PLA. See this guide by Bambu for drying temps and times for various filaments: https://wiki.bambulab.com/en/fila...y-filament
9
1
Feb 27, 2026 11:22 PM
6 Comments
Joined Oct 2017
RUCrash74Feb 27, 2026 11:22 PM
6 Comments

Our community has rated this post as helpful. If you agree, why not thank RUCrash74

I've had this dryer for a while now... works great for me on PLA, PETG, and TPU... but if you want to do ABS or more "exotic" filaments you may want something hotter. SOVOL says it's good for ABS, but be ready to have it sit for 20+ hrs!
2
Feb 27, 2026 11:32 PM
383 Comments
Joined Mar 2013
SuperPlatoFeb 27, 2026 11:32 PM
383 Comments
Why it needs to be SnS? It breaks so frequently that we need a new one every 2 months ?
7
1
Feb 28, 2026 12:11 AM
408 Comments
Joined Nov 2008
HitchItchFeb 28, 2026 12:11 AM
408 Comments
no issues for me. I have been using mine for a year. at this price its hard to go wrong
Feb 28, 2026 12:16 AM
1.1K Comments
Joined Dec 2019
Dave_BFeb 28, 2026 12:16 AM
1.1K Comments
Quote from RUCrash74 :
I've had this dryer for a while now... works great for me on PLA, PETG, and TPU... but if you want to do ABS or more "exotic" filaments you may want something hotter. SOVOL says it's good for ABS, but be ready to have it sit for 20+ hrs!
The optimal drying temperature for drying PETG is 60-65℃, TPU is 65-75℃.
Feb 28, 2026 1:27 AM
6.3K Comments
Joined Mar 2008
redpoint5Feb 28, 2026 1:27 AM
6.3K Comments
Can sufficient drying occur by sitting for days in a sealed container with silica gel? Seems like any environment that drops humidity will pull water out.
I've got a convection oven so that'll do.
Last edited by redpoint5 February 27, 2026 at 05:40 PM.
1
Feb 28, 2026 1:44 AM
10 Comments
Joined Aug 2025
WarriorDragonIDFeb 28, 2026 1:44 AM
10 Comments
Quote from redpoint5 :
Can sufficient drying occur by sitting for days in a sealed container with silica gel? Seems like any environment that drops humidity will pull water out.I've got a convection oven so that'll do.
Silica gel will prevent any moisture from being absorbed by the filament, but it can't remove the moisture like dryers can
1

Sign up for a Slickdeals account to remove this ad.

Feb 28, 2026 1:56 AM
91 Comments
Joined Aug 2018
LaughingSomnambulistFeb 28, 2026 1:56 AM
91 Comments
Quote from Dave_B :
The optimal drying temperature for drying PETG is 60-65℃, TPU is 65-75℃.
Optimal, yes, but 50C will still work for PETG -- it just takes longer. 50C is enough energy to free most of the trapped and adsorbed water on PETG, but less effective for TPU in my experience. I have had good experience with this dryer with my PETG, the new high flow PETG, PETG-GF, and PTEG-CF. I havent noticed a difference over 10+ rolls between this dryer and my food dehydrator at 65C, but the benefit is I can print directly from the dryer while drying.

I traded an unloved PETG spool from a friend and drove off enough moisture to condense on the inside after an hour. It went all the way down to ~10% after drying overnight.
Feb 28, 2026 2:05 AM
91 Comments
Joined Aug 2018
LaughingSomnambulistFeb 28, 2026 2:05 AM
91 Comments

Our community has rated this post as helpful. If you agree, why not thank LaughingSomnambulist

Quote from redpoint5 :
Can sufficient drying occur by sitting for days in a sealed container with silica gel? Seems like any environment that drops humidity will pull water out.
I've got a convection oven so that'll do.
No, you still need energy to break free/release the water that is adsorbed on the surface or trapped in the spaces between the polymer chains. Just 0% humidity is not enough to release enough trapped/bonded water for 3D printing plastics.
Last edited by LaughingSomnambulist February 27, 2026 at 06:13 PM.
3
Feb 28, 2026 6:08 AM
267 Comments
Joined Jul 2008
g33kazoidFeb 28, 2026 6:08 AM
267 Comments
I have one of these. I use it to dry PLA filament and silica gel packs. It works for these purposes and it's easy to use but it's not perfect. You need to leave the hood cracked open a little so the moisture can escape when drying. The o-ring seal doesn't seal perfectly tight, so I don't store filament in it. The bottom of mine gets VERY hot when set to the 50C setting; it's hot enough that it's uncomfortable to leave my fingers there for very long. I 3d printed a stand i found somewhere online someone had made for this unit to lift the whole dryer about an inch to allow airflow underneath. I used hot glue to attached the stand to the bottom. That is the biggest issue I have with the dryer. It also doesn't heat the whole chamber that evenly so i typically rotate my rolls of filament during drying. The bottom of the chamber seems to get the hottest, so I'm not sure what the little fan is actually doing. I do like the large chamber for two rolls of filament.
1
Feb 28, 2026 2:44 PM
18 Comments
Joined Oct 2022
PurpleGoat932Feb 28, 2026 2:44 PM
18 Comments
This is 2$ off the historically normal price
Feb 28, 2026 8:17 PM
1K Comments
Joined May 2016
omar10wahabFeb 28, 2026 8:17 PM
1K Comments
Quote from MaroonDeer2762 :
Please be aware: This only goes up to 50 degrees C. So only suitable for PLA. See this guide by Bambu for drying temps and times for various filaments: https://wiki.bambulab.com/en/fila...y-filament
Why is your link a tracking link?
Mar 1, 2026 12:14 AM
107 Comments
Joined Dec 2016
SomeTechNoobMar 1, 2026 12:14 AM
107 Comments
i bought one listed as used last year for 30 bucks and it came in brand new. 50c limit is true but otherwise works pretty well and is a nice size and simple to use
Mar 1, 2026 11:21 PM
138 Comments
Joined May 2011
gregcainMar 1, 2026 11:21 PM
138 Comments
I bought this one, had it for about a year and it died. Three Stars. Bought another filament dryer with only one slot - a lot louder, so I'm back to this one again. Still 3 stars, but being quiet changed my mind.
2

Sign up for a Slickdeals account to remove this ad.

Mar 2, 2026 11:30 AM
1.1K Comments
Joined Dec 2019
Dave_BMar 2, 2026 11:30 AM
1.1K Comments
Quote from omar10wahab :
Why is your link a tracking link?
Because Slickdeals automatically adds tracking to links posted.

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

Related Searches

ComputersPrinters3D PrintersAmazon