ECO-WORTHY 5.12kWh 48V Home Backup Power System 5kW Inverter + 100Ah Battery Final Price $993 + Free Shipping
ECO-WORTHY Store via AliExpress. Ship from US warehouse.
Apply coupon
USDEA100 for $100 off at checkout
Final Price: $992.90
Key Specs:
- Battery Capacity: 51.2V 100Ah, 5.12kWh (5120Wh).
- Battery Chemistry & Life: Grade A LiFePO4 cells, 6000+ cycles, 10-year lifespan.
- Inverter Power: 5000W pure sine wave output, 99% peak efficiency.
- Inverter Input: 450VDC MPPT, supports up to 6500W solar input.
- Physical Specs: Unit weight approx. 97 lbs (44kg), compact metal case.
- Charging Modes: 4 modes (Solar, Utility, Generator, Hybrid).
- Monitoring: LCD display for real-time system status (voltage, power, etc.).
- Warranty & Service: Backed by 5-year warranty, 17+ year solar specialist.
https://www.aliexpress.com/item/1005011560412601.html [aliexpress.us]
Community Reviews
This ECO-WORTHY setup is a 5.12 kWh, 48V backup system aimed at keeping critical loads running, especially lights, fridge, Internet, and a well pump. The inverter is described as supporting 240V split phase input and output, with installation typically handled through a transfer switch, interlock kit, or hardwire to a 50 amp breaker. The main limitation is runtime, since the battery is framed as short duration for heavier household loads and not suited to hot water heaters, dryers, or air conditioning for long. There is also concern that the inverter may only output 120V unless units are paired in parallel, so the voltage setup needs careful checking.
Common Questions (5)
It is better suited for critical circuits than whole-house loads. The 5kW inverter and 5.12kWh battery can handle lights, fridge, internet, and similar loads, but AC, dryer, stove, and water heater will drain it quickly or exceed its capacity.
Runtime depends heavily on load, but several comments estimate only a few hours for many homes. Light loads can stretch it to hours, while heavier everyday loads can cut that down fast; one estimate puts it around three hours for a lot of people.
Yes. A transfer switch box or breaker-panel interlock is the safer way to connect it, because you need a proper way to isolate the house from the grid during outage operation. The inverter can be wired through a 50A transfer switch box or directly to a double breaker if the setup is done correctly.
Yes, it has been used as a UPS for a well pump and is described as supporting 240V split-phase output. One practical note is that some setups needed a grid-breaker reset when the unit got stuck in bypass mode, and a soft start may help with pump starting loads.
Yes. The system supports both 240V split-phase input and output, with L1 and L2 each providing 120V plus neutral and ground. It can be wired to a 50A double breaker, transfer switch box, or hardwired to the panel.
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
38 Comments
Sign up for a Slickdeals account to remove this ad.
Sign up for a Slickdeals account to remove this ad.
L1 = 120V
L2 = 120V
N = NEUTRAL
PE = GROUND
The output voltage of one inverter is 120v, and more than two inverters can output 120v/208v/240v in parallel. (Two units MINIMUM have to be in parallel to achieve 220V power.)
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!