Select Costco Wholesale Stores (link for reference only) have for
Members: 32" Dell S3225QC Plus 4K QD-OLED 120Hz FreeSync Premium Pro Monitor (Item 2009952) on sale for
$349.97 (In-Store Only).
Thanks to community member
Totspurs for finding this deal
Note: Availability/price may vary by location
Specs: - Resolution: 3840 x 2160
- Refresh Rate: 120Hz
- Panel Type: Quantum Dot OLED
- Response Time: 0.03ms gray-to-gray
- Contrast Ratio: 1,500,000:1 (native)
- AMD FreeSync Premium Pro
- Ports:
- 1x HDMI port (HDCP 1.4 and 2.2) (Supports up to UHD 3840 x 2160 120 Hz, FRL, HDR, VRR as per specified in HDMI 2.1)
- USB port
- 2x USB-C 5Gbps downstream ports (Data only, Power Delivery up to 15 W)
- 1x USB-C 5Gbps upstream port (DisplayPort 1.4 Alt Mode, Power Delivery up to 90 W)
Leave a Comment
Top Comments
215 Comments
Sign up for a Slickdeals account to remove this ad.
Google search it, my chrome browser shows me $329.99 with free shipping after i put it in my cart, from Dell direct.
This is what i put in and it popped up on the right side. I tried to put a link but it goes to a dead screen>
" Dell 32 Plus 4K Monitor - S3225QS "
Our community has rated this post as helpful. If you agree, why not thank xtp
Google search it, my chrome browser shows me $329.99 with free shipping after i put it in my cart, from Dell direct.
This is what i put in and it popped up on the right side. I tried to put a link but it goes to a dead screen>
" Dell 32 Plus 4K Monitor - S3225QS "
QC, is the oled, it's $800 on dell.
Different monitors.
32 Inch 2560x1440 240hz VA LCDs cost around $350.
I'd rather have 32 inch 3840x2160 120hz QD-OLED, not just any oled, QD, this blows LG RGBW out of the water. Amazing colors, shit you've never seen.
There's a reason for it. It's frankly an amazing soundbar for what it is, and NOTHING $350 has it.
This was what AI told me. I just want to check with other folks that might have already updated their firmware.
Edit:
All right, I just updated my firmware. So if you don't have a GPU or motherboard with a USBC DP, connect the included USBC cable from the monitors USBC DP port (not the data only port with the orange plug) to your PC's motherboards usbc port, then run the HDMI 2.1 connection to your GPU. The safest way is to run Dell peripheral manager. It'll Auto detect your monitor and grab the correct firmware. Make sure you turn off virus protection because it's going to try to access the camera on the the spatial speakers and your antivirus may block it.
I searched for official firmware update instructions from Dell but they don't actually have it. The link just goes to a document that no longer exist. But I was able to successfully update mine this way.
Sign up for a Slickdeals account to remove this ad.
This was what AI told me. I just want to check with other folks that might have already updated their firmware.
The bottom bezel has 5 speaker drivers, infrared LEDs and a sensor to SPY ON YOU for spatial audio.
There's a reason for it. It's frankly an amazing soundbar for what it is, and NOTHING $350 has it.
There's a reason for it. It's frankly an amazing soundbar for what it is, and NOTHING $350 has it.
https://www.dell.com/support/prod...es/manuals
Good luck!
Jon
Sign up for a Slickdeals account to remove this ad.
Good luck!
Jon
Leave a Comment