Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
Missed This Deal? Get alerts when similar deals are posted.
expired
expired
Glennc29a 28.4K Views
Apr 29, 2026 2:31 PM

1kg 1.75mm Creality Hyper High Speed PLA 3D Printer Filament (Various Colors)

10 for $91.10

$190

+ Free S&Hat eBay
Visit eBay

Why are you downvoting this deal?

Good Deal?
27Comments
Save
Share
Deal Details
creality-official-store via eBay has 1kg 1.75mm Creality Hyper High Speed PLA 3D Printer Filament (Various Colors) on sale for 10 for $91.12 when you follow the steps below. Shipping is free.

Thanks to Community Member Glennc29a for sharing this deal.

Deal Instructions:
  1. Visit the 1kg Creality Hyper High Speed PLA 1.75mm 3D Printer Filament product page.
  2. Choose your desired color(s) from the dropdown and add a total of 10 rolls to your cart.
    • Note: Mix & match is allowed.
  3. The "Buy 6 Get 4 Free" discount will apply automatically.
  4. Apply coupon codes HYPERPLA and SMARTWINS at checkout.
  5. Final price should be 10 for $91.12. Shipping is free.
Product Details:
  • 1kg per spool
  • 1.75mm
  • Designed for High-Speed Printing (30–600mm/s)
  • Smooth extrusion & consistent quality
  • Ideal for detailed prints and rapid prototyping

Editor's Notes

Written by Nate650 | Staff
  • About this deal:
    • Our research indicates that this deal is $88.78 less (49.3% savings) than the next best available price from a reputable merchant with prices starting from $179.90 when purchased separately at the time of this post.
  • About this product:
  • About this store:
  • Additional notes:
    • Please see the original post for additional details & give the wiki and additional forum comments a read for helpful discussion.

Original Post

Written by Glennc29a
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
creality-official-store via eBay has 1kg 1.75mm Creality Hyper High Speed PLA 3D Printer Filament (Various Colors) on sale for 10 for $91.12 when you follow the steps below. Shipping is free.

Thanks to Community Member Glennc29a for sharing this deal.

Deal Instructions:
  1. Visit the 1kg Creality Hyper High Speed PLA 1.75mm 3D Printer Filament product page.
  2. Choose your desired color(s) from the dropdown and add a total of 10 rolls to your cart.
    • Note: Mix & match is allowed.
  3. The "Buy 6 Get 4 Free" discount will apply automatically.
  4. Apply coupon codes HYPERPLA and SMARTWINS at checkout.
  5. Final price should be 10 for $91.12. Shipping is free.
Product Details:
  • 1kg per spool
  • 1.75mm
  • Designed for High-Speed Printing (30–600mm/s)
  • Smooth extrusion & consistent quality
  • Ideal for detailed prints and rapid prototyping

Editor's Notes

Written by Nate650 | Staff
  • About this deal:
    • Our research indicates that this deal is $88.78 less (49.3% savings) than the next best available price from a reputable merchant with prices starting from $179.90 when purchased separately at the time of this post.
  • About this product:
  • About this store:
  • Additional notes:
    • Please see the original post for additional details & give the wiki and additional forum comments a read for helpful discussion.

Original Post

Written by Glennc29a

Community Voting

Deal Score
+76
Good Deal
Bad Deal

Why are you downvoting this deal?

Visit eBay

Community Reviews

Creality Hyper High Speed PLA is coming through as a fast, reliable everyday filament with strong print results and easy color selection in the 10 roll bundle. It has been used through multiple spools without calibration issues, and the filament itself is described as working very well. The main caveat is the cardboard spool, which can be a problem in CFS or other multi color boxes because of warping and dust. Checkout also took some fiddling, since coupon stacking and payment method choices affected whether the full discount applied.

Common Questions (5)

AI-generated summary based on comments from the community. Updated ago

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

27 Comments

Sign up for a Slickdeals account to remove this ad.

Apr 29, 2026 3:59 PM
73 Comments
Joined Nov 2018
rugz31Apr 29, 2026 3:59 PM
73 Comments
if this deal works, it's a pretty great deal on some great filament. i've used a few spools, have never had any issues even printing before running any calibrations.
Apr 29, 2026 8:58 PM
103 Comments
Joined Mar 2018
GettygasgApr 29, 2026 8:58 PM
103 Comments
Thank you just ordered
10 items $189.90 Item discount -$75.96 Shipping Free
Coupons -$22.81 Tax*$6.81 Order total $97.94
Apr 30, 2026 12:15 AM
11 Comments
Joined Nov 2016
DANGITHIENApr 30, 2026 12:15 AM
11 Comments
They disabled code stacking, only 1 coupon code at a time.
Edit: Nm, I disabled one of the codes and they both went into effect. Total with tax was 98.03
Apr 30, 2026 2:15 AM
1.1K Comments
Joined Aug 2009
Bizkit64Apr 30, 2026 2:15 AM
1.1K Comments
Awesome, I just got my printer this week. Thanks! Ordered an assortment to get started! $99.13 after tax.
Apr 30, 2026 1:30 PM
5 Comments
Joined Apr 2026
VioletWinter8239Apr 30, 2026 1:30 PM
5 Comments
Quote from Gettygasg View quoted comment :
Thank you just ordered
10 items $189.90 Item discount -$75.96 Shipping Free
Coupons -$22.81 Tax*$6.81 Order total $97.94
Same results for me.
Apr 30, 2026 10:04 PM
61 Comments
Joined May 2008
fmorris72Apr 30, 2026 10:04 PM
61 Comments
Great deal! If I didn't already have way too many rolls I'd be in for one.
2
Apr 30, 2026 10:52 PM
166 Comments
Joined Sep 2010
thinkthisApr 30, 2026 10:52 PM
166 Comments
Quote from fmorris72 View quoted comment :
Great deal! If I didn't already have way too many rolls I'd be in for one.
I don't get it. Please explain "too many roll". This makes no sense.
12

Sign up for a Slickdeals account to remove this ad.

May 1, 2026 12:07 AM
48 Comments
Joined Mar 2026
SmilingShape376May 1, 2026 12:07 AM
48 Comments
Good deal
May 1, 2026 12:23 AM
97 Comments
Joined Mar 2007
ejpMay 1, 2026 12:23 AM
97 Comments
I would avoid these cardboard spools if you have a CFS. Even Creality recommends against using these in their CFS: "Filaments with paper spools are not recommended for use in CFS or other multi-color boxes." The way they package it often warps the cardboard, which could cause trouble as the CFS tries to roll it. The cardboard could also slowly degrade as it rolls, causing cardboard dust to accumulate in the CFS and can potentially take a ride on your filament all the way to the hot end.

I got in on this deal before I got a CFS, and now that I have one, I regret it a bit. Admittedly, I have not personally tried a cardboard spool in my CFS, but I've seen enough horror stories to not even try. Or you can get/print replacement plastic spools, which is what I do, but it's just one more thing to worry about.
May 1, 2026 2:42 AM
1K Comments
Joined Apr 2015
FNwozMay 1, 2026 2:42 AM
1K Comments
I went with these rolls instead and got 10 rolls for $83 bucks or so. Also no cardboard spools on these. Filament is OK. Nothing special but at $8.30 per roll and the ability to pick out colors, it was easy to get to 10 rolls.

https://www.ebay.com/itm/37491603...4891939753
2
May 1, 2026 2:45 AM
202 Comments
Joined Mar 2011
damwakeMay 1, 2026 2:45 AM
202 Comments
Quote from ejp View quoted comment :
I would avoid these cardboard spools if you have a CFS. Even Creality recommends against using these in their CFS: "Filaments with paper spools are not recommended for use in CFS or other multi-color boxes." The way they package it often warps the cardboard, which could cause trouble as the CFS tries to roll it. The cardboard could also slowly degrade as it rolls, causing cardboard dust to accumulate in the CFS and can potentially take a ride on your filament all the way to the hot end.

I got in on this deal before I got a CFS, and now that I have one, I regret it a bit. Admittedly, I have not personally tried a cardboard spool in my CFS, but I've seen enough horror stories to not even try. Or you can get/print replacement plastic spools, which is what I do, but it's just one more thing to worry about.
I had the same problem, and I also really like this filament so I ended up making two separate fixes for this for when I end up finding deals on the cardboard rolls.

1. A replacement spool specifically designed for Hyper PLA cardboard. You just rip one side off, insert this then rip the other side off and screw it in. https://www.crealitycloud.com/mod...-cardboard
2. A lightly knurled adapter ring, also designed specifically for this spool. https://www.crealitycloud.com/mod...urled-edge
May 1, 2026 3:53 AM
19 Comments
Joined Feb 2015
FrugalSlickdealerMay 1, 2026 3:53 AM
19 Comments
Quote from FNwoz View quoted comment :
I went with these rolls instead and got 10 rolls for $83 bucks or so. Also no cardboard spools on these. Filament is OK. Nothing special but at $8.30 per roll and the ability to pick out colors, it was easy to get to 10 rolls.

https://www.ebay.com/itm/37491603...4891939753
I don't know about you but I had terrible experiences with Soleyin filament. I got few rolls on sale from Amazon and they have been mostly headache. I love the matte, pastel colors but these blasted things refuse to stick to build plates. I tried it on my k1 max with both glacial and frostbite plates (among others). 1/2 of the time I get spaghetti at some point.

I also tried it with Snapmaker and the purple I had refused to stick to my rather large dragon in 1/2 of places. Lucky it was just an accent color so I was able to salvage it but I get annoyed every time I look at the dragon. I'll ride the roll out on "no ams" models but never again unless someone is giving it away. Then maybe.

Ended up purchasing 10 rolls of hyper in the post. I had good experiences with a roll of white that came with my k1 max and cardboard spools do not bother the U1.
May 1, 2026 3:57 AM
1K Comments
Joined Apr 2015
FNwozMay 1, 2026 3:57 AM
1K Comments
Quote from FrugalSlickdealer View quoted comment :
I don't know about you but I had terrible experiences with Soleyin filament. I got few rolls on sale from Amazon and they have been mostly headache. I love the matte, pastel colors but these blasted things refuse to stick to build plates. I tried it on my k1 max with both glacial and frostbite plates (among others). 1/2 of the time I get spaghetti at some point. I also tried it with Snapmaker and the purple I had refused to stick to my rather large dragon in 1/2 of places. Lucky it was just an accent color so I was able to salvage it but I get annoyed every time I look at the dragon. I'll ride the roll out on "no ams" models but never again unless someone is giving it away. Then maybe. Ended up purchasing 10 rolls of hyper in the post. I had good experiences with a roll of white that came with my k1 max and cardboard spools do not bother the U1.
I have had a few rolls no issues. Cheaper is better for me. I don't care which spool either running A1 with AMS now but want the U1 soon. I am not that concerned at 8.30 a roll.
May 1, 2026 4:18 AM
19 Comments
Joined Feb 2015
FrugalSlickdealerMay 1, 2026 4:18 AM
19 Comments
Quote from FNwoz View quoted comment :
I have had a few rolls no issues. Cheaper is better for me. I don't care which spool either running A1 with AMS now but want the U1 soon. I am not that concerned at 8.30 a roll.
Maybe just my luck. Glad to hear it's working for you. U1 is awesome, you wouldn't be disappointed.

Sign up for a Slickdeals account to remove this ad.

May 1, 2026 6:44 AM
2.5K Comments
Joined Jul 2010
tshrimpMay 1, 2026 6:44 AM
2.5K Comments
Cardboard spools....noooooooo!
1
1

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

Related Searches

ComputersPrinters3D PrintersFree ShippingHobbiesArts & CraftsCreality