Item 1 of 2
Item 1 of 2
populargabe23111 posted May 13, 2026 1:48 PM
Deal Details
At Elegoo US Store
Apply coupon IMECF in cart to bring the price to $119.99.
Per their promotion page [elegoo.com] this expires 5/17.I've gone through a lot of rolls of their PLA-CF. It prints as easily as standard PLA, but I'd advise ensuring you have a hardened steel nozzle.
Apply coupon IMECF in cart to bring the price to $119.99.
Per their promotion page [elegoo.com] this expires 5/17.I've gone through a lot of rolls of their PLA-CF. It prints as easily as standard PLA, but I'd advise ensuring you have a hardened steel nozzle.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
At Elegoo US Store
Apply coupon IMECF in cart to bring the price to $119.99.
Per their promotion page [elegoo.com] this expires 5/17.I've gone through a lot of rolls of their PLA-CF. It prints as easily as standard PLA, but I'd advise ensuring you have a hardened steel nozzle.
Apply coupon IMECF in cart to bring the price to $119.99.
Per their promotion page [elegoo.com] this expires 5/17.I've gone through a lot of rolls of their PLA-CF. It prints as easily as standard PLA, but I'd advise ensuring you have a hardened steel nozzle.
Community Voting
Deal Score
+13
Good Deal
Bad Deal
Found by phoinix
Forum Thread
75% off
Found by SickerDealer
Forum Thread
55% off
Found by iconian
Forum Thread
31% off
Found by UniqueWriter5055
Forum Thread
78% off
Found by neomatrixviper
Forum Thread
Found by pennysave
Forum Thread
7% off
Found by suihuamo
Forum Thread
79% off
Found by LolaBunny21
Forum Thread
51% off
Found by phoinix
Forum Thread
54% off
Join The Conversation
Share information with the community. Please follow our Community Guidelines and be kind!
25 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank gobblygook
PLA-CF is hot garbage. PLA sticks to itself, but doesn't stick to a lot of other things. The CF bits can separate from the PLA in the nozzle and cause partial clogs that may not manifest immediately. I've used pla-cf, got my print completed, switched to other filaments, printed successfully, and then started having partial nozzle clogs. I've had it happen with multiple nozzles.
After fixing the partial clogs, I've not used PLA-CF since and haven't seen a partial clog either.
While it can be argued that there could have been external factors, I'm not touching the stuff again.
PLA-CF is hot garbage. PLA sticks to itself, but doesn't stick to a lot of other things. The CF bits can separate from the PLA in the nozzle and cause partial clogs that may not manifest immediately. I've used pla-cf, got my print completed, switched to other filaments, printed successfully, and then started having partial nozzle clogs. I've had it happen with multiple nozzles.
After fixing the partial clogs, I've not used PLA-CF since and haven't seen a partial clog either.
While it can be argued that there could have been external factors, I'm not touching the stuff again.
Sign up for a Slickdeals account to remove this ad.
i use some from Eryone and man does it make some very VERY pretty smooth parts... they really do look like they came out of a mold. i use it for things like foam dart blasters, makes a fantastic looking finish for the gun parts.
PLA-CF is hot garbage. PLA sticks to itself, but doesn't stick to a lot of other things. The CF bits can separate from the PLA in the nozzle and cause partial clogs that may not manifest immediately. I've used pla-cf, got my print completed, switched to other filaments, printed successfully, and then started having partial nozzle clogs. I've had it happen with multiple nozzles.
After fixing the partial clogs, I've not used PLA-CF since and haven't seen a partial clog either.
While it can be argued that there could have been external factors, I'm not touching the stuff again.
what vendor are you using?
glow in the dark filament on the other hand... man glow in the dark stuff is cool, god i hate the clogs
Our community has rated this post as helpful. If you agree, why not thank VioletFruit436
The fibers don't stay embedded in the plastic, and can come loose, either becoming microscopic splinters, or could get airborne and inhaled.
There are some very informative YouTube videos with guys who have looked at CF 3D prints under an electron microscope, illustrating how easily the carbon fibers can detach from the plastic.
Not worth it at any price.
PLA-CF is hot garbage. PLA sticks to itself, but doesn't stick to a lot of other things. The CF bits can separate from the PLA in the nozzle and cause partial clogs that may not manifest immediately. I've used pla-cf, got my print completed, switched to other filaments, printed successfully, and then started having partial nozzle clogs. I've had it happen with multiple nozzles.
After fixing the partial clogs, I've not used PLA-CF since and haven't seen a partial clog either.
While it can be argued that there could have been external factors, I'm not touching the stuff again.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share information with the community. Please follow our Community Guidelines and be kind!