Monoprice has
15" Monoprice SW-15 600W RMS (800W Peak) Powered Subwoofer (41499) on sale for $499.99 - 50% with promo code
SHOP50 in cart =
$249.99.
Shipping is free.
Thanks to Community Member
vid1900 for sharing this deal.
Details:
- 15" front-firing powered subwoofer
- 600W RMS (800W peak) amplifier
- Ported design with down-firing port
- 30-150 Hz frequency response
- Variable phase control
- Variable low pass filter
- Dimensions: 18.1" x 21.0" x 22.7" (460 x 533 x 577 mm)
- Weight: 66.1 lbs. (30.0 kg)
Top Comments
https://www.audioholics
Community Reviews
The Monoprice SW-15 is a budget 15-inch subwoofer that stands out for sheer output and deep bass for the money. Audioholics measurements are cited as showing strong performance well below the listed 30 to 150 hertz spec, with around 107 dB at 30 hertz and 98 dB at 20 hertz. It is also described as a solid fit for movies and capable with music, especially in larger rooms or with a soundbar sub mod. The main caution is reliability and support, since the plate amp has failed for some after about a year or two, and Monoprice service is not as hands-on as smaller subwoofer brands.
Music listeners pairing it with room correction and DSP, because its bass response can be tuned in-room and it can blend well when measured properly.
Home theater fans wanting the most bass per dollar, because it can reach strong output into the 20 Hz range and still move a lot of air for movies.
Owners of bookshelf or small stand-mount speakers, because the larger driver and amp can cover the 50-150 Hz range where smaller speakers need help.
Soundbar owners adding a separate bass module, because the high-level inputs make it a workable sub mod upgrade.
Listeners who want a subwoofer that is known for great music performance, because it is not widely regarded as a standout music sub.
Buyers who want long-term reliability, because the plate amp can fail after about a year or two and replacement may cost more than a new sub.
People comparing against a slightly pricier alternative with better warranty and build quality, because that competing option is often described as the safer buy for a little more money.
Shoppers who expect strong manufacturer support after an amplifier problem, because service can require shipping back the whole sub instead of getting a replacement amp.
Common Questions (4)
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
72 Comments
Sign up for a Slickdeals account to remove this ad.
https://vintagetechnolo
Had solid oak plywood built by my brother for the cabinets.
WHAM and an unknown jazz group I used for demos.
https://www.youtube.com/watch?v=C8xt5BG
I like WHAM and Boy George.
Just play a pure 30hrz tone, make sure your sub is not distorting harmonically (or it will at extra sound at frequencies that are the harmonic multiple of the intended tone) also make sure there is no Doppler distortion from very high excursions or that will also be audible.
30hrz is mainly presented as a vibration/sense of air pressure & definitely below that is stuff you feel and do not hear - but it will vibrate things in the room including the walls making those things produce sound at higher frequencies that you hear.
You can measure your sub with REW and a cheap mic as well to mess around a bit more with the situation.
Anyway I'm not saying to not use subs or something like that, I use several subs.
The scientific jargon here really only applies to measurements, not perceptual experience.
Your book shelf + that 1 book, just the right size, could have a 20db vibration, you'd never pick it out in real content. Even most people's ceiling insulation makes ruffling noises.
The 'jargon' I used explains why the sound does change when the woofer starts to distort heavily & that it is audible.
Nobody said a 20db vibration from a book is audible when you are rocking out or that that is an issue.
That's just not true. I'm in my mid-30's and my $700 Klipsch RP-1400 slams at 20hz. S'not just "cabinet vibrations," that sum bih will pressurize my living room at a subterranean frequency
I said anything you hear as a sound that accompanies the 30hrz tone is not actually the 30hrz tone.
What you described is pretty much what I said. What is the issue here?
I design speakers.
Are missing! Odd!
Not trying to blather about myself, I stated that mainly so you understood I have tried a lot things out.
Yes, I have those things. Any design work I do is based on measurements. If I win the lottery I am going to buy a KNFS. Unfortunately I basically never buy lottery tickets but dare to dream.
Sign up for a Slickdeals account to remove this ad.
Using the CEA-2010 rules Audioholics measured a maxium SPL of 117.5db at 63 hrz & then it is about -10db down at 30hrz, matching the spec published.
It is still able to output 107db at 30hrz and 98db at 20hrz.
This is extremely good for a sub that right now is $250.
Speedwoofer 10e
Lol. If its really linear for music, it can't be meant for it? Because it also good for home theater?
I know its not $250 but can be had at $299ish or blemish for less with a better warranty and build quality.
It's been reviewed by many, just seconds on Google will confirm its musicality.
I won't argue to it being an end all of subs and the Monoprice in this thread is still a lot of SPL for the $ and a great value also.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!