Monoprice has
15" Monoprice SW-15 600W RMS (800W Peak) Powered Subwoofer (41499) on sale for $499.99 - 50% with promo code
SHOP50 in cart =
$249.99.
Shipping is free.
Thanks to Community Member
vid1900 for sharing this deal.
Details:
- 15" front-firing powered subwoofer
- 600W RMS (800W peak) amplifier
- Ported design with down-firing port
- 30-150 Hz frequency response
- Variable phase control
- Variable low pass filter
- Dimensions: 18.1" x 21.0" x 22.7" (460 x 533 x 577 mm)
- Weight: 66.1 lbs. (30.0 kg)
Top Comments
https://www.audioholics
Community Reviews
The SW-15 is a big, budget home theater sub that is praised for strong output and surprisingly deep bass for the money. Audioholics measurements are cited as showing about 117.5 dB at 63 Hz, around 107 dB at 30 Hz, and roughly 98 dB at 20 Hz, with reports that it can pressurize a medium living room and work well for music and movies. The main cautions are reliability and support, with amp failures and dead units reported around the one to two year mark, and some pointing to better warranty or service from RSL and Dayton alternatives.
Common Questions (5)
At $250, the SW-15 is described as a lot of SPL for the money and a strong entry-level option. The RSL Speedwoofer 10E/10S is repeatedly framed as the better-built alternative with stronger warranty/support, but it costs more, around $315 for the 10E or about $399 for the 10S sale target.
It can play both music and movies, and several comments say it has enough output to work well in either role at this price. For best music results, the thread emphasizes room correction, PEQ/DSP, and proper crossover setup; without that, bass integration can suffer.
There are reports of plate-amp failures after about one to two years, including units dying just after the one-year warranty. One comment also notes Monoprice may require returning the whole sub for amp issues, unlike some specialist brands that ship replacement amps.
The published 30-150 Hz (-10 dB) spec is disputed by measurements cited in the thread. Audioholics CEA-2010 results are referenced as showing about 107 dB at 30 Hz and 98 dB at 20 Hz, with one comment claiming the SW-15 measures down to roughly 15 Hz.
Yes. The SW-15 has high-level inputs, and one comment specifically recommends it as a decent upgrade for a soundbar setup using a "sub mod."
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
72 Comments
Sign up for a Slickdeals account to remove this ad.
https://vintagetechnolo
Had solid oak plywood built by my brother for the cabinets.
WHAM and an unknown jazz group I used for demos.
https://www.youtube.com/watch?v=C8xt5BG
I like WHAM and Boy George.
Just play a pure 30hrz tone, make sure your sub is not distorting harmonically (or it will at extra sound at frequencies that are the harmonic multiple of the intended tone) also make sure there is no Doppler distortion from very high excursions or that will also be audible.
30hrz is mainly presented as a vibration/sense of air pressure & definitely below that is stuff you feel and do not hear - but it will vibrate things in the room including the walls making those things produce sound at higher frequencies that you hear.
You can measure your sub with REW and a cheap mic as well to mess around a bit more with the situation.
Anyway I'm not saying to not use subs or something like that, I use several subs.
The scientific jargon here really only applies to measurements, not perceptual experience.
Your book shelf + that 1 book, just the right size, could have a 20db vibration, you'd never pick it out in real content. Even most people's ceiling insulation makes ruffling noises.
The 'jargon' I used explains why the sound does change when the woofer starts to distort heavily & that it is audible.
Nobody said a 20db vibration from a book is audible when you are rocking out or that that is an issue.
That's just not true. I'm in my mid-30's and my $700 Klipsch RP-1400 slams at 20hz. S'not just "cabinet vibrations," that sum bih will pressurize my living room at a subterranean frequency
I said anything you hear as a sound that accompanies the 30hrz tone is not actually the 30hrz tone.
What you described is pretty much what I said. What is the issue here?
I design speakers.
Are missing! Odd!
Not trying to blather about myself, I stated that mainly so you understood I have tried a lot things out.
Yes, I have those things. Any design work I do is based on measurements. If I win the lottery I am going to buy a KNFS. Unfortunately I basically never buy lottery tickets but dare to dream.
Sign up for a Slickdeals account to remove this ad.
Using the CEA-2010 rules Audioholics measured a maxium SPL of 117.5db at 63 hrz & then it is about -10db down at 30hrz, matching the spec published.
It is still able to output 107db at 30hrz and 98db at 20hrz.
This is extremely good for a sub that right now is $250.
Speedwoofer 10e
Lol. If its really linear for music, it can't be meant for it? Because it also good for home theater?
I know its not $250 but can be had at $299ish or blemish for less with a better warranty and build quality.
It's been reviewed by many, just seconds on Google will confirm its musicality.
I won't argue to it being an end all of subs and the Monoprice in this thread is still a lot of SPL for the $ and a great value also.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!