YESWELDER 135A 110V Flux Core Gasless MIG Welder $90 + Free S/H

HeyGuysChrisFixHere

Jul 28, 2026 9:57 PM

1K Comments

Joined Oct 2017

HeyGuysChrisFixHereJul 28, 2026 9:57 PM

1K Comments

Our community has rated this post as helpful. If you agree, why not thank

I've purchased a few different cheap flux core MIG/stick welders and this model as well as the ARCCAPTAIN are the best built and most reliable ones for around $120 (sometimes more, sometimes less since they often go on sale, but the average price of these similar models are around $120). The Harbor Freight Titanium 125 also works equally as well and also sells for around $99-$149 depending on the numerous sales HF always runs, and it is much easier to warranty exchange if you ever have a problem so I'd suggest the Titanium 125 as your 1st choice if you live within 50 miles of any Harbor Freight, then this Yeswelder 135A if you don't live near a HF. Either way, buy the 3pk or 5pk of .YESWELDER E71T-11 030 flux core wire on Amazon because it costs half the price of HF spools and seems to work equally as well. Don't get the E71T-GS variant because that is more brittle and you can't make multiple passes with the GS variant otherwise you'll create porocity and brittle welds that are more prone to crack. the 11 variant can be used to make multiple passes without porocity and without becoming brittle.

3

5

ResidentPony

Jul 28, 2026 10:04 PM

3.3K Comments

Joined Nov 2007

ResidentPonyJul 28, 2026 10:04 PM

3.3K Comments

Considering MIG stands for Metal Inert Gas, and this claims to be gasless MIG, I'm not anticipating high quality. Maybe it's some cheap Chinesium implementation of FCAW, flux core arc welding. It does mention a flux core. (Which would provide the gas atmosphere but require specific welding supplies.)

4

HeyGuysChrisFixHere

Jul 28, 2026 10:25 PM

1K Comments

Joined Oct 2017

HeyGuysChrisFixHereJul 28, 2026 10:25 PM

1K Comments

Quote from ResidentPony

:

Considering MIG stands for Metal Inert Gas, and this claims to be gasless MIG, I'm not anticipating high quality. Maybe it's some cheap Chinesium implementation of FCAW, flux core arc welding. It does mention a flux core. (Which would provide the gas atmosphere but require specific welding supplies.)

A lot of old timers who have only used traditional MIG, or tried flux core MIG from 20yrs ago when the technology sucked, will have the same preconceived notions that you're having. I also thought the same having only used a stick welder my whole life and hearing from all the other oldtimer "pros" that flux core welders were the worst thing in the world and a complete waste of money! Well I recently bought 3 different brands of sub $100 flux core MIG welders and they all work surprisingly well with no proocity, and they also work a lot better than traditional MIG when welding outdoors in breezy conditions because the flux core is much better at shielding the weld area when it is windy whereas a traditional MIG welder gas shroud isn't as effective in those conditions. The flux core technology seems to have advanced and completely caught up, and they are a very affordable way to get into welding now. I have a Seesii $62 version of this model, I have this exact model, and I have the ARCCAPTAIN version of this model, all are 110V .030 flux core wire MIG/TIG/stick welders and they all cost under $100 each lol! They produce welds equal to my good old 220V Lincoln stick welder that costs literally 10x the price! I bought the Seesii $62 one first as a joke just to see how terrible it was, but when I tried it I realized I must have been living in the past parroting the "flux core sucks" statements without any current proof because it actually made nice consistent welds that penetrate butt joints of steel plates up to around 3/16" without having to notch it first...and from a 110V outlet!

1

dogstar1

Jul 28, 2026 11:04 PM

2.2K Comments

Joined Sep 2009

dogstar1Jul 28, 2026 11:04 PM

2.2K Comments

Quote from HeyGuysChrisFixHere

:

I've purchased a few different cheap flux core MIG/stick welders and this model as well as the ARCCAPTAIN are the best built and most reliable ones for around $120 (sometimes more, sometimes less since they often go on sale, but the average price of these similar models are around $120).

Any thoughts on a cheap, next step up iversion in case I someday want to use gas (I actually have a bottle)? Something that comes with or can take a gas line?

HeyGuysChrisFixHere

Jul 28, 2026 11:18 PM

1K Comments

Joined Oct 2017

HeyGuysChrisFixHereJul 28, 2026 11:18 PM

1K Comments

Quote from dogstar1

:

Any thoughts on a cheap, next step up iversion in case I someday want to use gas (I actually have a bottle)? Something that comes with or can take a gas line?

ARCCAPTAIN has models around $300-$400 (such as the MIG200, a model I've been considering upgrading to) that can use gas and those have lots of independent people reviewing them on YouTube showing how well they work, as well as people making "how well it still works after 1 year" type videos. Those seem to be the most feature-packed inexpensive welders that are still reliable and actually output close to the claimed power. My Seesii $62 welder outputs roughly 1/2 the claimed power so I have to turn it up way past the recommended setting to get it to the proper amp/voltage but when I do it works well. Harbor Freight midrange models in the $400-$800 range also seem to have lots of good reviews for both functionality and reliability but they cost a bit more than ARCCAPTAIN, however HF return/exchange is WAY EASIER to just swap in store immediately rather than having to ship any other brand and wait weeks for it to get fixed and returned, sometimes footing you with the shipping cost too.

1

GhettoTech

Jul 29, 2026 8:42 AM

60 Comments

Joined Jul 2016

GhettoTechJul 29, 2026 8:42 AM

60 Comments

Quote from dogstar1

:

Any thoughts on a cheap, next step up iversion in case I someday want to use gas (I actually have a bottle)? Something that comes with or can take a gas line?

The Yeswelder MIG-205DS would be a good choice. I had the older blue and white version and it worked great. The only issue with the older one has no actual wire control. It auto adjusted the wire speed based on your settings. It was typically pretty good but sometimes its nice to be able to independently control the speed. Not sure if the new 205DS changed that. I moved up to their dual pulse DP200 which is amazing but a lot more. I also own a Yeswelder CUT-55DS PRO plasma cutter. No issues with any of their equipment.

1

ResidentPony

Jul 29, 2026 12:42 PM

3.3K Comments

Joined Nov 2007

ResidentPonyJul 29, 2026 12:42 PM

3.3K Comments

Quote from HeyGuysChrisFixHere

:

A lot of old timers who have only used traditional MIG, or tried flux core MIG from 20yrs ago when the technology sucked, will have the same preconceived notions that you're having. I also thought the same having only used a stick welder my whole life and hearing from all the other oldtimer "pros" that flux core welders were the worst thing in the world and a complete waste of money! Well I recently bought 3 different brands of sub $100 flux core MIG welders and they all work surprisingly well with no proocity, and they also work a lot better than traditional MIG when welding outdoors in breezy conditions because the flux core is much better at shielding the weld area when it is windy whereas a traditional MIG welder gas shroud isn't as effective in those conditions. The flux core technology seems to have advanced and completely caught up, and they are a very affordable way to get into welding now. I have a Seesii $62 version of this model, I have this exact model, and I have the ARCCAPTAIN version of this model, all are 110V .030 flux core wire MIG/TIG/stick welders and they all cost under $100 each lol! They produce welds equal to my good old 220V Lincoln stick welder that costs literally 10x the price! I bought the Seesii $62 one first as a joke just to see how terrible it was, but when I tried it I realized I must have been living in the past parroting the "flux core sucks" statements without any current proof because it actually made nice consistent welds that penetrate butt joints of steel plates up to around 3/16" without having to notch it first...and from a 110V outlet!

I have nothing against flux core. I have concerns about a no-name brand that misnames their own item in the product title before they even get going; after taking apart piles of Chinese products I've found so many are missing critical safety or durability components, so when I see reviews about how lightweight the box feels or I see the vendor doesn't even know what they're selling, I wonder how many shortcuts were shrugged at and taken.

1

dogstar1

Jul 30, 2026 5:47 PM

2.2K Comments

Joined Sep 2009

dogstar1Jul 30, 2026 5:47 PM

2.2K Comments

Quote from HeyGuysChrisFixHere

:

ARCCAPTAIN has models around $300-$400 (such as the MIG200, a model I've been considering upgrading to) that can use gas and those have lots of independent people reviewing them on YouTube showing how well they work, as well as people making "how well it still works after 1 year" type videos. Those seem to be the most feature-packed inexpensive welders that are still reliable and actually output close to the claimed power. My Seesii $62 welder outputs roughly 1/2 the claimed power so I have to turn it up way past the recommended setting to get it to the proper amp/voltage but when I do it works well. Harbor Freight midrange models in the $400-$800 range also seem to have lots of good reviews for both functionality and reliability but they cost a bit more than ARCCAPTAIN, however HF return/exchange is WAY EASIER to just swap in store immediately rather than having to ship any other brand and wait weeks for it to get fixed and returned, sometimes footing you with the shipping cost too.

Thanks (can't rep you, bummer)!

Quote from GhettoTech

:

The Yeswelder MIG-205DS would be a good choice. I had the older blue and white version and it worked great. The only issue with the older one has no actual wire control. It auto adjusted the wire speed based on your settings. It was typically pretty good but sometimes its nice to be able to independently control the speed. Not sure if the new 205DS changed that. I moved up to their dual pulse DP200 which is amazing but a lot more. I also own a Yeswelder CUT-55DS PRO plasma cutter. No issues with any of their equipment.

Thanks!

For both -- I had MillerMatic 135 that I bought used. People said it was the gold standard and it would last forever, but it had an issue with a short in a circuit board where it would either randomly shut off, or never start up, so I never really used it. Board wasn't available from Miller any longer and the repair costs from 3rd party (including troubleshooting was more than half the price of a new Miller 142 or about the price of a new Hobart 140 from Home Depot). So I sold it as is (buyer was psyched and sure they could fix it) and for what I got I can buy something new that works or at least has a warranty. I'm pretty sure flux core will do what I need but since I "had" a gas welder I feel like I should get one, just in case. shake head

Thanks again.

Last edited by dogstar1 July 30, 2026 at 10:47 AM.

GhettoTech

Jul 30, 2026 5:56 PM

60 Comments

Joined Jul 2016

GhettoTechJul 30, 2026 5:56 PM

60 Comments

Quote from dogstar1

:

Thanks (can't rep you, bummer)!

Thanks! Repped!

For both -- I had MillerMatic 135 that I bought used. People said it was the gold standard and it would last forever, but it had an issue with a short in a circuit board where it would either randomly shut off, or never start up, so I never really used it. Board wasn't available from Miller any longer and the repair costs from 3rd party (including troubleshooting was more than half the price of a new Miller 142 or about the price of a new Hobart 140 from Home Depot). So I sold it as is (buyer was psyched and sure they could fix it) and for what I got I can buy something new that works or at least has a warranty. I'm pretty sure flux core will do what I need but since I "had" a gas welder I feel like I should get one, just in case. shake head

Thanks again.

Happy to help. I started with flux with mine. It works and you can make some great welds but the splatter and smoke is annoying. After I started using the welder more, I moved to using solid core and gas. It was so much better. The cost of the tank and gas is not cheap. I chose to by my 80 tank and it was around 300 bucks. You can rent for cheaper but I prefer to own my own equipment. refills are around 60 bucks. It lasts a long time since I am just a hobby welder.

Buckshot5

Aug 2, 2026 11:28 PM

184 Comments

Joined Dec 2011

Buckshot5Aug 2, 2026 11:28 PM

184 Comments

Quote from HeyGuysChrisFixHere

:

I've purchased a few different cheap flux core MIG/stick welders and this model as well as the ARCCAPTAIN are the best built and most reliable ones for around $120 (sometimes more, sometimes less since they often go on sale, but the average price of these similar models are around $120). The Harbor Freight Titanium 125 also works equally as well and also sells for around $99-$149 depending on the numerous sales HF always runs, and it is much easier to warranty exchange if you ever have a problem so I'd suggest the Titanium 125 as your 1st choice if you live within 50 miles of any Harbor Freight, then this Yeswelder 135A if you don't live near a HF. Either way, buy the 3pk or 5pk of .YESWELDER E71T-11 030 flux core wire on Amazon because it costs half the price of HF spools and seems to work equally as well. Don't get the E71T-GS variant because that is more brittle and you can't make multiple passes with the GS variant otherwise you'll create porocity and brittle welds that are more prone to crack. the 11 variant can be used to make multiple passes without porocity and without becoming brittle.

The real ChrisFix?

Snot_So_Fast

Aug 3, 2026 1:21 AM

108 Comments

Joined Dec 2018

Snot_So_FastAug 3, 2026 1:21 AM

108 Comments

Code isn't working for me. Deal might be dead.

YESWELDER 135A 110V Flux Core Gasless MIG Welder $90 + Free S/H

$90

$150

Community Voting

Join The Conversation

11 Comments

Join The Conversation

Related Searches