frontpage
Creality SPARKX i7 Nano Combo 3D Printer w/ 4x 1kg Hyper PLA RFID Filament
$299
$374
20% off
+ Free S&Hat eBay
Browse every Black Friday offer we could findBrowse every Black Friday offer we could find
View The Sift+ Free S&Hat eBayDeal Details
creality-official-store via eBay has Creality SPARKX i7 Nano Combo 3D Printer w/ 4x 1kg Hyper PLA RFID Filament on sale for $373.75 - $74.75 (20%) when you apply coupon code NEWFINDS20 at checkout = $299. Shipping is free.
Thanks to Community Member JoshC7121 for sharing this deal.
Product Details:
Thanks to Community Member JoshC7121 for sharing this deal.
Product Details:
- Build Volume: 260 × 260 × 255 mm
- Maximum Speed: Up to 500 mm/s
- Nozzle Temperature: Up to 300°C (hardened steel quick-swap nozzle)
- Extruder Type: Direct drive
- Leveling: Full-auto leveling
- AI Capabilities: Built-in AI camera for spaghetti and failure detection
- Operation Modes: Quiet night mode (~45 dB or lower)
- Space-Saving Design: Spools mount directly on the frame rather than sitting on a separate table footprint.
- Filament Management: Supports auto-feed, auto-retract, and auto-refill capabilities to switch spools seamlessly.
- Beginner Focused: Pre-assembled structure allowing fast setup out of the box
Editor's Notes
Written by Nate650 | Staff- About this deal:
- Our research indicates that this deal is $11 less (33.3% savings) than the next best available price from a reputable merchant with prices starting from $33 at the time of this post.
- About this product:
- About this store:
- 30 days returns. Seller pays for return shipping.
- Additional notes:
- Please see the original post for additional details & give the wiki and additional forum comments a read for helpful discussion.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
creality-official-store via eBay has Creality SPARKX i7 Nano Combo 3D Printer w/ 4x 1kg Hyper PLA RFID Filament on sale for $373.75 - $74.75 (20%) when you apply coupon code NEWFINDS20 at checkout = $299. Shipping is free.
Thanks to Community Member JoshC7121 for sharing this deal.
Product Details:
Thanks to Community Member JoshC7121 for sharing this deal.
Product Details:
- Build Volume: 260 × 260 × 255 mm
- Maximum Speed: Up to 500 mm/s
- Nozzle Temperature: Up to 300°C (hardened steel quick-swap nozzle)
- Extruder Type: Direct drive
- Leveling: Full-auto leveling
- AI Capabilities: Built-in AI camera for spaghetti and failure detection
- Operation Modes: Quiet night mode (~45 dB or lower)
- Space-Saving Design: Spools mount directly on the frame rather than sitting on a separate table footprint.
- Filament Management: Supports auto-feed, auto-retract, and auto-refill capabilities to switch spools seamlessly.
- Beginner Focused: Pre-assembled structure allowing fast setup out of the box
Editor's Notes
Written by Nate650 | Staff- About this deal:
- Our research indicates that this deal is $11 less (33.3% savings) than the next best available price from a reputable merchant with prices starting from $33 at the time of this post.
- About this product:
- About this store:
- 30 days returns. Seller pays for return shipping.
- Additional notes:
- Please see the original post for additional details & give the wiki and additional forum comments a read for helpful discussion.
Community Voting
Deal
Score
+43
Good Deal
Bad Deal
Community Reviews
Creality's ISPARKX 7 Nano bundle stands out as a compact entry into multi color printing, with the Nano Combo adding the CFS Nano system and 4 kilograms of RFID Hyper PLA. The included filament is a major value boost, and the printer is framed as a strong first machine for decorative models, cosplay parts, household items, and prototypes. Deal pricing has dropped as low as the low 200s with coupons and offers. A restart after every print and a delayed CFS Nano shipment were also reported.
Common Questions (5)
The bundle includes 4 full-size rolls of RFID Hyper PLA. That adds value because the filament is included instead of being purchased separately.
Yes. The Nano Combo is the same printer plus the CFS Nano system, which enables multi-color printing. The non-combo version is just the printer itself.
Use eBay make-offer with a $335 offer, then apply coupon NEWFINDS20 before sending the offer. That combination was accepted immediately and brought the pre-tax total to about $268.
Yes. The seller said the printer ships first and the CFS Nano kit follows later, with the next batch expected in about a week.
If you are not in a rush, waiting can save more money. A live sale reportedly dropped the price to about $208, and one buyer paid $239 before tax when the bundle included only two rolls of PLA.
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
30 Comments
Sign up for a Slickdeals account to remove this ad.
I'd say that if you're not in a rush, wait until the next Live on Monday.
Sign up for a Slickdeals account to remove this ad.
The product you ordered is the I7 NANO COMBO, which consists of a SparkX I7 and a CFS NANO KIT.
Since the CFS NANO KIT is currently out of stock, we will ship the I7 to you first. Once the CFS NANO KIT arrives, we will ship it to you promptly.
The next batch of CFS NANO KITs is expected to arrive in about a week!
https://www.ebay.com/itm/377393554845
.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!