Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
frontpage
frontpage
JoshC7121 17.8K Views
Jul 31, 2026 1:46 PM

Creality SPARKX i7 Nano Combo 3D Printer w/ 4x 1kg Hyper PLA RFID Filament

$299

$374

20% off
+ Free S&Hat eBay
Get Deal at eBay

Why are you downvoting this deal?

Good Deal?
29Comments
Save
Share
Deal Details
creality-official-store via eBay has Creality SPARKX i7 Nano Combo 3D Printer w/ 4x 1kg Hyper PLA RFID Filament on sale for $373.75 - $74.75 (20%) when you apply coupon code NEWFINDS20 at checkout = $299. Shipping is free.

Thanks to Community Member JoshC7121 for sharing this deal.

Product Details:
  • Build Volume: 260 × 260 × 255 mm
  • Maximum Speed: Up to 500 mm/s
  • Nozzle Temperature: Up to 300°C (hardened steel quick-swap nozzle)
  • Extruder Type: Direct drive
  • Leveling: Full-auto leveling
  • AI Capabilities: Built-in AI camera for spaghetti and failure detection
  • Operation Modes: Quiet night mode (~45 dB or lower)
  • Space-Saving Design: Spools mount directly on the frame rather than sitting on a separate table footprint.
  • Filament Management: Supports auto-feed, auto-retract, and auto-refill capabilities to switch spools seamlessly.
  • Beginner Focused: Pre-assembled structure allowing fast setup out of the box

Editor's Notes

Written by Nate650 | Staff
  • About this deal:
    • Our research indicates that this deal is $11 less (33.3% savings) than the next best available price from a reputable merchant with prices starting from $33 at the time of this post.
  • About this product:
  • About this store:
    • 30 days returns. Seller pays for return shipping.
  • Additional notes:
    • Please see the original post for additional details & give the wiki and additional forum comments a read for helpful discussion.

Original Post

Written by JoshC7121
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
creality-official-store via eBay has Creality SPARKX i7 Nano Combo 3D Printer w/ 4x 1kg Hyper PLA RFID Filament on sale for $373.75 - $74.75 (20%) when you apply coupon code NEWFINDS20 at checkout = $299. Shipping is free.

Thanks to Community Member JoshC7121 for sharing this deal.

Product Details:
  • Build Volume: 260 × 260 × 255 mm
  • Maximum Speed: Up to 500 mm/s
  • Nozzle Temperature: Up to 300°C (hardened steel quick-swap nozzle)
  • Extruder Type: Direct drive
  • Leveling: Full-auto leveling
  • AI Capabilities: Built-in AI camera for spaghetti and failure detection
  • Operation Modes: Quiet night mode (~45 dB or lower)
  • Space-Saving Design: Spools mount directly on the frame rather than sitting on a separate table footprint.
  • Filament Management: Supports auto-feed, auto-retract, and auto-refill capabilities to switch spools seamlessly.
  • Beginner Focused: Pre-assembled structure allowing fast setup out of the box

Editor's Notes

Written by Nate650 | Staff
  • About this deal:
    • Our research indicates that this deal is $11 less (33.3% savings) than the next best available price from a reputable merchant with prices starting from $33 at the time of this post.
  • About this product:
  • About this store:
    • 30 days returns. Seller pays for return shipping.
  • Additional notes:
    • Please see the original post for additional details & give the wiki and additional forum comments a read for helpful discussion.

Original Post

Written by JoshC7121

Community Voting

Deal Score
+43
Good Deal
Bad Deal

Why are you downvoting this deal?

Get Deal at eBay

Community Reviews

Creality's ISPARKX 7 Nano bundle stands out as a compact multi color printer package, especially for first time users and anyone wanting to print decorative models, cosplay parts, household items, or prototypes. The included 4 kilogram RFID Hyper PLA adds real value, and the bundle has been bought down from the listed price with the NEWFINDS20 coupon and a make offer workflow. The Nano keeps the same bed and print size as the larger SparkX i7 while taking up less space because the MMS unit is external. A few notes matter, including delayed shipment for the CFS Nano kit and reports of a printer that needed restarting after every print.

Common Questions (5)

AI-generated summary based on comments from the community. Updated ago

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

29 Comments

Sign up for a Slickdeals account to remove this ad.

Aug 1, 2026 7:20 PM
129 Comments
Joined Jun 2014
erad13Aug 1, 2026 7:20 PM
129 Comments
This or AD5X that's been on sale lately?
Last edited by erad13 August 1, 2026 at 01:00 PM.
Aug 1, 2026 8:39 PM
2.2K Comments
Joined Nov 2009
cameronfieldAug 1, 2026 8:39 PM
2.2K Comments
Quote from erad13 View quoted comment :
This or AD5X that's been on sale lately?
I came to ask this exact same question!
Aug 1, 2026 11:25 PM
88 Comments
Joined Jul 2019
Diditvd22Aug 1, 2026 11:25 PM
88 Comments
Man I really want a 3d printer just so many options lol. Not sure which one to get but these seems like a great deal.
Aug 1, 2026 11:30 PM
1.4K Comments
Joined Jul 2009
xllbenllxAug 1, 2026 11:30 PM
1.4K Comments
Quote from erad13 View quoted comment :
This or AD5X that's been on sale lately?
I know a lot of people have had a lot of success w the ad5x, but I had a lot of issues. Support is responsive, but their answer is to just replace every single part. It is the only printer I've had so I don't have any other baseline to compare, but I've read that there are worse brands
Aug 2, 2026 10:09 PM
54 Comments
Joined Nov 2025
VioletVest987Aug 2, 2026 10:09 PM
54 Comments
Creality needs to pick a lane. These printers are great, but the naming scheme and filament input systems are out of control. There's the standalone, the CFS lite, the auto feeder, and now this CFS nano. Prices are all over the place too. Again, highly recommend the printer, but what are they doing...?
Aug 4, 2026 1:45 PM
47 Comments
Joined Dec 2023
Jess0032Aug 4, 2026 1:45 PM
47 Comments
I picked one up during last night's Live. I missed the flash sale, but someone in the chat mentioned that it had dropped to $208 with cupon. I ended up getting it for $239 before taxes. It was the same product but only included two rolls of PLA.

I'd say that if you're not in a rush, wait until the next Live on Monday.
Aug 4, 2026 1:59 PM
646 Comments
Joined Apr 2024
NgreedslopiaGPUAug 4, 2026 1:59 PM
646 Comments
Quote from Bires View quoted comment :
It's a great printer, like all the 3rd-gen multicolors, but remember, 4th-gen multitool printers are here. The early versions (Snapmaker, Flashforger, Prusa with mods) are around a $1000. If the pattern holds Anycubic and Creality will release their 4-gens later this year for ~$400.
By the time 4th gen comes down to 3rd gen prices useless and malicious bills by California lawmakers with an agenda like up for reelection on Nov 3rd 2026 Rebecca Bauer-Kahan's sponsored by constitution hating Michael Bloomberg AB2047 bill will likely be in effect, so all our files that we print will need big brothers permission behorehand. Newyorks bill already passed. the landscape of 3d printing will become like 2D printers. Proprietary Garbage.
Last edited by NgreedslopiaGPU August 4, 2026 at 07:06 AM.
1

Sign up for a Slickdeals account to remove this ad.

Aug 5, 2026 6:06 AM
100 Comments
Joined Dec 2007
ben_chow6157Aug 5, 2026 6:06 AM
100 Comments
Mine arrived today, it is the standalone not the one pictured.
Aug 6, 2026 2:43 AM
71 Comments
Joined Apr 2022
mrcoderAug 6, 2026 2:43 AM
71 Comments
Quote from Jess0032 View quoted comment :
I picked one up during last night's Live. I missed the flash sale, but someone in the chat mentioned that it had dropped to $208 with cupon. I ended up getting it for $239 before taxes. It was the same product but only included two rolls of PLA. I'd say that if you're not in a rush, wait until the next Live on Monday.
I was in the this Monday live and I saw this was down to $200 for a few minutes (but I don't remember filament bundled or not). But I went with AD5X as it is a CoreXY printer (purely by Gemini suggestion as I'm a total newbie)
Aug 6, 2026 6:20 PM
3 Comments
Joined May 2024
ElaborationAug 6, 2026 6:20 PM
3 Comments
FYI - after purchase, they messaged me:

The product you ordered is the I7 NANO COMBO, which consists of a SparkX I7 and a CFS NANO KIT.
Since the CFS NANO KIT is currently out of stock, we will ship the I7 to you first. Once the CFS NANO KIT arrives, we will ship it to you promptly.
The next batch of CFS NANO KITs is expected to arrive in about a week!
Aug 6, 2026 11:22 PM
87 Comments
Joined Feb 2015
jerryk959Aug 6, 2026 11:22 PM
87 Comments
Nice!
Aug 27, 2026 3:05 AM
1.6K Comments
Joined May 2012
CharlesBarkleyAug 27, 2026 3:05 AM
1.6K Comments
Got mine, ending up returning it, the dang thing has to be restarted after every print. Worked with support, updating/downgrading firmware, but still no luck. Maybe I can try the i8 when it comes out, a lot less waste filament then, I hope!
Oct 7, 2026 3:00 AM
3 Comments
Joined Oct 2014
ErosuROct 7, 2026 3:00 AM
3 Comments
Please use this link, the link in the post does not include 4 RFID
https://www.ebay.com/itm/377393554845
Oct 16, 2026 6:30 PM
36 Comments
Joined Mar 2020
CertifiedworkerOct 16, 2026 6:30 PM
36 Comments
Quote from funkmasterscizz View quoted comment :
This or the SPARKX i7? I am new to this and want to get one for my son's bday coming up he has been asking for one. Which is a better package with all I need to get started?
The printer itself is exactly the same. The only difference is that the "Nano Combo" includes the CFS Nano system, which allows you to do multi-color printing. I bet your son will be into multi-color printing when he receives the printer. Go with Nano Combo
.
Last edited by Certifiedworker October 16, 2026 at 11:35 AM.

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

Related Searches

ComputersPrinters3D PrinterseBay