Update: This popular Frontpage Deal is still available.
KINGROON 3D Store via AliExpress has
10-Pack 1KG KINGROON 1.75mm PLA 3D Printer Filament (10KG PLA Black) on sale for $65.34 - $6 with promo code
VSUSDEAL6 at checkout = $59.34
-> now $59.39.
Shipping is free.
Thanks to Community Member
danjayh for sharing this deal.
- Note: Price may fluctuate slightly with currency exchange rates. You must be signed into your AliExpress account and have your address added to add items to your cart and place an order. You may have to manually type in the promo code to apply it at checkout. This item ships from a USA warehouse. For expedited customer service, please email [email protected].
Details:
- 10 rolls Kingroon PLA filament 1.75 mm for FDM 3D printers
- Material: PLA; net weight 1 kg per roll (2.2 lbs); gross weight 1.3 kg per roll (2.87 lbs)
- Filament diameter 1.75 mm with tolerance ±0.03 mm
- Density 1.25 ± 0.05 g/cm³; length approximately 300 m per roll
- Print temperature 190–210°C; print speed 40–90 mm/s
- High-quality plastic consumables for 3D printing
- Total package: 10 × 1 kg rolls
Community Reviews
Kingroon PLA is positioned as a budget filament that can print reliably and offers strong value, especially for everyday use and high-speed printers. The black PLA and other base colors are described as generally solid, with good results on PLA and PETG, no tangled spools, and enough strength for functional parts. The main drawbacks are inconsistent quality control, with some spools clogging, poor bed adhesion, or slightly oversized sections, and the colors are not especially vibrant. It is a practical low-cost option if you are willing to tolerate occasional tuning.
Kingroon PLA and PETG reportedly run without failed prints for some users across many spools.
Kingroon PETG reportedly prints reliably and consistently with no problems after setup.
Kingroon PLA and PETG reportedly support high-volume use, including runs totaling 20+ kg.
Kingroon PETG reportedly works well when using the Sunlu PETG profile in Orca.
Some Kingroon PLA batches reportedly clog the extruder every layer or two and require switching brands to resolve it.
Some users report inconsistent QC across spools, including weak layer adhesion and clogging that can require tuning.
Some spools reportedly show QC issues where spots appear wider than 1.75mm, suggesting merged leftovers.
Some Kingroon PLA reportedly has poor plate adhesion and can require taking apart the extruder multiple times.
Common Questions (5)
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
33 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
Sign up for a Slickdeals account to remove this ad.
I use AI to tune my slicer settings
I didn't care about filament print speeds when all I had was an Ender 3, because it was impossible for that to exceed what the filament could handle and still have good geometry on all exterior sides of the print. Today, with a high speed printer, I've seen what happens when you try to print infill at 300mm/sec with filament that's only rated for 40-60mm speeds (the infill starts looking like swiss cheese), so I just don't want to buy anything that can't handle a minimum of 200mm/sec (either by official rating or user feedback that a filament still works well beyond the stated range).
For me it's mixed results across any brand/color.
I don't like this cheaper color mix. Everything else is more expensive.
For reference, I am mostly printing with toolchangers. (U1 and C5Pro)
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!