Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
  1. Deal Image
Item 1 of 3
  1. Deal Image
  2. Deal Image
  3. Deal Image
Item 1 of 3
frontpagedanjayh posted Aug 20, 2026 3:06 PM

10-Pk 1KG KINGROON 1.75mm PLA 3D Printer Filament (Black)

$59

$185

68% off
+ Free S&Hat AliExpress
18 Comments
3.9K Views
Get Deal at AliExpress
Deal Details
KINGROON 3D Store via AliExpress has 10-Pack 1KG KINGROON 1.75mm PLA 3D Printer Filament (10KG PLA Black) on sale for $65.34 - $6 with promo code VSUSDEAL6 at checkout = $59.34. Shipping is free.

Thanks to Community Member danjayh for sharing this deal.
  • Note: Price may fluctuate slightly with currency exchange rates. You must be signed into your AliExpress account and have your address added to add items to your cart and place an order. You may have to manually type in the promo code to apply it at checkout. This item ships from a USA warehouse. For expedited customer service, please email [email protected].
Details:
  • 10 rolls Kingroon PLA filament 1.75 mm for FDM 3D printers
  • Material: PLA; net weight 1 kg per roll (2.2 lbs); gross weight 1.3 kg per roll (2.87 lbs)
  • Filament diameter 1.75 mm with tolerance ±0.03 mm
  • Density 1.25 ± 0.05 g/cm³; length approximately 300 m per roll
  • Print temperature 190–210°C; print speed 40–90 mm/s
  • High-quality plastic consumables for 3D printing
  • Total package: 10 × 1 kg rolls

Editor's Notes

Written by RevOne | Staff
  • Rated 4.9 out of 5 stars from customer reviews.
  • Price of $5.93 per 1KG roll.
  • This offer roughly matches the previous Frontpage Deal from July.
  • At the time of this posting, our research indicates that this is $20.12 lower than the next best comparable online prices starting from $79.46.

Original Post

Written by danjayh
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
KINGROON 3D Store via AliExpress has 10-Pack 1KG KINGROON 1.75mm PLA 3D Printer Filament (10KG PLA Black) on sale for $65.34 - $6 with promo code VSUSDEAL6 at checkout = $59.34. Shipping is free.

Thanks to Community Member danjayh for sharing this deal.
  • Note: Price may fluctuate slightly with currency exchange rates. You must be signed into your AliExpress account and have your address added to add items to your cart and place an order. You may have to manually type in the promo code to apply it at checkout. This item ships from a USA warehouse. For expedited customer service, please email [email protected].
Details:
  • 10 rolls Kingroon PLA filament 1.75 mm for FDM 3D printers
  • Material: PLA; net weight 1 kg per roll (2.2 lbs); gross weight 1.3 kg per roll (2.87 lbs)
  • Filament diameter 1.75 mm with tolerance ±0.03 mm
  • Density 1.25 ± 0.05 g/cm³; length approximately 300 m per roll
  • Print temperature 190–210°C; print speed 40–90 mm/s
  • High-quality plastic consumables for 3D printing
  • Total package: 10 × 1 kg rolls

Editor's Notes

Written by RevOne | Staff
  • Rated 4.9 out of 5 stars from customer reviews.
  • Price of $5.93 per 1KG roll.
  • This offer roughly matches the previous Frontpage Deal from July.
  • At the time of this posting, our research indicates that this is $20.12 lower than the next best comparable online prices starting from $79.46.

Original Post

Written by danjayh

Community Voting

Deal Score
+35
Good Deal
Get Deal at AliExpress

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

18 Comments

Sign up for a Slickdeals account to remove this ad.

Aug 20, 2026 9:36 PM
13.6K Comments
Joined Oct 2008
guest2011Aug 20, 2026 9:36 PM
13.6K Comments
why so cheap? is it crap?
Aug 21, 2026 1:44 AM
106 Comments
Joined Dec 2013
codyisinAug 21, 2026 1:44 AM
106 Comments
Quote from guest2011 :
why so cheap? is it crap?
Pretty normal sales prices for this brand 50-60's
Aug 21, 2026 1:48 AM
3 Comments
Joined Sep 2022
HorrorDoodAug 21, 2026 1:48 AM
3 Comments
Quote from guest2011 :
why so cheap? is it crap?
Ive been using their PETG and absolutely love it. No failed prints compared to the several fails with creality filament
Aug 21, 2026 2:52 AM
1K Comments
Joined Aug 2009
Bizkit64Aug 21, 2026 2:52 AM
1K Comments
Quote from guest2011 :
why so cheap? is it crap?
To me this is the going rate for what this stuff should sell for. I've had zero issues and I've ran 20+ kg of their PLA/PETG.
1
Aug 21, 2026 3:26 AM
431 Comments
Joined Jul 2019
VioletFruit436Aug 21, 2026 3:26 AM
431 Comments
What kinds of print speeds can you achieve with this filament and still have things come out well?
Original Poster
Aug 21, 2026 4:32 AM
758 Comments
Joined Oct 2009
danjayh
Original Poster
Aug 21, 2026 4:32 AM
758 Comments
I've gone through about 7kg of my last batch of these, and it's been great. Printed just as well as any other PLA. Then I put in spool #8 and it clogs every layer or two. Tried 3 or 4 times, same deal. Swapped to Anycubic PLA, and the problem went away. I think I'm going to dump the entire spool ... considering that I only paid $4.80/spool after the coupon and the cashback site I used, I can dump one and it's still a great deal (I did try cutting ~10-20ft off, but it continued to have problems). I still bought another 20kg, though ... for the price, it's worth a little hassle.
Aug 21, 2026 12:17 PM
8.1K Comments
Joined Mar 2005
flangomangoAug 21, 2026 12:17 PM
8.1K Comments
Quote from danjayh :
I've gone through about 7kg of my last batch of these, and it's been great. Printed just as well as any other PLA. Then I put in spool #8 and it clogs every layer or two. Tried 3 or 4 times, same deal. Swapped to Anycubic PLA, and the problem went away. I think I'm going to dump the entire spool ... considering that I only paid $4.80/spool after the coupon and the cashback site I used, I can dump one and it's still a great deal (I did try cutting ~10-20ft off, but it continued to have problems). I still bought another 20kg, though ... for the price, it's worth a little hassle.
Never had any issues with Kingroon PLA or PETG, I have 20 spools of each in rainbow, 20 spools each in black

Sign up for a Slickdeals account to remove this ad.

Aug 21, 2026 12:20 PM
8.1K Comments
Joined Mar 2005
flangomangoAug 21, 2026 12:20 PM
8.1K Comments
Quote from VioletFruit436 :
What kinds of print speeds can you achieve with this filament and still have things come out well?
Depends on the model, I rarely run at full speed

I use AI to tune my slicer settings
Aug 21, 2026 12:48 PM
431 Comments
Joined Jul 2019
VioletFruit436Aug 21, 2026 12:48 PM
431 Comments
Quote from flangomango :
Depends on the model, I rarely run at full speed I use AI to tune my slicer settings
Other than if you have a crazy model with insane overhangs that need to br printed very slowly to come out right, the model you're printing shouldn't have much of any effect on print speeds; that would be based on how good your printer is, and how fast the filament can melt.

I didn't care about filament print speeds when all I had was an Ender 3, because it was impossible for that to exceed what the filament could handle and still have good geometry on all exterior sides of the print. Today, with a high speed printer, I've seen what happens when you try to print infill at 300mm/sec with filament that's only rated for 40-60mm speeds (the infill starts looking like swiss cheese), so I just don't want to buy anything that can't handle a minimum of 200mm/sec (either by official rating or user feedback that a filament still works well beyond the stated range).
Aug 21, 2026 1:18 PM
29 Comments
Joined Mar 2020
CertifiedworkerAug 21, 2026 1:18 PM
29 Comments
Quote from guest2011 :
why so cheap? is it crap?
it is not crap, but I personally think their colors are not vibrant as others. Still, Kingroon offers best value
1
Aug 21, 2026 3:30 PM
13.6K Comments
Joined Oct 2008
guest2011Aug 21, 2026 3:30 PM
13.6K Comments
Quote from HorrorDood :
Ive been using their PETG and absolutely love it. No failed prints compared to the several fails with creality filament

For me it's mixed results across any brand/color.
Aug 21, 2026 3:35 PM
13.6K Comments
Joined Oct 2008
guest2011Aug 21, 2026 3:35 PM
13.6K Comments
Quote from Certifiedworker :
it is not crap, but I personally think their colors are not vibrant as others. Still, Kingroon offers best value

I don't like this cheaper color mix. Everything else is more expensive.
Yesterday 8:58 PM
94 Comments
Joined Jan 2014
JDizzleFoShizzleYesterday 8:58 PM
94 Comments
IMO Kingroon is best value for both PLA and PETG color mixes and I've ordered probably about 30kg of it so far. As someone said, their colors are not super vibrant but I haven't had issues with using it, nor any tangled spools. They are inexpensive and satisfactory enough for me not to worry about purchasing other filament.
For reference, I am mostly printing with toolchangers. (U1 and C5Pro)
Last edited by JDizzleFoShizzle August 22, 2026 at 02:01 PM.
Today 1:23 PM
130 Comments
Joined Aug 2009
tycodadToday 1:23 PM
130 Comments
Quote from danjayh :
I've gone through about 7kg of my last batch of these, and it's been great. Printed just as well as any other PLA. Then I put in spool #8 and it clogs every layer or two. Tried 3 or 4 times, same deal. Swapped to Anycubic PLA, and the problem went away. I think I'm going to dump the entire spool ... considering that I only paid $4.80/spool after the coupon and the cashback site I used, I can dump one and it's still a great deal (I did try cutting ~10-20ft off, but it continued to have problems). I still bought another 20kg, though ... for the price, it's worth a little hassle.
try drying it for a day (not really need that long of a time), then try again. this is my go to for my prints. it's plenty strong for what i use for my functional toys that move.

Sign up for a Slickdeals account to remove this ad.

Pro
Today 3:05 PM
1.2K Comments
Joined Nov 2013
suihuamo
Pro
Today 3:05 PM
1.2K Comments
Quote from danjayh :
I've gone through about 7kg of my last batch of these, and it's been great. Printed just as well as any other PLA. Then I put in spool #8 and it clogs every layer or two. Tried 3 or 4 times, same deal. Swapped to Anycubic PLA, and the problem went away. I think I'm going to dump the entire spool ... considering that I only paid $4.80/spool after the coupon and the cashback site I used, I can dump one and it's still a great deal (I did try cutting ~10-20ft off, but it continued to have problems). I still bought another 20kg, though ... for the price, it's worth a little hassle.
i got the same issues on couple spools as well, the issue was there are certain spots has much wider than 1.75mm and it looks like they merged the leftovers into one spool, but their QC or the way doing it is not good.

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

Related Searches

ComputersPrinters3D PrintersFree ShippingAliExpress