frontpage
Select Stores: 10-Pc JobSmart 1/2" Drive Deep Impact Socket Set (Metric or SAE)
$5.30 each
$15
In-Store Pickup Onlyat Tractor Supply Co
In-Store Pickup Onlyat Tractor Supply CoDeal Details
Select Tractor Supply Co Stores (store locator) have 10-Pc JobSmart 1/2" Drive Deep Impact Socket Set (Metric or SAE) for $5.29. Choose store pickup where stock permits.
Note: Availability for pickup may vary by location.
Thanks to Community Member jdr123 for finding this deal.
Available:Features:
Note: Availability for pickup may vary by location.
Thanks to Community Member jdr123 for finding this deal.
Available:Features:
- 1/2 in. drive size in 6 pt. SAE or Metric measurement standard
- Chrome-vanadium steel construction for rugged strength
- Deep sockets for use on difficult-to-reach fasteners in recessed areas
- Socket set includes: 5/16 in., 11/32 in., 3/8 in., 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 13/16 in. OR
- Socket set includes: 8 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 19 mm
- Made in Vietnam
- Lifetime guarantee
Editor's Notes
Written by powerfuldoppler | Staff- About this deal:
- Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Select Tractor Supply Co Stores (store locator) have 10-Pc JobSmart 1/2" Drive Deep Impact Socket Set (Metric or SAE) for $5.29. Choose store pickup where stock permits.
Note: Availability for pickup may vary by location.
Thanks to Community Member jdr123 for finding this deal.
Available:Features:
Note: Availability for pickup may vary by location.
Thanks to Community Member jdr123 for finding this deal.
Available:Features:
- 1/2 in. drive size in 6 pt. SAE or Metric measurement standard
- Chrome-vanadium steel construction for rugged strength
- Deep sockets for use on difficult-to-reach fasteners in recessed areas
- Socket set includes: 5/16 in., 11/32 in., 3/8 in., 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 13/16 in. OR
- Socket set includes: 8 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 19 mm
- Made in Vietnam
- Lifetime guarantee
Editor's Notes
Written by powerfuldoppler | Staff- About this deal:
- Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
Community Voting
Deal
Score
+117
Good Deal
Bad Deal
Top Comments
They are eating HF's lunch this year.
Great deal, but on the smaller side.
Community Reviews
JobSmart's 10 piece 1 half inch drive deep impact socket set stands out as a very cheap way to get cased metric or SAE deep sockets for general garage and roadside use. The lifetime guarantee and sturdy case add appeal, and the larger sizes fit common jobs like lug nuts and trailer toolboxes. The main drawback is the small metric end, since the set tops out at 19 mm and the 8 mm to 12 mm sockets are risky on a 1 half inch impact. It is a compact, budget set best suited to bigger fasteners.
Common Questions (5)
An 8 mm socket on a 1/2-inch impact can shear off small bolts, especially if they are rusty or corroded. Short bursts can sometimes break a stuck fastener free, but 3/8-inch or smaller tools are safer for routine work on 8 mm hardware.
The metric set tops out at 19 mm and includes small sizes like 8 mm and 10 mm, so it is better suited to lighter-duty or specific jobs than a full large-size impact set. The 8 mm and 10 mm sockets can be risky on a 1/2-inch impact for rusty fasteners, while 17 mm and 19 mm are useful for common lug nuts.
Availability is store-dependent, and some locations had them in clearance sections or tool bins rather than regular shelving. The sets were found in both front and back clearance areas, so checking those spots can help.
The metric set includes smaller sizes and stops at 19 mm, which is why some shoppers wanted a 12 mm to 24 mm range instead. That makes it less ideal if you need only larger deep sockets for a big 1/2-inch impact wrench.
JobSmart tools are covered by a lifetime guarantee. That makes the low-priced set more practical if you want a cheap cased backup for regular socket use or roadside repairs.
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
40 Comments
Sign up for a Slickdeals account to remove this ad.
Do some research.....
No, you should not use a 1/2-inch impact wrench on an M5 bolt.An M5 bolt is a very small fastener (5mm diameter) that typically requires a tightening torque of only 4 to 6 Newton-meters (Nm), or about 3 to 4.5 foot-pounds (ft-lbs). In stark contrast, a standard 1/2-inch impact wrench is a heavy-duty tool designed to deliver anywhere from 200 to over 1,200 Nm of torque. Using a tool of this size will instantly shear the head right off an M5 bolt, strip its threads, or snap the fastener in
An 8mm head is only an M5 bolt. It will be destroyed using a 1/2 impact on it. The entire reason i mentioned that the sockets are too small to be used on 1/2 drives.
Do some research.....
No, you should not use a 1/2-inch impact wrench on an M5 bolt.An M5 bolt is a very small fastener (5mm diameter) that typically requires a tightening torque of only 4 to 6 Newton-meters (Nm), or about 3 to 4.5 foot-pounds (ft-lbs). In stark contrast, a standard 1/2-inch impact wrench is a heavy-duty tool designed to deliver anywhere from 200 to over 1,200 Nm of torque. Using a tool of this size will instantly shear the head right off an M5 bolt, strip its threads, or snap the fastener in
https://www.tractorsupp
Sign up for a Slickdeals account to remove this ad.
And most impact wrenches are 1/2".
So it makes sense to start a 1/2" kit at 8mm (especially if you are servicing a rusty portable generator).
The HF Pittsburgh deep 1/2" impact set starts at 10mm, and costs $35
It might cost you $5 for just a 10mm 1/2" impact socket alone......
If you pulse it, in little hammer bursts, the rust will shatter from the blows. It's a skill worth practicing, if you want to take your mechanical skills to the next level.
The rule from school always was: Ratchet-> Breaker Bar-> Impact-> Torch
Of course, nowadays we use Induction Bolt Heaters more than Oxy, but sometimes the torch has to come out.
If you pulse it, in little hammer bursts, the rust will shatter from the blows. It's a skill worth practicing, if you want to take your mechanical skills to the next level.
The rule from school always was: Ratchet-> Breaker Bar-> Impact-> Torch
Of course, nowadays we use Induction Bolt Heaters more than Oxy, but sometimes the torch has to come out.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!