frontpage
Select Stores: 10-Pc JobSmart 1/2" Drive Deep Impact Socket Set (Metric or SAE)
$5.30 each
$15
In-Store Pickup Onlyat Tractor Supply Co
In-Store Pickup Onlyat Tractor Supply CoDeal Details
Select Tractor Supply Co Stores (store locator) have 10-Pc JobSmart 1/2" Drive Deep Impact Socket Set (Metric or SAE) for $5.29. Choose store pickup where stock permits.
Note: Availability for pickup may vary by location.
Thanks to Community Member jdr123 for finding this deal.
Available:Features:
Note: Availability for pickup may vary by location.
Thanks to Community Member jdr123 for finding this deal.
Available:Features:
- 1/2 in. drive size in 6 pt. SAE or Metric measurement standard
- Chrome-vanadium steel construction for rugged strength
- Deep sockets for use on difficult-to-reach fasteners in recessed areas
- Socket set includes: 5/16 in., 11/32 in., 3/8 in., 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 13/16 in. OR
- Socket set includes: 8 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 19 mm
- Made in Vietnam
- Lifetime guarantee
Editor's Notes
Written by powerfuldoppler | Staff- About this deal:
- Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Select Tractor Supply Co Stores (store locator) have 10-Pc JobSmart 1/2" Drive Deep Impact Socket Set (Metric or SAE) for $5.29. Choose store pickup where stock permits.
Note: Availability for pickup may vary by location.
Thanks to Community Member jdr123 for finding this deal.
Available:Features:
Note: Availability for pickup may vary by location.
Thanks to Community Member jdr123 for finding this deal.
Available:Features:
- 1/2 in. drive size in 6 pt. SAE or Metric measurement standard
- Chrome-vanadium steel construction for rugged strength
- Deep sockets for use on difficult-to-reach fasteners in recessed areas
- Socket set includes: 5/16 in., 11/32 in., 3/8 in., 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 13/16 in. OR
- Socket set includes: 8 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 19 mm
- Made in Vietnam
- Lifetime guarantee
Editor's Notes
Written by powerfuldoppler | Staff- About this deal:
- Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
Community Voting
Deal
Score
+117
Good Deal
Bad Deal
Top Comments
They are eating HF's lunch this year.
Great deal, but on the smaller side.
Community Reviews
JobSmart's 10 piece 1 half inch drive deep impact socket set stands out as a very cheap way to get cased metric or SAE deep sockets for general garage and roadside use. The lifetime guarantee and sturdy case add appeal, and the larger sizes fit common jobs like lug nuts and trailer toolboxes. The main drawback is the small metric end, since the set tops out at 19 mm and the 8 mm to 12 mm sockets are risky on a 1 half inch impact. It is a compact, budget set best suited to bigger fasteners.
The set can cover common 8mm and 10mm sizes for 1/2-inch impact work.
The cased socket set can stay organized for roadside tire changes in a trailer toolbox.
The sockets can feel solid after receiving the SAE version.
In-store clearance placement can make the sets easier to locate quickly.
Using a 1/2-inch drive on 8-12 mm sockets can be risky and may snap sockets if handled carelessly.
The metric set stops at 19mm, which can leave larger lug-nut sizes uncovered for some needs.
A 1/2-inch impact on very small M5 fasteners can shear heads or strip threads due to high torque.
Rusty 8mm or 10mm bolts with a 1/2-inch impact can lead to broken bolts that require extraction.
Common Questions (5)
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
40 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
They are eating HF's lunch this year.
They also have a lifetime guarantee on Jobsmart tools.
Our community has rated this post as helpful. If you agree, why not thank
btw, this adapter set is only $5.44:
https://www.walmart.com/ip/HT-4PC...om=/search
Great deal, but on the smaller side.
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
And most impact wrenches are 1/2".
So it makes sense to start a 1/2" kit at 8mm (especially if you are servicing a rusty portable generator).
The HF Pittsburgh deep 1/2" impact set starts at 10mm, and costs $35
It might cost you $5 for just a 10mm 1/2" impact socket alone......
Our community has rated this post as helpful. If you agree, why not thank
And most impact wrenches are 1/2".
So it makes sense to start a 1/2" kit at 8mm (especially if you are servicing a rusty portable generator).
The HF Pittsburgh deep 1/2" impact set starts at 10mm, and costs $35
It might cost you $5 for just a 10mm 1/2" impact socket alone......
An 8mm head is only an M5 bolt. It will be destroyed using a 1/2 impact on it. The entire reason i mentioned that the sockets are too small to be used on 1/2 drives.
Do some research.....
No, you should not use a 1/2-inch impact wrench on an M5 bolt.An M5 bolt is a very small fastener (5mm diameter) that typically requires a tightening torque of only 4 to 6 Newton-meters (Nm), or about 3 to 4.5 foot-pounds (ft-lbs). In stark contrast, a standard 1/2-inch impact wrench is a heavy-duty tool designed to deliver anywhere from 200 to over 1,200 Nm of torque. Using a tool of this size will instantly shear the head right off an M5 bolt, strip its threads, or snap the fastener in
An 8mm head is only an M5 bolt. It will be destroyed using a 1/2 impact on it. The entire reason i mentioned that the sockets are too small to be used on 1/2 drives.
Do some research.....
No, you should not use a 1/2-inch impact wrench on an M5 bolt.An M5 bolt is a very small fastener (5mm diameter) that typically requires a tightening torque of only 4 to 6 Newton-meters (Nm), or about 3 to 4.5 foot-pounds (ft-lbs). In stark contrast, a standard 1/2-inch impact wrench is a heavy-duty tool designed to deliver anywhere from 200 to over 1,200 Nm of torque. Using a tool of this size will instantly shear the head right off an M5 bolt, strip its threads, or snap the fastener in
Once you have been turning wrenches for a while, you can feel when a fastener is so stuck that the head will twist off if you turn any harder.
That's when the hammering of an impact is called for. An impact wrench is not just for high torque; it's big advantage is that the hammering shatters the rust holding it frozen. Using short blasts; 90% of the time it will break free without damaging the fastener. The other 10% of the time, ya got to torch the MF.
Practice using the shortest blasts of hammering, it's a skill worth having in the rust belt.
Sign up for a Slickdeals account to remove this ad.
And most impact wrenches are 1/2".
So it makes sense to start a 1/2" kit at 8mm (especially if you are servicing a rusty portable generator).
The HF Pittsburgh deep 1/2" impact set starts at 10mm, and costs $35
It might cost you $5 for just a 10mm 1/2" impact socket alone......
Small severely rusted fasteners or those treated with red Loctite are most prone to breakage. The most effective solution is to apply heat to break the bond, then use a Vise Grip to remove the fastener.
The HF deep impact set {10 mm to 32 mm} was $20 a few weeks back. It's still reasonably priced today at $25. Regular impact is only $18. There are many HF stores in the US for quick exchange if defective.
https://www.harborfreig
https://www.harborfreig
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!