This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
These Kasa EP10P4 smart plugs are a compact 15A Wi-Fi option that works well for lights, chargers, fans, and other general loads. The newer design has relatively recent firmware support, and the Kasa or Tapo ecosystem makes it easy to keep smart devices in one app. Energy monitoring is available on other Kasa models, and the 2.4 GHz connection suits low-bandwidth home automation. Setup can be frustrating, some older units still need the Kasa app, and the EP10 lacks Matter support and a clear motor-load rating.
Home automation setups using lights, chargers, fans, or relay-controlled pumps, because the plugs handle general 15A resistive loads well.
They work well for everyday loads, but some users report connection and app problems, and one report says the EP10 design can let plugs fall out with heavier adapters. The newer EP10 also has more recent firmware support than the older HS103 line.
This EP10P4 model does not include energy monitoring or Matter support. If those features matter, the Tapo P110M 4-pack is the cited alternative because it adds both while still using 2.4GHz Wi‑Fi.
The EP10P4 is rated for 15A/1800W resistive load, which is enough for many normal devices, but it does not have the clearer motor-load rating that the HS103 line has. For directly switching a small motor, the HS103P4 is the safer pick on paper.
Yes. These plugs use 2.4GHz Wi‑Fi, which is the band typically preferred for IoT devices because it reaches through walls better and uses very little bandwidth.
It can be set up for scheduled on/off cycles, but one report says that scheduled turn-off/turn-on stopped working for a hardware reboot use case. If you need that automation to be dependable, that is a practical risk to consider.
I switched my smart plugs all to a mix of Tapo and Kasa products a few years ago. Both work reasonably well with the Tapo app but some older Kasa plugs still require the Kasa app to initially configure.I have not experienced any hardware failures or routines failing. However, you should be prepared with the shortcomings. 2.4ghz, sometimes frustrating to setup and they rarely receive firmware updates... If you can't easily get them working, it's probably best to return them and try a different product.
2.4ghz wifi is superior for most IoT. These take nearly zero bandwidth so your only wants are signal strength. 2.4ghz has superior penetration through obstacles.
Between those two, I'd buy the EP10P4 The EP10 is the newer design and TP-Link is still publishing relatively recent firmware for itHS103 is perfectly usable, but it's the older product line. One potentially important distinction: TP-Link explicitly rates the current HS103 for 1/6 HP motor loads, while the EP10 documentation only states 15 A / 1800 W resistive load. So my choice is:Normal lights, chargers, pumps controlled through another relay, TVs, fans, etc. → EP10P4.If you're directly switching a small motor → HS103P4 has the clearer motor rating.
The power needed for a 1/6 hp motor is way less than these are rated for.
Top Comments
Community Reviews
These Kasa EP10P4 smart plugs are a compact 15A Wi-Fi option that works well for lights, chargers, fans, and other general loads. The newer design has relatively recent firmware support, and the Kasa or Tapo ecosystem makes it easy to keep smart devices in one app. Energy monitoring is available on other Kasa models, and the 2.4 GHz connection suits low-bandwidth home automation. Setup can be frustrating, some older units still need the Kasa app, and the EP10 lacks Matter support and a clear motor-load rating.
Home automation setups using lights, chargers, fans, or relay-controlled pumps, because the plugs handle general 15A resistive loads well.
Households standardizing on one smart-home app, because these plugs fit a Kasa/Tapo ecosystem and show device energy use.
IoT devices on crowded Wi‑Fi networks, because 2.4GHz penetrates obstacles better and these plugs use very little bandwidth.
DIY tinkerers who want to reflash smart plugs, because the hardware can be repurposed for Tasmota or ESPHome with some network setup.
Anyone who needs a trouble-free setup experience, because 2.4GHz pairing can be frustrating and the app can have connection issues.
People who need scheduled power cycling for hardware resets, because the timer-based off/on routine can stop working.
Users who need dependable plug retention for heavier adapters, because the grip can be weak and plugs may fall out.
Shoppers who want advanced smart-home features or Matter support, because these plugs lack both.
Common Questions (5)
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
19 Comments
Sign up for a Slickdeals account to remove this ad.
The reflashing process does require a bit of software/network tinkering, but it's not difficult.
https://www.amazon.com/dp/B0DSJHFG69
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!