This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
These Kasa EP10P4 smart plugs are a compact 15A Wi-Fi option that works well for lights, chargers, fans, and other general loads. The newer design has relatively recent firmware support, and the Kasa or Tapo ecosystem makes it easy to keep smart devices in one app. Energy monitoring is available on other Kasa models, and the 2.4 GHz connection suits low-bandwidth home automation. Setup can be frustrating, some older units still need the Kasa app, and the EP10 lacks Matter support and a clear motor-load rating.
Home automation setups using lights, chargers, fans, or relay-controlled pumps, because the plugs handle general 15A resistive loads well.
They work well for everyday loads, but some users report connection and app problems, and one report says the EP10 design can let plugs fall out with heavier adapters. The newer EP10 also has more recent firmware support than the older HS103 line.
This EP10P4 model does not include energy monitoring or Matter support. If those features matter, the Tapo P110M 4-pack is the cited alternative because it adds both while still using 2.4GHz Wi‑Fi.
The EP10P4 is rated for 15A/1800W resistive load, which is enough for many normal devices, but it does not have the clearer motor-load rating that the HS103 line has. For directly switching a small motor, the HS103P4 is the safer pick on paper.
Yes. These plugs use 2.4GHz Wi‑Fi, which is the band typically preferred for IoT devices because it reaches through walls better and uses very little bandwidth.
It can be set up for scheduled on/off cycles, but one report says that scheduled turn-off/turn-on stopped working for a hardware reboot use case. If you need that automation to be dependable, that is a practical risk to consider.
I also like these however one of the reasons I bought them was to be scheduled hard reboot for some hardware and that scheduled turn off and turn on functionality seems to have stopped working for some reason. :-(
I switched my smart plugs all to a mix of Tapo and Kasa products a few years ago. Both work reasonably well with the Tapo app but some older Kasa plugs still require the Kasa app to initially configure.
I have not experienced any hardware failures or routines failing. However, you should be prepared with the shortcomings. 2.4ghz, sometimes frustrating to setup and they rarely receive firmware updates... If you can't easily get them working, it's probably best to return them and try a different product.
1
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
Do not buy the EP10, they are not reliable and have a defective design.
I presume to lower cost, the internal contact for the plug only partially grips the tip of the plug instead of the whole plug or further towards the middle. It makes it so plugs tend to fall out, especially for two prong plugs and heavier DC adapters. I've also found the wireless connectivity to be much less reliable compared to other smart plugs and switches I have installed in the house.
I like to keep all my smart stuff with Kasa/Tapo. You might find something cheaper, but then you might be stuck with a buggy app. It is really nice to see how much energy your devices are using.
I own a lot of these, they work not problem but they lack a lot of features and don't have matter, even TP-link, the owner of this brand, it's moving past them to the Tapo brand. The 4 pack of Tapo usually goes on sale for 29, model number being P110M (4 Pack).
They support matter and energy monitoring, UL certified (supposedly) and still 2.4Ghz WiFi
I have no experience with these but I love tapo cameras and with the functions the tapo cameras offer without paying for a subscription I would think tapo is the future. Go with the tapo one mentioned in earlier comments for sure
The EP10 is the newer design and TP-Link is still publishing relatively recent firmware for it
HS103 is perfectly usable, but it's the older product line. One potentially important distinction: TP-Link explicitly rates the current HS103 for 1/6 HP motor loads, while the EP10 documentation only states 15 A / 1800 W resistive load.
So my choice is:
Normal lights, chargers, pumps controlled through another relay, TVs, fans, etc. → EP10P4.
If you're directly switching a small motor → HS103P4 has the clearer motor rating.
2
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
These seem like they don't have as many features as some of the others like the Tapo ones mentioned. But these Amazon basics brand are just another option for like $26: https://a.co/d/06q5UNYz
1
Like
Helpful
Funny
Not helpful
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
Top Comments
Community Reviews
These Kasa EP10P4 smart plugs are a compact 15A Wi-Fi option that works well for lights, chargers, fans, and other general loads. The newer design has relatively recent firmware support, and the Kasa or Tapo ecosystem makes it easy to keep smart devices in one app. Energy monitoring is available on other Kasa models, and the 2.4 GHz connection suits low-bandwidth home automation. Setup can be frustrating, some older units still need the Kasa app, and the EP10 lacks Matter support and a clear motor-load rating.
Common Questions (5)
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
19 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
https://www.amazon.com/Kasa-Smart...r=8-9&th=1
I have not experienced any hardware failures or routines failing. However, you should be prepared with the shortcomings. 2.4ghz, sometimes frustrating to setup and they rarely receive firmware updates... If you can't easily get them working, it's probably best to return them and try a different product.
Sign up for a Slickdeals account to remove this ad.
I presume to lower cost, the internal contact for the plug only partially grips the tip of the plug instead of the whole plug or further towards the middle. It makes it so plugs tend to fall out, especially for two prong plugs and heavier DC adapters. I've also found the wireless connectivity to be much less reliable compared to other smart plugs and switches I have installed in the house.
https://www.amazon.com/gp/product...OZ3KS
They support matter and energy monitoring, UL certified (supposedly) and still 2.4Ghz WiFi
Hope it helps someone.
The EP10 is the newer design and TP-Link is still publishing relatively recent firmware for it
HS103 is perfectly usable, but it's the older product line. One potentially important distinction: TP-Link explicitly rates the current HS103 for 1/6 HP motor loads, while the EP10 documentation only states 15 A / 1800 W resistive load.
So my choice is:
Normal lights, chargers, pumps controlled through another relay, TVs, fans, etc. → EP10P4.
If you're directly switching a small motor → HS103P4 has the clearer motor rating.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!