Did this coupon
work for you?
work for you?
Product Name: | HART 20-Volt Cordless Impact Driver Kit, (1) 1.5Ah Lithium-Ion Battery |
Product Description: | The HART 20V Impact Driver Kit is the perfect solution for all of your fastening needs. Delivering up to 1700 in-lbs. of torque it is more than powerful enough for most projects. The integrated LED work light enhances visibility so you can confidently and accurately drive screws. The variable speed trigger gives you ultimate control of the driver from 0-2500 RPM. The ¼-inch quick-connect chuck makes switching driving bits quick and easy allowing you to drive multiple types of screws very quickly. On-board bit storage ensures that you’ll always be prepared no matter what kind of screw you are driving. This kit comes with a charger and a 1.5Ah HART 20V battery meaning this tool is compatible with all HART 20V batteries allowing you to continue to grow your HART tool collection without buying more batteries and chargers than you need! |
Manufacturer: | Hart Consumer Products, Inc. |
Product SKU: | 261213931 |
UPC: | 810022392386 |
The link has been copied to the clipboard.
74 Comments
Your comment cannot be blank.
Featured Comments
Battery and charger alone are selling for $69
https://www.walmart.com/ip/583860302
I've been happy with all my HART purchases so far. seems adequate for casual DIYer
https://www.walmart.com/ip/HART-2.../259844266
Someone may have to loosen over torqued lugs the next time, but if they are doing oil changes/brakes/etc themselves, and going forward they're only ever tightening and loosening them with this, they should be fine, since it will put them on tight enough, and can take off whatever lug nut it put on.
* Note to new users...you'll also need a set of impact rated sockets. Do NOT use standard sockets. They could shatter and cause serious injury.
* * If you're buying an impact driver for a larger project, consider buying one with a larger battery, or purchase another battery in addition (one to charge while using the other), as a 1.5Ah battery is going to drain quickly. Larger capacity batteries are also able to provide maximum current and thus maximum power more reliably than smaller batteries through a majority of the capacity as well.
Sign up for a Slickdeals account to remove this ad.
Someone may have to loosen over torqued lugs the next time, but if they are doing oil changes/brakes/etc themselves, and going forward they're only ever tightening and loosening them with this, they should be fine, since it will put them on tight enough, and can take off whatever lug nut it put on.
* Note to new users...you'll also need a set of impact rated sockets. Do NOT use standard sockets. They could shatter and cause serious injury.
* * If you're buying an impact driver for a larger project, consider buying one with a larger battery, or purchase another battery in addition (one to charge while using the other), as a 1.5Ah battery is going to drain quickly. Larger capacity batteries are also able to provide maximum current and thus maximum power more reliably than smaller batteries through a majority of the capacity as well.
Will 3/8 impact wrench not be able to take a lug nut off a car wheel? How is 1/2 different from 3/8? Thanks in advance for your response.
* Always hand thread lugs on the first few turns to avoid cross threading and damaging lug nut studs. Tighten until snug and rotation largely stops, and then go a bit past, maybe a quarter turn. Overdo it and again, you may shear a stud, and/or warp an aluminum wheel.
I'm not familiar with 3/8" impact wrenches, as all that I've ever seen or used are 1/2", but you can buy adapters to step them down to 3/8" or 1/4" hex if you want to use it for other work.
I started using the Ridgid 1/2" impact wrench 6-7 years ago, and it has been a workhorse. I've removed wheel lugs and axel nuts, driven giant lag bolts into decking and concrete, and have never had one issue with it. It's rated to 400ft/lbs but has tested at 450-500ft/lbs, which is 3.5x the power of this impact driver, and they've only gotten more powerful since then. We got it for around $140 with the 4Ah battery, charger, and case around 2015, with a lifetime warranty on the tool, charger, AND BATTERY (Ridgid warranties batteries, yes batteries, for life when part of a combo kit).
Hope the information helps.
Sign up for a Slickdeals account to remove this ad.
Yes it should be. If you take off lugs for work then get the "right" tool, but this should be completely fine for saving time at home or keeping it in your trunk.
I keep the Milwaukee m12 impact driver in my car for road trips and it takes lugs off of my civic in about 1/2 a second. Bigger vehicles or rusted vehicles will need more power obviously.
It's better to step down with a 3/8 adapter rather than step up to a 1/2. The only time it isn't is if length of the tool is an issue.
Testing on torque test channel has shown that there's almost no power difference between a 1/2 and a 3/8 in the same model line. (you do lose minor power to the adapter though, and significant amounts from extensions.)
Testing on torque test channel has shown that there's almost no power difference between a 1/2 and a 3/8 in the same model line. (you do lose minor power to the adapter though, and significant amounts from extensions.)
That's accurate. They did mention spending quite a bit having it made so they could test apples to apples.
But they've also tested socket mass having relatively minimal effect on the torque output. *unless you buy explicitly weighted sockets which weigh like 1.5 lbs*
Sign up for a Slickdeals account to remove this ad.
Apparently there is a solution for this issue in which you have to pretty much jump the impact driver battery. Either use a jump pack and some wires/blades, connect positive/negative, and jump it for a couple of seconds.