Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
241 results found matching

Show results for
$ - $
Filters
Filters
Filters
Post #51462736 added 07-06-2012 12:24 AM by eibgrad in Archived Deals
WDS requires *both* APs to support it and be configured for it. One of the problems w/ WDS is that unlike wireless B/G/N, it's not a wifi standard, so implementations often vary across manufacturers...
Post #51351296 added 06-30-2012 10:14 PM by poohbie in Archived Deals
I've wondered why after all these years, guest WiFi hasn't made it into the GUI for DD-WRT and Tomato. Stock firmwares make it so easy to set up. Tomato is making some progress, with the Toastman...
Post #51348776 added 06-30-2012 7:11 PM by Engineer in Archived Deals
Not sure if anyone trying to set up a guest SSID has used this guide or not but I'll throw it out there anyway: ...
Post #51360862 added 07-01-2012 12:05 PM by Engineer in Archived Deals
Why would you have to upgrade? Gigabit lan ports are backwards compatible. If you're doing it for only for internet access, won't help unless your connection speed is around/over 100mbps (give or...
Post #51359996 added 07-01-2012 11:15 AM by uws in Archived Deals
If this router is Gigabit, then I need to upgrade my pc's NIC to Gigabit. Any deals?
hmm, idk if it will be suitable, ive actually been using the 5ghz for very complex stuff and have it bridged to another in the other end of the house, 1080p videos running threw 3 tvs at the same...
Post #50947223 added 06-13-2012 11:53 AM by BilboFraggins in Archived Deals
From reading everyone's posts and what we have all received, I don't think Expansys is sending any refurbs. charsiubao007, first boot may take a while. Did you try pressing the reset button for 30...
Post #50955530 added 06-13-2012 5:35 PM by randabear7 in Archived Deals
If it doesn't boot there can BE no 30/30/30 reset. You probably messed with the firmware then found it was 'dead'. Even if the firmware is borked and the CFE has somehow been erased the unit will at...
Post #51030066 added 06-16-2012 10:14 PM by kcobra in Archived Deals
Recieved my Belkin routers today. After messing with them pretty much all afternoon and evening, here are my thoughts: 1. When running Tomato firmware on the router I would get about 10 Mbps less...
Post #51434034 added 07-04-2012 4:29 PM by rock304 in Archived Deals
Thanks for the great explanation. and thanks to steelwillj--I too don't like the reviews but have come to take Newegg reviews with a grain of salt along with the self tech rating system -- I still...
Post #51691080 added 07-16-2012 6:35 AM by newbie_Iam in Archived Deals
Have you upgraded to Belkin latest firmware or dd-wrt or Tomato ? I also got my router and would like to upgrade to Tomato. Should I have to follow dd-wrt instructions(said in Wiki) before...
Post #52510086 added 08-16-2012 10:16 AM by BuonaDomenica in Archived Deals
I flashed from DD-WRT to Tomato but forgot to get the http password via puttytel. Now I cant login after the upgrade. I also can't reach the CFE page either when I do a 30/30/30 reset. Any...
Post #50782538 added 06-06-2012 3:54 PM by larry123 in Archived Deals
Seriously this router has been great with the latest stock firmware. I was planning to use dd-wrt or tomatousb but I really have not found the need.
Post #50635180 added 05-31-2012 11:47 AM by teetee1 in Archived Deals
If you connect this router to your main router through wired connection while connecting your computers to this router through wifi, you get gigabit LAN connection but the name here for the router is...
Post #50677046 added 06-02-2012 2:42 AM by draeon in Archived Deals
well,if its in factory setting then belkin firmware is the initial installed firmware (no need to flash belkin) and you just need to flash dd-wrt and tomato. (follow the instruction in 1st page) ...
Post #50682222 added 06-02-2012 11:05 AM by J0812 in Archived Deals
Set everything up yesterday and thus far, seems to be working really well. Flashing DD-WRT/Tomato was far less challenging than I expected. By the second one, I really had the hang of it and did it...
Post #50686204 added 06-02-2012 4:26 PM by poohbie in Archived Deals
I set my Belkin with DD-WRT build 18946 to N-only, yet my LG Optimus V phone which only supports G still links up fine via WiFi. So I'm not sure if the N-only setting even works in this build.
Post #50949915 added 06-13-2012 1:23 PM by charsiubao007 in Archived Deals
No dice. Did the 30-30-30 reset. This unit is dead. RMA sucks.. Please allow up to 30 days from the day you return your package for your return to be processed and either refunded or...
Post #50980604 added 06-14-2012 3:59 PM by rickon66 in Archived Deals
I hope mine comes in "live", I ordered on the 8th and expected delivery is the 18th-they must deliver by covered wagon!
Post #50876246 added 06-10-2012 6:48 PM by randabear7 in Archived Deals
this shows the antenna solder points for the two internal antennas. http://infodepot.wikia.com/wiki/Belkin_F7D3301_v1
Post #50898228 added 06-11-2012 5:35 PM by randabear7 in Archived Deals
The radios are ran in either N mode or mixed mode (b/g/n). The radios can't dynamically decide what clients are 'active' at a given time. You need to do some reading. This isn't your personal tech...
Post #50875646 added 06-10-2012 6:08 PM by yazyazoo in Archived Deals
Did you just use the Router's GUI config page to search for the update or was it the update that was downloaded from the site?
Post #50889248 added 06-11-2012 11:03 AM by randabear7 in Archived Deals
All these wireless N routers can support legacy wireless clients when set to broadcast in mixed mode however your network will only be as fast as the slowest client. So if you have N and G clients on...
Post #50526880 added 05-26-2012 9:07 AM by nullstring in Archived Deals
so, I am thinking about buying two of these for my parents and putting tomato (or maybe openwrt) on them. Any comments about the stability using tomato? Are these rock solid with open source...
Post #50586500 added 05-29-2012 3:07 PM by ken.yong in Archived Deals
Followed dd-wrt link ("How to setup multiple BSSIDs using DD-WRT") to setup 2 BSSIDs. Can connect to both BSSIDs, however, the virtual interface can only be connected locally (i.e. no internet). ...
Post #50464248 added 05-23-2012 4:53 PM by J0812 in Archived Deals
Going to grab two of these based on recommendations in this thread. Planning to use one as the main router and the other as a bridge upstairs to connect TV components. I'm reading over the...
Post #50461446 added 05-23-2012 2:21 PM by yeba in Archived Deals
I bought my 4th one recently and started testing the 3rd unit's wireless N capability. I loaded the tomatousb firmware cant seem to maintain 300Mbps, best is from 54-130 Mbps. My laptop is using ...
Post #50461966 added 05-23-2012 2:48 PM by oopsz in Archived Deals
Sounds like you're using it in 20 mhz mode. 300 Mbps (really maxes out at 270) requires a double channel - 40 mhz of bandwidth.
Post #50462990 added 05-23-2012 3:43 PM by oopsz in Archived Deals
Hmm.. then is your wireless card 300 mbps capable? Several models of wireless-n cards are only 150 mbps compatible. See for example:...
Post #50546748 added 05-27-2012 5:18 PM by DrGroove in Archived Deals
Can you post exactly how you added the external antennas?
Post #50590024 added 05-29-2012 5:52 PM by DonV1962 in Archived Deals
Happy camper here. Running Tomato and just plugged in my Rosewill 2 bay USB enclosure. Changed the network name in Tomato to match mine and both the drive show up. Streamed to my WDTV Live with no...
Post #50583928 added 05-29-2012 1:24 PM by earlrod in Archived Deals
If I use this router as an repeater, will I get 1 gigabit speed or half of it using the LAN ports? TIA
Post #50582222 added 05-29-2012 12:21 PM by ken.yong in Archived Deals
Great deal! I got one and installed dd-wrt and very happy with it. Installed my USB printer and it's all good. One quick question though: Trying to set up a guest network with separate subnet's...
Post #50683860 added 06-02-2012 1:05 PM by corenom in Archived Deals
nevermind... forgot to enable dhcp
Post #50533613 added 05-26-2012 6:10 PM by eibgrad in Archived Deals
http://www.tinkernut.com/2010/08/30/how-to-make-a-cheap-wifi-radio/
Post #50417010 added 05-21-2012 8:47 PM by wikipost in Archived Deals
General Information User Manual F7D3301 v1 belkin.com] READ THE GUIDES BEFORE YOU FLASH! DO NOT FLASH FIRMWARE OVER A WIRELESS CONNECTION! ALWAYS FLASH OVER A WIRED ETHERNET CONNECTION! ALWAYS...
Post #50547590 added 05-27-2012 6:31 PM by geant90 in Archived Deals
i just took off the antennas from my old asus router and drilled 2 holes and soldered the antennas. Even those these antennas suck within the same range about 10 feet on my half ass N netbook wifi im...
Post #50546808 added 05-27-2012 5:24 PM by K6-2 in Archived Deals
Not hard. When you post or edit, hit "Go Advanced" (if you don't have that option set as default), scroll down to the "Manage Attachments" button. A new window will open with places for internet...
Page 1 of 7
1 2 3 4 5

More Results from Amazon.com See more at Amazon

More Results from Walmart.com See more at Walmart

More Results from Ebay.com

Didn't find what you were looking for?

We're displaying limited results because of the following settings:

  • Deals with Any Rating
  • Deals from Any Time
  • Deals from 26 forums
  • Deals filtered by and
  • Searching within Entire Threads

If you want to relax this search, click here to reset all search parameters. You can also adjust them by using the filtering options on the left.