Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
34 results found matching

Show results for
$ - $
Filters
Filters
Filters
Post #51364696 added 07-01-2012 4:22 PM by jtl090179 in Archived Deals
great price for individual pieces, so so price for the set. picked up two 13mm because i just lost one at work and now i have one and a backup. now to see if how they stack up against...
Post #51362566 added 07-01-2012 1:53 PM by RonPaulFan in Archived Deals
I can not check out and always have a problem checking out. I get a Data Error and am told to call a number and they can never figure it out. Oh well.
Post #51378534 added 07-02-2012 9:35 AM by Minger in Archived Deals
Too bad it's not available for delivery..why is there no Lowes in Madison WI? :(
Post #51378714 added 07-02-2012 9:43 AM by Wlshbone in Archived Deals
I have seen them say new lower price before and it stays down for a few weeks and then usually goes back up.
Post #51372644 added 07-02-2012 3:45 AM by Anime in Archived Deals
The Craftsman Cross Force ratcheting wrenches are probably the best ones of the "cross" design, followed by the very similar GearWrench X-beams. However, the Craftsman Cross Force is...
Post #51379158 added 07-02-2012 10:00 AM by Anime in Archived Deals
You re-posted the same link I used. Might want to read what it says - "temporarily unavailable". They might have more "new" Chinese versions in August. Might.
Post #51361808 added 07-01-2012 1:03 PM by bittul in Archived Deals
It might have to do with your local store availability. Try clicking on "change store". Hope it helps. Also, if you're getting both sets, you qualify for free shipping over $49.
Post #51363282 added 07-01-2012 2:38 PM by of_the_troops in Archived Deals
What's the benefit of the twist?
Post #51386102 added 07-02-2012 2:17 PM by decolores9 in Archived Deals
I had not, and the wiki is known to be unreliable. In addition, a lot can change in 18 months. After checking the current filings, we find: - shc had $41.5 billion in sales in 2011 - Lowes had...
Post #51371968 added 07-02-2012 1:53 AM by nimrod777 in Archived Deals
From the one review available, on the metric set: Changed out an alternator using nothing but this set. Twist design allows you to get more torque due to putting pressure on a flat surface instead...
Post #51386370 added 07-02-2012 2:28 PM by Ivelweyz in Archived Deals
What?
Post #51398174 added 07-03-2012 3:36 AM by decolores9 in Archived Deals
Sears clearance is store specific - and they are not on clearance at my store. The store manager also confirmed that they are not discontinued, so the clerks at your store may be giving you...
Post #51411794 added 07-03-2012 2:22 PM by BloodGain in Archived Deals
It is? Where's your reference? I've read several independent reviews that say otherwise. However, because the gap was so large while the revenue was so close, I did check Wikipedia's references --...
Post #51358466 added 07-01-2012 10:01 AM by zmwang in Archived Deals
not a bad deal.
Post #51362430 added 07-01-2012 1:44 PM by BlkBimM3r in Archived Deals
In for a metric set.. Thanks OP! Edit: couldn't check out. The 2 stores near me Burbank (1) & mid city (0). Added metric set to cart for store pickup at Burbank, then it says the quantity you...
Post #51363504 added 07-01-2012 2:55 PM by pmarin in Archived Deals
The benefit is that if you have something that you really have to press hard against, (or, even though it's not recommended, strike it with a heavy object), you have a "flat" surface. If you've ever...
Post #51375198 added 07-02-2012 7:10 AM by decolores9 in Archived Deals
The Craftsman Cross Force has not been discontinued and is readily available at any Sears store or online. sears.com] However, comparing these to the Cross Force is an "apples and oranges"...
Post #51373884 added 07-02-2012 6:01 AM by GR00316 in Archived Deals
I get that too but can usually fix it by creating a new address instead of using a saved on. Even if the address is exactly the same except for the "name" you give the address. That has always fixed...
Post #51376606 added 07-02-2012 8:23 AM by Anime in Archived Deals
Um....what? Oh, you're not aware the Cross Force and X-beam wrenches I'm talking about are the ratcheting ones. Yeah, they made those. ...
Post #51377624 added 07-02-2012 9:04 AM by decolores9 in Archived Deals
No, thanks for clarifying what you meant. In any event, they haven't been discontinued, either, and are readily available. Given the lifetime warranty on both, I suppose one question is...
Post #51398994 added 07-03-2012 5:06 AM by decolores9 in Archived Deals
You are certainly entitled to your opinions, but Sears confirms they are NOT on clearance nationwide. Sears, like many stores, does clearance products that are not selling in sufficient quantities...
Post #51386688 added 07-02-2012 2:40 PM by solara689 in Archived Deals
The tool do look very thick & sturdy! I would buy...If I do not own 20 pc. Gear Wrench ratchet combo & 8 pc combo :D
Post #51380370 added 07-02-2012 10:46 AM by decolores9 in Archived Deals
Must just be your area - says "add to cart" for me. These are also available in the store, at least in my area.
Post #51398324 added 07-03-2012 3:52 AM by Anime in Archived Deals
ALL of the Cross Force wrenches, ratcheting and not, are on clearance nationwide. There may be a few markets where this isn't the case, but they are just slower. The Craftsman and Gearwrench...
Post #51400954 added 07-03-2012 7:08 AM by GR00316 in Archived Deals
I get that too but can usually fix it by creating a new address instead of using a saved on. Even if the address is exactly the same except for the "name" you give the address. That has always fixed...
Post #51396576 added 07-02-2012 11:52 PM by Anime in Archived Deals
I'd suggest you head to your store and buy them in-store then. They are on clearance for 75% off. The Craftsman versions aren't the safest best, not because of Sears' future, but because...
Post #51359824 added 07-01-2012 11:07 AM by TylerJ_COE in Archived Deals
I can't add to cart for the sets
Post #51363180 added 07-01-2012 2:29 PM by Ivelweyz in Archived Deals
Seeing that craftsman hasn't been all that good for a decade or two, they're about the same. It's basically all about the warranty, which is lifetime.
Post #51358512 added 07-01-2012 10:03 AM by sinners in Archived Deals
How do they compare to the craftsman?
Post #51378286 added 07-02-2012 9:26 AM by aggrex in Archived Deals
Non-ratcheting Crossforce or X-beam are the better choice for frozen rusted bolts/nuts. Hopefully some version of these remain available from either company
Post #51381488 added 07-02-2012 11:29 AM by BloodGain in Archived Deals
I respectfully disagree. Have you looked at their FY 2010 numbers on Wikipedia? Sears Holding Corp posted only $150M net income, while Lowe's posted $2B. That's 13x as much, while their revenue was...
Post #51357458 added 07-01-2012 9:06 AM by bittul in Archived Deals
Lowes has the Kobalt Power Cross "Twisted" Ratcheting Combination Wrenches (both standard and Metric) marked down to $5.98 (orig prices vary by size. Bet $11.97 to $18.47). Standard: 5/16":...
Post #51373670 added 07-02-2012 5:47 AM by 3Wire in Archived Deals
Can't say for sure, but the web pages for these tools indicate that these are now a "new lower price". If that's true and this is a permanent pricing structure then there is no time constraint on...
Post #51424056 added 07-04-2012 5:03 AM by decolores9 in Archived Deals
I thought it was understood that the wiki is unreliable. Guess I should know better, my students keep trying to cite it. The reason is that anyone can post anything there. Some people post well...

More Results from Amazon.com See more at Amazon

More Results from Walmart.com See more at Walmart

More Results from Ebay.com

Didn't find what you were looking for?

We're displaying limited results because of the following settings:

  • Deals with Any Rating
  • Deals from Any Time
  • Deals from 26 forums
  • Deals filtered by and
  • Searching within Entire Threads

If you want to relax this search, click here to reset all search parameters. You can also adjust them by using the filtering options on the left.