Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Can't be the port, both GPUs were used recently with a DVI connection. I will check the other options.
Thanks
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Basic question: You moved a working board and parts to a new case. Did you make sure you used standoffs under the board in the new case in all the locations a screw goes thru the board to install...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Build won't post so I can't get into BIOS. I don't want to put my 2500k in their either, unless this is definitely the problem. Also, since the motherboard doesn't support onboard video, wouldn't it...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
According to MSI's page, your cpu requires the bios found in 7673v51.zip.
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
iI tried the 2500k in the msi board and got the error. iI tried the i3 in my new board and it worked. so the problem is definitely the board, specifically the updated BIOS. looks like I'll need to...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Sometimes, this happens when you forget to plug in the 4/8 pin EPS12V plug by your CPU socket. Make sure that is plugged in and working.
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Didn't think of that, you could be right.
Motherboard:
Onboard Video Chipset
None
CPU:
Integrated Graphics: Intel HD Graphics 2000
Not sure where to go from here though...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
You 100% sure that the CPU is supported?
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Old Build
MSI P67A C43 B3
i5 2500k
Corsair 1600MHz RAM
MSI 7770 GPU
600W OCZ PSU
WD HDDs
New Build for a friend with parts from old build
MSI P67A C43 B3
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
I figured the one listed was the minimum and any other would work. Still the MB is giving me a GPU error, not CPU; although it seems it could be related to the CPU's integrated graphics. If the BIOS...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
I'll check the manual. Also, the RAM is in the closest slot to the CPU.
Alright, well thanks for the help. I don't think I can eBay it and there's no use in keeping it so I'm going to try to...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Some motherboards have a jumper... with various settings
1) normal, 2) config, 3) recovery
Also move single ram to slot nearest cpu
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Unfortunately, MSI's support was useless.
I have swapped out the video card with no changes.
It didn't matter to me that it came with no video because I was using a 2500k without graphics...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Not if you are careful
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
One thing I didn't see mentioned. I've had friends build their own machines and place the motherboard in the case...and unknowingly the backside of the board was making some undesired contact with...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
The board was discontinued from Newegg (for its age, not problems), so I don't think they're checking the reviews there anymore.
Thanks for the info. I don't have a parallel port on my PC and I...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Check for other solutions, as well. When I built my PC, I plugged my Power Button lead into the LED port. Also, make sure that the power button, if it is on the front bezel, is plugged into the case...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Write a negative review at NewEgg.com because MSI seems to pay attention to them and respond there.
MSI is probably the worst when it comes to updating the BIOS, and the methods they recommend are...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Remove CMOS battery for 30 minutes
Double check all connections
Reseat RAM reseat CPU and heatsink
Only connect bare mimimum (OS harddrive, one stick ram)
Double check correct standoff...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Not according to MSI's page. Ref: http://us.msi.com/product/mb/P67A-C43--B3-.html#/?div=CPUSupport
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
You need a port to connect to... odd motherboard has no ports at all to connect video.
If thats the case then you have to use a separate graphic card. I would try two different ones if one isn't...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
I have been trying two separate cards. A 7770 and a 4670, I get the same beep code with both.
I flashed the most recent one, I assume it would support my CPU.... right?
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Go into BIOS and disable the on-board motherboard video, since the i3 will have better.
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Doesn't that processor have built in video?
Could that be the issue?
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
I'd still post a negative review there. It never hurts to warn others of incompetence and poor customer care.
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
RAM isn't the issue, I've tried a few different sticks. I updated a few posts back, using the DVI output on the three GPUs I tried seemed to be the problem. I used the VGA output and it posted...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
So I tried two different GPUs, but with both I used DVI. Today before replacing the board I decided to use a VGA cable as one final test and it posted. So for whatever reason, neither GPU worked with...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Plenty of possibilities:
A) Damaged DVI cable
b) Damaged DVI port
c) Your board was built with VGA has primary before installation of any OS.
D) Bad board
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Yes. I posted a few posts back that I got it working. I had tried 3 GPUs with DVI connections and they didn't work. I tried a VGA output instead and it finally worked.
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
If you remove the memory and then power on the computer do you hear a missing memory beep? Hopefully you do.. in which case it's a sign that the system is functioning at least to some capacity.
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Will the onboard video run though when the motherboard doesn't support it? No DVI, VGA, or HDMI ports on the motherboard. I'll try the other steps though. I may take it completely out of the case,...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Unless you can post, get video and reflash with the right BIOS, then I don't see a solution for you. Even then BIOS reflashing is not a sure thing, we're just making an educated guess here about...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
Yes http://us.msi.com/product/mb/P67A-C43--B3-.html#/?div=CPUSupport
It just needed a newer BIOS. I flashed the most recent one.
Also, some other things I've done:
Cleared CMOS
Tested GPU in...
Build won't Post
Expired
Thread created 03-08-2013 by c_morris14
0 Score
33 Replies
2,263 Views
You mentioned that you thought it might be the BIOS upgrade in your first post. First hunches deserve careful consideration. Based on that and what we read on MSI's site, there is a chance that is...
