High-precision magnetic induction knob allows control of focus, zoom, and camera movement in select operation modes of the gimbal, including pan and tilt modes. |
Low-power LCD touch panel, in combination with the joystick and handwheel, allows for easy adjustment of all the gimbal's settings. It slides left/right to display different setting options. |
A beveled angle design prevents obstruction of the camera screen during shooting, allowing for better framing and monitoring. |
The AK4000 is designed with a fixed mounting plate and comes with a quick release plate. The fixed mounting plate also supports the Manfrotto PL501 quick release plate for more flexible compatibility with tripods and other camera supports. |
The AK4000 features an M4 kernel MCU, 0.02° high-precision magnetic encoding sensor, and w5 generation control algorithm with correction speed of 2000x per second, all adding up to allow high-precision operation. |
The gimbal can be connected over Wi-Fi to compatible devices to control photo/video capture, focus, zoom, sensitivity adjustment, white balance, and exposure value, as well as to switch modes. At the same time, the included Feiyu ON iOS/Android app can connect to your camera via Bluetooth to set up various other parameters. |
Four included 18650 lithium-polymer batteries (2200mAh each) install into the handle to provide up to 12 hours of battery life. |
The roll and tilt direction are fixed and the camera moves left/right, according to the movements of the user's hand. |
The roll direction is fixed and the camera moves left/right, up/down, according to the movements of the user's hand. |
The orientation of the camera is fixed. |
All three axes of the gimbal follow the user's hand movements. |
One of the selectable modes of operation is an autorotation mode that allows you to assign a pre-set travel route for standard video capture as well as time-lapse photography. |
A 1/4"-20 threaded mounting hole on the bottom of the handle allows extending the length of the gimbal with an extension rod (included with the AK4000), as well as mounting it on various other supports. The gimbal also offers 1/4"-20 threaded holes in the following locations for attaching accessories: on the top of the sliding arm of the tilt axis, behind the tilt motor, at the front of the fixed plate, and on the pan motor. |
8.8 lb Payload |
Angled Motor Arm |
360° Pan, 230° Tilt, 360° Roll Motion |
Handwheel for Camera Movement/Focus/Zoom |
Optional Follow Focus Accessory Support |
Digital Focus & Zoom with Select Cameras |
Touchscreen LCD Smart Panel |
Feiyu ON iOS/Android App |
Extension Rod Included |
Manfrotto PL501 Compatible |
0 Comments
Your comment cannot be blank.